Ohh, thanks.
Ohh, thanks.
Does flashing to the asus bios actually LOWER the voltage? Because I can't clock as high now by a few mhz. I'm going to pencil mod soon.
ya, flashing my asus bios lowerd my voltages. I guess it's fine though as it unlocked higher clocks.
Yo, OP, do you have an asus bios that DOESN'T lower stock voltages? Cause I need one.
This BIOS has correct checksum (works in beta 8.8) and upperlimit is set to 720mhz instead of 700.
The BIOS version is also newer than all the others i've seen
http://www.techpowerup.com/vgabios/2...12.080807.html
Edit it in RBE 1.3 and set 1.158v (max) on 3d, and you're in good shape. Also make sure you update the fan-settings, as the current ones in this version are bugged (stays at 30%).
If anyone has any BIOS'es with a higher upper limit and correct checksum, please let me know.
Leonarderman - do you have a visiontek lightly overclocked hd4850 bios?
Are these bios preconfigured with higher fan settings too for a lower idle and load?
Thanks.
Can I use some other's (ie Sapphire/Asus, etc) Bios on my Gecube 4850 ? I havent recieved the card yet. Where can I find a Gecube stock bios ??
I have WC and willing to use 1.4v with 850/1100, Lets hope it turns out good.
i'd like to request one for the visiontek hd 4850 as well
here is the original bios in a zip file. you'll have to unzip it first.
Is there a HIS 4850 Bios?
Quote:
Originally Posted by BeastNotro
Here's your HIS HD4850 Bios file: HIS HD4850 Bios Modded
Core Upper limit 800MHz
Mem upper limit 1300MHz
And don't change anything! :rolleyes:
Quote:
Can I use some other's (ie Sapphire/Asus, etc) Bios on my Gecube 4850 ? I havent recieved the card yet. Where can I find a Gecube stock bios ??
I have WC and willing to use 1.4v with 850/1100, Lets hope it turns out good.
Yes, you can use sapphire/Asus's HD4850 Bios because they're the same. You can find your stock Bios below. Let's modify it with RBE1.13 :D
http://www.techpowerup.com/vgabios/1...12.080602.html
Quote:
Leonarderman - do you have a visiontek lightly overclocked hd4850 bios?
Are these bios preconfigured with higher fan settings too for a lower idle and load?
Your Bios below attachment.
Default Core 675MHz / Mem 1050MHz
Upper limit core 950MHz / Mem 1250MHz
Fan auto cool 50oC---Fan40% ====> max 95oC----Fan100%
Bios checksum corrected! ;)
Quote:
Originally Posted by leonarderman
Thanks a ton!
Can you change the core limit a bit higher to say... 1100 or so?
For subzero benching purposes of course! :)
Quote:
Originally Posted by shimmishim
Changing the core limit higher 1100MHz is easy but I think it's not needed. Before I used Hex Editor to change Core/mem upper limit, but now You can use RBE 1.13 to change it. If you want a higher Core limit, think You should do it with RBE 1.13! Well done! :D
Thanks leonarderman for the visiontek bios - but quick question - why is it 675/1050 while the other "lightly clocked" versions are 700/1100?
Is it that the visiontek can't handle it? I bought a preflashed visiontek 4850 off of ebay for a decent price (used) set at 725/1100 but under 3dmark06 and Vantage appears unstable since it pauses/jumps. Do you think 700/1100 would be ok?
Quote:
Originally Posted by LagunaX
Someone sent to me a problem with Bios Sapphire Lightly Overclocked Core 700/1100MHz. I have tested with my card and didn't see any problem. But They say it make their card unstable! :( So I think 675/1050Mhz are enough to use. You can Overclock higher with CCC + AMD GPU Tool.
Please note: combining CCC + AMD GPU Tool to be best Performance of Overclocking! :D
Hey, this happened to me yesterday! I was playing Space Siege with 730/1100Mhz just fine, then I went to play some other game (I think it was GRID...) and bang! VPU recovery error and tray notification!Quote:
Originally Posted by HKPolice
After that, I couldn't play any other game (even Space Siege which was runnning fine) with that OC... I had to go back to 700 core or something like that. The 2D clocks also changed from 160/500 to 160/750 which was odd...
Then I remembered this thread and saw your post. I went and delete the profiles folder and I have everything ok again.
Is there any way to go around and prevent this protection from kicking in? I don't want to use a fixed BIOS (been there).
Thanks :)
Actually RBE 1.13 doesn't allow you to change the limits according to the creator of RBE. He said 1.13 will be the shortest lived version. He will have a 1.14 out very soon.
Okidoki :)Quote:
Originally Posted by shimmishim
Anyone knows if the new version will let us change ONLY the UPPER LIMIT GPU without modifying the actual core frequency? So we can OC with CCC safely...
Thanks
Quote:
Originally Posted by shimmishim
Oh yeah! I saw the problem in RBE1.13 :shrug:
I Hope RBE1.14 will be out soon! :rolleyes:
Factotum, I'm using this modded BIOS you posted with my card right now... will it work with Catalyst 8.8 or will I get a black screen?Quote:
Originally Posted by Factotum
Also, can anyone provide me with a reference Sapphire BIOS with JUST the core upper limit raised to 800 that can work with Cat. 8.8?
Thanks in advance :D
BTW, I swapped my cards stock cooler for this:
http://www.monocromatica.com/fez/ATI/DSCF9027.JPG
Do you guys think it will let me achieve higher OC with a slight pencil mod?
Actually tried my ebay bios modded visiontek hd4850 on another motherboard. Stable no artifacts 3dmark06 and Vantage. Bios set 725/1125. Fan set to idle mid 50's and not get past 65 load. Works with CCC 8.7, haven't tried 8.8.
For you guys to play with if you want.
Custom hd4850 bios 725/1125 fan 55-65 c.
http://rapidshare.com/files/139289043/RV770.bin
RBE v1.14 is available now!
Here are the new things:
v1.14
- Fixed bug with method one overdrive hack not working. Should run fine now.
- Added fan control for 4870 X2. Completely new controller chip, was a big pain in the ass to code... :-/
- Made spin up fix, powerplay functionality and voltage decrease in the one-click update for 4xx0 cards seperately selectable.
- Fixed WinFlash check sum correction bug.
- Added and fixed a lot of small things. Too many and too minor to mention all... :-)
Please tell me your opinion about everything! :)
Here is the .rom file if you prefer to use winflash - worked fine for me.Quote:
Originally Posted by LagunaX
http://rapidshare.com/files/139312923/4850new.rom
is that saphire the reference model? If it is, none of you guys that have a stock 4850 need a different bios because of the pcb is the same
Thanks BAGZZlash for the 1.14 quite fast :)
Why is the HD 4850 limited to only 720 Mhz (with the method 1-Hash)...at least 750Mhz or so would have been nice :(
honestly, it should have been 740mhz, that way ati could have protected the 4870's market but please customers, my guess is the stock cooler couldn't handle above 700mhz very well and then they'd be replacing a lot of parts due to their CCC ocing policy
leonarderman, would it be safe for me to use RBE to up the voltages for your modified Visiontek 4850, and apply the fan spin up fix? If not could you please do that? Thanks.