Just bought a X2 3600+ with an Anus M2A-VM HDMI for a little fun, first AMD since my old Opty 170 that I sold last Sept when I went to the dark side with an ES E6600 :woot:
I'll post torture results when it arrives :D
Printable View
Just bought a X2 3600+ with an Anus M2A-VM HDMI for a little fun, first AMD since my old Opty 170 that I sold last Sept when I went to the dark side with an ES E6600 :woot:
I'll post torture results when it arrives :D
* AM2 Brisbane X2 3600+
* CAALG 0708UPFW
* DFI LANPARTY 590 M/2
PS take at least 10c of the temps.. they're way out on every cpu I put in this board.
2800Mhz 8hr stable @ 1.30/1.31 STOCK heatsink 24c Ambient.
http://img183.imageshack.us/img183/7...munderveb5.png
3120Mhz 8hr stable @ 1.44 - Big typhoon 23c Ambient
http://img407.imageshack.us/img407/4...ongtermhp8.jpg
3300Mhz super pi stable @ 1.55v , cold water :)
http://img407.imageshack.us/img407/693/3300waterqn4.jpg
She's a goodie :)
well i was able to run prime for 2 hrs. will leave it overnight sometime when im not using the machine.Quote:
Originally Posted by SaFrOuT
http://shrani.si/thumbs/300x9vcore10czm.jpg
this mobo overlots a lot
1.2875v set in bios....damn cpu-z doesn't read right voltage, only booster or probe2 does, why?????
Hi guys!
I have one question and i think you could help me!
Do you think an x2 4800 ccbwe have coldbug?
I put it on a vapochill LS.
Thanks!
I think no major cold bug.Quote:
Originally Posted by EDORiAN
I can't do OC over 3GHz. I don't know why... 1,55 isn't enaugh... grr... but 2800 on 1,425 stable is good for me... I have freezer 64pro on 1400rpm.
Maybe you hit the roof, but I got to say, freezer 64 pro ain't excactly high end, mid end and tops, so you might want to try out the BigTyphoon with the 120mm fan on it ... that's high end air... I might stretch it to say the new stock cooler for Opties and x2's are also, you know the one that has got copper on it? :) But freezer? Nope. That may be where you are blocked.Quote:
Originally Posted by kev
Yes... I think ur right ;) But it runs on 2900 @ 1,475 V but i don't need it :) I think in the future i will make some vmod(pencil mod) on ma 7900gs, change delta and make some high oc on diffrent cooling on my cpu :D.Quote:
Originally Posted by freakBYnature
:rolleyes:
Did some tweaking of my CPU and RAM. THis is what i end up with
opty 170 CCB1E XXXX (cant remember :D)
http://i7.photobucket.com/albums/y275/knobi/2-9.jpg
http://i7.photobucket.com/albums/y275/knobi/2-8.jpg
http://www.directupload.net/images/0...p/PamJV4K4.jpg
6000+ @ 3200Mhz @ 1.425 (in BIOS), RAM: DDR533@DDR1168 - 2.1V - Micron D0GMH
note on testing:
i use 2x regular superpie since it seems to be the best way to test
it would freeze up when OCCT (OCCTPT1.1.0) reported no errors
Question: Why use prime95 instead of just using orthos (orthos_exe_20060420), the new sp2004 ? :shrug:
s939 3800+ x2 ADA3800DAA5CD CCBWE 0535SPMW
playing with it on air (thermalright HR-01)
system in sig
last stable superpi @:
1.475v (bios option) 1.424v (cpuz1.8)
2.55 GHz 10x255 MHz
1/2 mem divider (for testing)
cpu temp on load: 41°C
core1 temp on load: 39°C
core2 temp on load: 43°C
ambient temp ~26°C
Currently testing:
2.6GHz @ 1.582v (1.4*113%), 1.520-1.536v cpuz 1.8
Since my memory maxes out at 255-265 this isn't so bad, since I'll just run it at a smooth 1:1 ratio :) (see there is a bright side to everything ;) )
Will post updates!
:toast:
update 1:
last stable at 2.68GHz
bios set to 1.475*110% (=1.6225v)
cpuz reports 1.568v
superpi and orthos for 2 hours
At:
1.65v (1.5*110%) cpuz: 1.600v
2.69GHz
superpi ok but orthos freezes comp
core 1: 55C
Core 2: 59C
I don't see the point of going higher on air :shrug:
it might even be dangerous :D
update 2:
Stable at 2.6
http://img106.imageshack.us/img106/7...rorthosbn9.jpg
Tested again at 1:1 with ram. 2600MHz cpu, 260 MHz ram :)
update 3:
NOT stable. RAM fails at anything above 250MHz. Stuck at 250MHz ram/ 2500 MHz cpu 1:1 for now.
http://valid.x86-secret.com/show_oc?id=201693
best I can get for a suicide shot from my 3800 x2 939. Stable @ 3006MHz.
what voltage/cooling?Quote:
Originally Posted by ben rogers
I maxed out my FSB.... :[ VIA FTL!
http://valid.x86-secret.com/show_oc?id=201365
http://i24.photobucket.com/albums/c31/kakor/3-1.jpg
Highest I have gone is 3065.
1.66v according to speedfan - 1.7v set in BIOS.Quote:
Originally Posted by KoHaN69
Cooling is an artic cooling freezer 64 pro with an 80mm fan as I snapped the 120mm off by accident.
For 3006MHz, same cooling and 1.55v.
Cheers
http://valid.x86-secret.com/show_oc?id=202127
really the best I can do now, anything more reboot before I can save the validation file. 3217MHz.
Anyone seen this stepping before? lfcbf 0650upmw x2 3800 windsor
how did you get it to boot over 310fsb, with my brisbane, i cannot get my board to boot over 310fsbQuote:
Originally Posted by mAJORD
here is my old:
http://img184.imageshack.us/img184/3743/25ghz125ci6.jpg
and my new X2 4000 65nm
http://img368.imageshack.us/img368/543/unbenanntkx1.jpg
I have the LFCBF 0648XPKW, 3800x2 Windsor in my kids cabinet, but it's a real cheap mobo, so without any voltages to play with it's kinda limited how much I get out of it. Testing right now as we speak on 2280mhz orthos, but that's with a big fking fat divider, 266mhz divider or cpu/8 as seen fro cpu-z, so I'm actually underclocking the PC2-5400 RAM right now. I'll see how much I'll get out of the cpu and fine-tune it later. It came with the fking alu-brick sht! So I put the copper cooler that came with my Opteron 170 on it, since I'm using the BigTyp 120 VX myself. Had to put some fans on RAM aswell since they are stuck really close to the cooler.Quote:
Originally Posted by LIKMARK
EDIT: Didn't even get 2.4 GHz on stock volt, which is 1.25V, so I'm kinda disappointed, but I'm testing it on 2150 Mhz which gives me DDR716 4-4-4-12-15 1T on 2volts to RAM (volt to ram is the only volt choice I got on this fking MSI K9N NEO-F mobo, but only up to 2.2v). The faster RAM speed atleast gives the kid a quicker loading time for the games he's playing.
Hi guys! New to the forum.
I have a Brisbane 4800+ and an Asus M2N-E mobo and I have a hard time overclocking. I think the problem is that the bios only let me get the RAM voltage to 1.95:shrug: So if i try 3.0,2.9 or 2.8GHZ the systems freezes or fails in orthos:mad: What is a good combination with that RAM voltage with out compromising HT speeds.
Any advise is apreciated!
@freakBYnature: I've forced my x2 3800 up to 2550, but that's the absolute max (at safe volts) it's a rev f2, and they are known to oc poorly.. On the bright side I can run my ballistix and cruical value D9HNL at DDR2 832Mhz as of now.
considering a brisbane now...
http://img473.imageshack.us/my.php?i...2550mhzun4.png
http://valid.x86-secret.com/show_oc.php?id=209163
@savholic: your mobo sucks at oc'ing, if it is anything like the MN2-E SLI, the voltage options are just ridiculus, max vcore at 1,25..... You'll need some serious modding..
How much volt on vcore you think is safe? I would say 1.475 also is supersafe.. even 1.5 - on high end air cooling. I just ordered a zalman 9700LED from komplett to test out that one, the bigtyp 120 VX is good, but the mounting bracket don't push the copper base tight enough onto the cpu, so i actually believe I could've gotten atleast 5 celcius less if it was tight enough... the zalman is supposed to be better. Try another cooler and PUSH THOSE VOLTS :cool: I don't believe 2550 mhz is the top... I resist to believe it :DQuote:
Originally Posted by LIKMARK
Don't get me wrong... I just have another idea of what safe volt is :)
My definition of safe voltages is about 1,6V on air.. Thats with the 9700LED.
I forced it up to 2625MHz for a validation once. That's with 1,5V on the NB and 1,6V on the SB.. Pretty sure I'm unlucky with this one.
http://valid.x86-secret.com/show_oc.php?id=209981
Tried with much looser timings on my ram too, nothing helps.
Kinda irritating, can't test my new ballistix for max oc.
http://www.zaimc.com/temp/2.7.jpg
At the moment ... 270fsb x 10multi x 4 HTT @ 1.6v (over volt option on)
ram is on 270mhz (540mhz), 3-3-2-5 1T @ 3v
nice oc on the ram!
Yeah, you're really unlucky, but I believe I'm more unlucky... now the AM2 3800+ x2 windsor setup here has gone capoof on me... Can't boot the machine, and I honestly don't know if it's the CPU or the GPU that has gone insane! Just have to send them both on RMA to komplett. And I haven't clocked either! The MSI K9N Neo-F is such a rotten clocker that anything above stock is a waste of time.Quote:
Originally Posted by LIKMARK
My deaf and blind grandmother could have told you that:)Quote:
Originally Posted by freakBYnature
Quote:
Originally Posted by savholic
hello welcome to XS!
I'm currently using the same mobo (brisbane 3600) and you have to mod the vdimm to get anything out of this mobo.
http://www.xtremesystems.org/forums/...ighlight=m2n-e
Quote:
Originally Posted by freakBYnature
The MSI K9N Neo-F is such a rotten clocker that anything above stock is a waste of time.
lol, but what if she was mute? Could she tell you then? :D It was an economic purchase for my kid, but I just didn't know HOW bad it was! :down:Quote:
Originally Posted by LIKMARK
http://www.directupload.net/images/0...p/ZzwNt4Iw.jpg
3300Mhz with 1.350V. CPU-Z shows 0,1V less then BIOS.
An old test with DFI Ultra-D on air .
http://img166.imageshack.us/my.php?image=2730vv9.jpg
What is this screenshot supposed to tell us?
the Opteron 170 has two cores, so you should run prime95 twice .. otherwise its for your grandmum ;)
~ 1.7v (in BIOS i suppose) for 2730Mhz ... what stepping is it? 0536GPMW? :D
Just saw your review of the mobo at your website btw. Nice site!Quote:
Originally Posted by freakBYnature
Never tried MSI's mobos, most possibly never will try them either...
My gfx is MSI, and I'm VERY happy with it, but thats another story...
WR :D
A64 X 2 4600+
socket AM2
Tdp: 89W
3251.54Mhz
It will give you up to 1.46vcore! Download the K9n Platinum Bios 1.7 and the manual so you can disable the devices that arnt used by your K9n Neo-F. I used the 1.6 and the 1.7bios for over a year with a 3200+Orleans@2.8ghz and a 5600+@3.1ghz 100%stable 24/7,with a lapped MiniTyphoon!:DQuote:
Originally Posted by LIKMARK
http://i168.photobucket.com/albums/u...llsierra/1.jpg
I believe the fking mobo DIED! I can't turn it on anymore in any case, don't know if it's the mobo or the crappy 7300GS :shrug: or anything else for that matter, will just have to send it in two parts a time to komplett :shakes:Quote:
Originally Posted by LIKMARK
:D
-x2 4800+ 65nm 1.4625V
-XMS2 6400C4 2GB 2.2V
-PX 8800GTS 320 MB
-M2N32-SLI Premium
http://www.snapdrive.net/files/27509...cpuz110750.gif
http://www.snapdrive.net/files/27509...i32m110750.gif
http://www.snapdrive.net/files/27509...soft110750.gif
http://www.snapdrive.net/files/27509...thos110750.gif
http://www.snapdrive.net/files/27509...itor140750.gif
http://www.snapdrive.net/files/27509...0/am140750.gif
http://www.snapdrive.net/files/27509...3d05150750.gif
Hello to all, I found this forum on the web, pretty good and interesting, I'm a Chilean, the third best score in SuperPi 2M on AM2 Socket here... for the moment! So im trying to get down to the first place, 1 second faster.
This is my Best OC
http://img442.imageshack.us/my.php?i...uperpi7wp3.jpg
and this happened when i Tried to get more out of the rams
http://img329.imageshack.us/my.php?i...superpipp5.jpg
I think I will and cant get another better timing in SuperPi
Thats why I came here to ask you guys...
My Computer is a
4800 Brisbane x2
With a DFI Infinity NF UltraII-m2
and some mushkin 2x1gb XP2-6400 (4-4-3-10)
My stable settings for SuperPi Where
- 248 FSB
- 12.5 Multiplier
- HT Link 993
- 1.6 Vcore
- 2.1 Vdimm
- 4-4-4-12 (23 TRC Bank Cylce Time) <--- Should I Lower this one too?!!?!?
- Mems workin @ 443x2 -> Somtin like 880 Mhz
I think thats all, a big hello for everyone and i hope I can easily integrate this community.
I invite you all to www.chilehardware.com a chilean overclocking and hardware website, pretty interesting with lots of reviews.
Bye
Cris
You should get an other Mainboard. I also owned the DFI Infinity and its not that good. My maximum was 3200Mhz with that board with 1.425V. I could even run prime95 for about one hour @ 3300Mhz with 1.350V with my new foxconn.
btw: the pics don't work.
The problem is I live in chile, the best OC mainboards are DFI, MSI and Asus...Quote:
Originally Posted by Peter Burg
Im going to the states probably in december, maybe somebody can recommend me something :P
hi guys , just got a crosshair and 5600+ F3 rev, first attempts http://img116.imageshack.us/img116/6...titled2gr0.jpg
http://img517.imageshack.us/img517/9...titled3os6.jpg
1.375Vcore , 2.175 vmem
yeah, i'm used DFI INFINITY NF570-M2/G with x2 5200+ before and i think INFINITY NF570-M2/G is the best of best for overclocking an AM2's cpu, that very easyQuote:
Originally Posted by PKdor
An update on my benchmarking and OC
got to first place in superpi2m
http://img209.imageshack.us/img209/5...rpi9sa3.th.jpg
Quote:
Originally Posted by _d_
He's got a DFI Infinity NF UltraII-m2, taht board has the "old" nF4 Chip and not the new 5 series like 570 and 590.
I could reach only 3200Mhz with the DFI, but 3300Mhz with the Foxconn, even 3400Mhz.
on air , ambient temp is 31.
http://img110.imageshack.us/img110/7545/3300io8.jpg
Decent clock I think:DQuote:
Originally Posted by ea6gka
I was just wondering... LDBHE 0601 is the best week of X2 3800+ Manchesters (?). Is the same true for the 4600+?
My Athlon 64 X2 4400+ Toledo Socket 939 stepping CCBIE 0610DPMW OC'ed 273x11 with vcore stock :D
http://img475.imageshack.us/img475/8...024x768ok8.jpg
my old cpu 4400+
2.9 on air http://home.no/smy/dataromme/sp%201m...%202900mhz.jpg
3.3 on phase http://valid.x86-secret.com/show_oc?id=117133
3.2 stabil
old time :)
My 4400+ on water, normal air temp (20-22C I believe).
I have a cvf file of this one at 345xMHz, but damn CPUZ released a new version a few days before so I couldn't validate it. On water, same air temp as the screenie.
I WILL test it more when I get some better cooling:D
running too on 1,30V
http://img382.imageshack.us/img382/1...benanntgt7.jpg
Here's my 6000+ on air 247 X 13 stock volts
is the HT link too high at 1235 ?, should the HT Link be lowered to 4X ? if so which one is it in BIOS
AMD Athlon 64 X2 6000+ AM2 3.0GHz
Asustek M2N32 AM2 nForce 590 SLI ATX 8 ch Audio 2xLan W/Less Lan
GeForce 8800GTS 640MB DDR3
2GB Crucial Ballistix Tracers DDR2 PC6400 (2 X 1GB)
Samsung SpinPoint T HD501LJ 500GB SATA-II 16MB Cache
Windows XP Home OEM
http://img.photobucket.com/albums/v1...og/24713-1.jpg
http://img.photobucket.com/albums/v1...g/super_pi.jpg
http://valid.x86-secret.com/show_oc.php?id=228003
Current Time = Mon Aug 13 16:46:37 2007 W. Europe Daylight Time
Computer Name = ZEUS
Number of Processors = 2
========== Operating System Information ==========
Microsoft Windows Vista (Build 6000)
========== Motherboard Information ==========
Motherboard Vendor: DFI
Motherboard Version: 1.0
Motherboard Model: DNF4DAGE
========== DirectX version Information ==========
DirectX 10.0 (6.0.6000.16386)
========== Driver Version Information ==========
Audio Driver Not reported
GART Driver 163.86 (6.0.6000.16386)
Graphics Driver Not reported
Ethernet Driver Not reported
IDE Driver Not reported
nTune 5.05.47
========== Processor, Bus, and Memory Speed Information ==========
CPU Speed = 3025.312
CPU Multiplier = 12.000
FSB Frequency = 252
Memory Frequency = 418.000
PCIE Frequency = 2500
tRas = 8
tRcd = 4
tRp = 2
tRc = 0
tWr = 0
tRrd = 0
tRwt = 0
tWtr = 0
tWrrd = 0
tWrwr = 0
tRdrd = 0
tRef = 0
========== GPU's Core and Memory Speed Information ==========
GPU Core Speed = 605
GPU Memory Speed = 902
========== System Voltage Information ==========
CPU Voltage = 1.550 v
Core Voltage = 1.600 v
AGP Voltage = 4294.967v
Aux Voltage = 4294.967v
Memory Voltage = 2.600 v
========== Processor and System's Temperature Information ==========
CPU Temperature = 26 C
Second CPU Temperature = Not Reported
System Temperature = 44 C
GPU 0 Temperature = 53 C
========== Memory SPD Information ==========
Memory Dimm 0 (0x50) Memory not present
Memory Dimm 1 (0x51) Memory not present
Memory Dimm 2 (0x52)
Memory type: DDR SDRAM
Error correction: NONE
Voltage interface level: SSTL (2.5V)
Data width: 64 bits
Number of physical banks: 2 (double sided)
Number of logical banks: 4
Number of row addresses: 13 13
Number of col addresses: 11 11
Bank density: 512 512 MB
Primary RAM Width: 8 8 bits
Error checking RAM Width: 0 0 bits
Module density: 1024 MB
Refresh rate: 7812.500 us
Self-refresh: Yes
Burst lengths supported: 2 4 8
CAS 2.5:
Cycle time (tCYC) = 6.000 ns fMax = 166.667 Mhz
Access time (tAC) = 0.700 ns fMax = 1428.571 MHz
--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------
Version EVEREST v2.20.405
Homepage http://www.lavalys.com/
Report Type Quick Report
Computer ZEUS
Generator Kay
Operating System Microsoft Windows Vista Home Edition 6.0.6000
Date 2007-08-13
Time 16:48
--------[ Overclock ]---------------------------------------------------------------------------------------------------
CPU Properties:
CPU Type DualCore AMD Athlon 64 X2
CPU Alias Toledo-512 S939
CPU Stepping JH-E6
CPUID CPU Name AMD Athlon(tm) 64 X2 Processor 4600+
CPUID Revision 00020F32h
CPU Speed:
CPU Clock 3024.13 MHz
CPU Multiplier 12.0x
CPU FSB 252.01 MHz (original: 200 MHz, overclock: 26%)
Memory Bus 201.61 MHz
CPU Cache:
L1 Code Cache 64 KB (Parity)
L1 Data Cache 64 KB (ECC)
L2 Cache 512 KB (On-Die, ECC, Full-Speed)
Motherboard Properties:
Motherboard ID 07/27/2005-NF4-SLI-INF-6A61FD51C-00
Motherboard Name DFI Inifinity NF4 SLI
Chipset Properties:
Motherboard Chipset nVIDIA nForce4, AMD Hammer
Memory Timings 2.5-4-2-8 (CL-RCD-RP-RAS)
Command Rate (CR) 1T
SPD Memory Modules:
DIMM3: OCZ OCZ4001024PF 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)
DIMM4: OCZ OCZ4001024PF 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)
BIOS Properties:
System BIOS Date 07/27/05
Video BIOS Date 04/13/07
Award BIOS Type Phoenix - Award WorkstationBIOS v6.00PG
Award BIOS Message (CK8LD727) EVALUATION ROM - NOT FOR SALE
DMI BIOS Version 6.00 PG
Motherboard (CK8LD727) EVALUATION ROM - NOT FOR SALE
Motherboard 07/27/2005-NF4-SLI-INF-6A61FD51C-00
Motherboard DMIMOBO: NF4-SLI-INF
Motherboard DMISYS:
PCI/AGP 10DE-0193: NVIDIA GeForce 8800 GTS [NoDB]
My Little OC with Aquagate mini R80; modding Black Ice GTS 120 XFlow Rad.
--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------
Version EVEREST v2.20.405
Homepage http://www.lavalys.com/
Report Type Quick Report
Computer ZEUS
Generator Kay
Operating System Microsoft Windows Vista Home Edition 6.0.6000
Date 2007-08-13
Time 16:48
--------[ Overclock ]---------------------------------------------------------------------------------------------------
CPU Properties:
CPU Type DualCore AMD Athlon 64 X2
CPU Alias Toledo-512 S939
CPU Stepping JH-E6
CPUID CPU Name AMD Athlon(tm) 64 X2 Processor 4600+
CPUID Revision 00020F32h
CPU Speed:
CPU Clock 3024.13 MHz
CPU Multiplier 12.0x
CPU FSB 252.01 MHz (original: 200 MHz, overclock: 26%)
Memory Bus 201.61 MHz
CPU Cache:
L1 Code Cache 64 KB (Parity)
L1 Data Cache 64 KB (ECC)
L2 Cache 512 KB (On-Die, ECC, Full-Speed)
Motherboard Properties:
Motherboard ID 07/27/2005-NF4-SLI-INF-6A61FD51C-00
Motherboard Name DFI Inifinity NF4 SLI
Chipset Properties:
Motherboard Chipset nVIDIA nForce4, AMD Hammer
Memory Timings 2.5-3-3-7 (CL-RCD-RP-RAS)
Command Rate (CR) 1T
SPD Memory Modules:
DIMM3: OCZ OCZ4001024PF 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)
DIMM4: OCZ OCZ4001024PF 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)
BIOS Properties:
System BIOS Date 07/27/05
Video BIOS Date 04/13/07
Award BIOS Type Phoenix - Award WorkstationBIOS v6.00PG
Award BIOS Message (CK8LD727) EVALUATION ROM - NOT FOR SALE
DMI BIOS Version 6.00 PG
Motherboard (CK8LD727) EVALUATION ROM - NOT FOR SALE
Motherboard 07/27/2005-NF4-SLI-INF-6A61FD51C-00
Motherboard DMIMOBO: NF4-SLI-INF
Motherboard DMISYS:
PCI/AGP 10DE-0193: NVIDIA GeForce 8800 GTS [NoDB]
Current Time = Mon Aug 13 16:46:37 2007 W. Europe Daylight Time
Computer Name = ZEUS
Number of Processors = 2
========== Operating System Information ==========
Microsoft Windows Vista (Build 6000)
========== Motherboard Information ==========
Motherboard Vendor: DFI
Motherboard Version: 1.0
Motherboard Model: DNF4DAGE
========== DirectX version Information ==========
DirectX 10.0 (6.0.6000.16386)
========== Driver Version Information ==========
Audio Driver Not reported
GART Driver 163.86 (6.0.6000.16386)
Graphics Driver Not reported
Ethernet Driver Not reported
IDE Driver Not reported
nTune 5.05.47
========== Processor, Bus, and Memory Speed Information ==========
CPU Speed = 3025.312
CPU Multiplier = 12.000
FSB Frequency = 252
Memory Frequency = 418.000
PCIE Frequency = 2500
tRas = 7
tRcd = 3
tRp = 3
tRc = 0
tWr = 0
tRrd = 0
tRwt = 0
tWtr = 0
tWrrd = 0
tWrwr = 0
tRdrd = 0
tRef = 0
========== GPU's Core and Memory Speed Information ==========
GPU Core Speed = 620
GPU Memory Speed = 918
========== System Voltage Information ==========
CPU Voltage = 1.550 v
Core Voltage = 1.600 v
AGP Voltage = 4294.967v
========== Processor and System's Temperature Information ==========
CPU Temperature = 26 C
Second CPU Temperature = Not Reported
System Temperature = 44 C
GPU 0 Temperature = 53 C
AGP Voltage = 4294.967v
:D :rofl: :shocked: :clap: :ROTF: :confused: :p:
:( Well i am not good with taking a shot of cpu-z or everest, maybeQuote:
Originally Posted by knopflerbruce
if you can give me a hint on how to do that i will post u some backup pics:cool:
OCCTQuote:
My Brisbane
AMD BE2350+ & HR01 (Fan 2700 rpm) (Vcore 1.475)
Asus M2R32-MVP (BIOS:0906)
Kingston D9GMH 1024*2 (Vmem 2.4v)
XFX 7900GS (@630/850)
HDD ST3120814A (7200.9)
Enermax Liberty 400w
http://www.upfile.us/file/jpg/occt.jpg
Orthos
http://www.upfile.us/file/jpg/Orthos_3Hr.jpg
SuperPi 1M & 32M (1 Cores)
http://www.upfile.us/file/jpg/SuperPi1M_32M.jpg
SuperPi 32M (2Cores) 1/2
http://www.upfile.us/file/jpg/SuperPi_32M_01.jpg
SuperPi 32M (2Cores) Finish
http://www.upfile.us/file/jpg/SuperPi_32M_02.jpg
FritzChess
http://www.upfile.us/file/jpg/FritzChess.jpg
It's quite ok ... :)
You have a key on your keyboard that reads "print scrn" or something similar... it will take a screenshot of all that is visible on-screen at the present time... use the key, and then paste in mspaint or some other software that handles images :) voila, you have a screenshot :)Quote:
Originally Posted by Shocker003
here's a cpuz validation link of my work in progress ;) trying to hit max HTT on am2 without no stability issue ;)
http://valid.x86-secret.com/show_oc.php?id=241553
my try on highest htt
http://valid.x86-secret.com/show_oc.php?id=241553
Tested the same thing here a couple of days ago..
412,7 HTT link
http://valid.x86-secret.com/show_oc.php?id=240940
Rock stable @HT link votlage 1,5v, nb-core 1,5v, sb pll 1,6v, and sb core 1,65v
The board booted at 450 HTT set in bios, but 412 HTT was max anyways, anything above that, and clockgen didn't work! I'll upload screenies of it later..
http://img517.imageshack.us/img517/4...t450ez1.th.jpg
Edit: Picture of 450htt, booted in at it, but the clock generator apparantly could not handle it...
Highest ht I've tested was at 1500MHz..
Anyone know how my 4000+ CAALG 0705TPAW should oc? has anyone with this stepping hit 3GHz?
I have a few programs that worked well for me they are #ClockGen# CrystalCPUID# these all work with the AMD AM2 processors the best one to use is CrystalCPUID e-mail me if you want any more
Systool is a very handy application also.
X2 4200+ LCB9E 0719WPMW
Air cooled (XP-90), IHS still on
245x11=2695 mhz
System---DFI nF4 Ultra-D
Bios 704-2bta
OS---Windows XP SP2
VID= 1.325 v
VID SPECIAL= 110%
CHIPSET= 1.5 v
LDT= 1.3 v
LDT= 4 X
vdimm = 2.7 v
CPC = Enabled 1T
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 12
Row Refresh Cycle Time(Trfc) = 16
Row to Row Delay(Trrd) = 3
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3120
Write CAS Latency(Twcl) = not in this bios
DRAM Bank Interleave = Enabled
Skew = Auto
Skew Value = 0
DRAM Drive Strength = Weak 4
DRAM Data Drive Strength = Level 3
DDRAM Response Time= Normal
Max Async Latency = 8 ns
Read Preamble Time = 6 ns
Idle Cycle Limit = 256 cycles
Dynamic Counter = Disabled
R/W Queue Bypass = 16X
Bypass Max = 4X
32 byte Granularity = Disabled
http://img230.imageshack.us/img230/5120/occtft7.th.jpg
http://img230.imageshack.us/img230/8749/cpuzkm2.th.jpg
When I get time I'll run Orthos 24 hrs & post it here. - Scott
my rig..
G1 step. 5000+ Brisbane on polished HyperTX with AS5..
soon to remove heatspreader, see if that is going to make any improvement..
this res. is on my old Twinx 6400C4, rev. 2.1 kit, with ProMOS chips.
3000MHz& 850MHz@CL4-4-4-12-2T
http://valid.x86-secret.com/show_oc.php?id=255635
http://img84.imageshack.us/img84/505...122tem3.th.jpg
3100MHz& 888MHz@CL4-4-4-12-2T
http://valid.x86-secret.com/show_oc.php?id=255639
http://img84.imageshack.us/img84/837...122tbl4.th.jpg
3170MHz& 900MHz@CL4-4-4-12-2T
http://valid.x86-secret.com/show_oc.php?id=255840
http://img85.imageshack.us/img85/188...xzaslb3.th.jpg
these are max stable for SPi and 3D Mark, also suicide shot is possible on 3200MHz+ but hardly is any important..
will try in a couple of days what this cpu can do with these new dominators and will put a Sempron 2800+ to see what's what..:up:
maybe u should try it.. but plz dont exceed the high temperatureQuote:
Originally Posted by Inteleron
here is my X2 4000+
http://valid.x86-secret.com/show_oc.php?id=261171
@ 1,47v
i need a new board ^^
A friend of mine built a computer few days a go. Got chance to play with them :D
Processor : AMD Athlon 4000+ AM2 Brisbane
Mobo : Biostar TA690G
RAM : 2x1G KVR
VGA : Winfast 7300GT Extreme
Cooler : Thermaltake Mini Typhoon
Max suicide shot @ 1.5 V : 3381 MHz on TForce 6100 AM2 : http://valid.x86-secret.com/show_oc.php?id=268534
Another Brisbane 4000+ AM2...
Batch is CAASG ....... (forgot the last part)
Max stable on stock VCore about 2.8 GHz.
3 GHz is stable with additional voltage.
Max clock @ 1.53 V with phase change : 3440 MHz.
http://valid.x86-secret.com/show_oc.php?id=270219
DFI LP Ultra-SLI
4200+ X2 @250
G.Skill HZ F1 DDR500 3-4-4-8
One question i have is if i can boot into windows and run normal apps at 3.0Ghz (273x11) how do i make the computer stable at that number to run SP2004? i have went up to 1.55 volts but sooner or later it fails.
The answer may lie in the sub-timings of your RAM, Ultra-D is very sweet setting this with, I have one of my own :) Find out your optimal MAL, RP, DRIVE STRENGTH and DATA DRIVE STRENGTH. May be set somewhat weaker all of them, and may as a side-effect cause stability ;)Quote:
Originally Posted by on1yalad
Try one at a time, drive strength and data drive strength is important. But also setting TREF is very important, rather then leaving it at auto. Let it say auto and find out what refresh rate it's at from everest or some other software that reads it. Then check out what each TREF in bios means, and set it at the correct microsecond (us) refresh rate. This is a difficult setting on DFI boards, but nonetheless very important for getting the stability a and performance you want.
What can you say but HOLY TOLEDO! :rofl: :rofl: :rofl:Quote:
Originally Posted by Blademaster
Impressive clocks, I never got mine above 2800 on air and that thing would fry an egg for sure.
Hi Xtreme friends,
Chek my toledo:
Core: LCBQE
stepping: SPMW
week: 0721
and....my WR :D
http://www.ripping.org/database.php?cpuid=414
http://valid.x86-secret.com/show_oc.php?id=270840
max stable clock...
http://img251.imageshack.us/img251/4...2600mhzmj7.jpg
at 2670mhz it runs prime for 4 hours, at 2700mhz for 18 minutes, at 2800mhz less than a minute... all with stock vcore (1.25 - 1.30v)
ADO4000IAA5D0
NAARG0737GPMW
Boost up the vcore to 1.375~1.4v and it does 2.7 GHz easy :)Quote:
Originally Posted by Spectrobozo
It may be that the memcontroller needs just a little bit more voltage :)
2.7ghz or more?!Quote:
Originally Posted by freakBYnature
the problem is that my motherboard (asrock alivenf6g-dvi) doesn't let me to increase the vcore, only decrease :down:
there is a little modification to increase, but that will just make useless the cool n quite to (cool n quit will run with 1.3v or more), and since I let this PC downloading files for most of the time cool n quite is a good.
Look this Bios mod for your mb, http://www.box.net/shared/6bc15dlctcQuote:
Originally Posted by Spectrobozo
There is a big list with modded bios in this thread.
http://forums.mydigitallife.info/sho...p?t=3&page=312
cool & quiet aint useful when overclocking anyway, it can (and in most cases will) make your system unstable. So if you can mod it, or take up on the advice and test out an unlocked modded bios I would make the suggestion, just do it. These cpu's can handle 24/7 up to 1.45~1.5v for years in most cases, depending on your cooling :) Clock it till it rocks! ;)Quote:
Originally Posted by Spectrobozo
And yeah... 2.7 GHz is in most cases easy with these cpu's. I have still not found one that doesent do that.
Only valid at this time. Vcore limit to 1.55V ( mobo limit ), air cooling, ihs out :up:
http://valid.x86-secret.com/show_oc.php?id=273613
Martin
AMD X2 4000+
ADO4000 IAA5DD
CAAIG 0705 XPMW
Z134752B70093
2,812 GHz mit Standart vCore (1,2750 im Bios)
http://img252.imageshack.us/img252/6308/oc3wa6.jpg
my Toledo x2 4200 2.2 @ 2.4ghz is currently running around 39C in Bios
CoreTemp shows 24C Core 0 and 29C Core 2
which one to trust?
i know this thing can get up to 2.7 ghz
i have it on a dfi lanparty sli-d mobo with an arctic cooler 64 pro ... with AS5
I think Bios is correct
4600+ X2 manchester 939
Asus A8N-SLI 1014 bios
4x512 centon ddr400
EVGA 8800GT o'cd 730/1000
thermalright xp-90/92mm fan HSF
xion 600watt powereal PSU
http://<a href="http://img152.images...kyetlr6.th.png[/IMG]
I dont know how some are getting 3 ghz stable. I couldnt even boot at 2.99 and have only now been able to run prime 95 stable for 1.5 hours.
I didnt tweek ram at all... only set it to 333mhz.
How do I go about getting higher speeds?
How am I doing? : D
http://img.photobucket.com/albums/v1...cpuzcegras.png
I believe I can go higher. TRUE w/ S-Flex F, I load at just under 60 on Orthos.
I might get 2.8 on this.
"LCB9E 0633 BPMW" - not sure if it's BP or CD "revision"
I can get 2750MHz stable on my x2 3800+ and 2800 seems ok, for general usuage but my temperatures are not good - getting new h/s/f soon - probably the best I can find.
btw, cegras, thats a good clock is it on stock vcore? if it is then you should be onto a winner. Some that can do 2.7ghz on stock can do 3000 on 1.5v or so from what I have read (toledo x2s) and this one has done 3006 before on 1.55v for benchmarking and it didnt lock up at all, it just got too toasty.
cpu-z verification upto 3217MHz - ac cooling freezer pro w/ 80mm fan - and super pi at ~3050 - 1MB ~ 29s
http://valid.x86-secret.com/show_oc?id=202127
SiSoftware Sandra
Benchmark Results
Dhrystone ALU : 16109MIPS
Whetstone iSSE3 : 16568MFLOPS
Results Interpretation : Higher index values are better.
Performance vs. Speed
Dhrystone ALU : 5.86MIPS/MHz
Whetstone iSSE3 : 6.02MFLOPS/MHz
Results Interpretation : Higher index values are better.
Performance vs. Power
Processor(s) Power : 116.35W
Dhrystone ALU : 138.45MIPS/W
Whetstone iSSE3 : 142.40MFLOPS/W
Results Interpretation : Higher index values are better.
Performance Test Status
Run ID : 1x AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (Dual-Core, 2.75GHz, 2x 512kB L2)
Platform Compliance : Win32 x86
NUMA Support : No
SMP (Multi-Processor) Benchmark : No
Total Test Threads : 2
Multi-Core Test : Yes
Cores per Processor : 2
SMT (Multi-Threaded) Benchmark : No
Processor Affinity : P0C0T0 P0C1T0
System Timer : 2.75GHz
Number of Runs : 64000 / 640
Processor
Model : 1x AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Speed : 2.75GHz
Model Number : 3800
Cores per Processor : 2 Unit(s)
Type : Dual-Core
L2 On-board Cache : 2x 512kB, ECC, Synchronous, Write-Back, 16-way, 64 byte line size
Features
SSE Technology : Yes
SSE2 Technology : Yes
SSE3 Technology : Yes
Supplemental SSE3 Technology : No
SSE4.1 Technology : No
SSE4.2 Technology : No
EMMX - Extended MMX Technology : Yes
SSE4A Technology : No
HTT - Hyper-Threading Technology : No
the above si soft sandra arithmetic benchmark was at 2806MHz - it says 2750 for a reason - because I boot the PC up at 2750 (BIOS) and set it to 2800 (Clockgen) as my mobo (EPOX 9nda) doesnt like 1t RAM CPC above 276 htt.
http://aycu29.webshots.com/image/395...1329487_rs.jpg
You do know I bought the Aerocool ExtremeEngine 3T, and with the Zalman 9700LED I got 2.8 GHz @ 1.425V instead of 2.75GHz... the temps are not even getting to 40c orthos load, and my mem is really weak when run on a divider, but I got it to DDR466 when set @ 3-4-4-10 1T... and I do know my timings aint the best, but it's UCCC for crying out loud... it's not that bad. I get DDR500 3-4-4-8 1T, but only when run 1:1 with the CPU.Quote:
Originally Posted by ben rogers
I told you that I believe you can clock your cpu more if you get a better cooler, but I also got 50mhz more without the biggest hazzle on mine only by swapping the case. The one I've mentioned was really sweet I tell you. Lots of headroom for clocking with a cool, noisefree case.
I HATE NOISE :mad:
BUT LOVE CLOCKING! :rofl:
http://valid.x86-secret.com/show_oc.php?id=300962
Just started pushing this 6400.
After work update:
http://i31.photobucket.com/albums/c3...Mcalc28967.jpg
my AMD X2 4000+ EE @ 3.44Ghz in aircooling :)
http://valid.x86-secret.com/show_oc.php?id=299719
Stable @2.9ghz vcore stock
http://images3.hiboox.com/vignettes/0308/huecfz6a.jpg
this is my x2 3800+ OC 2 2.5ghz vcore 1.400
my board is MSI k9n NEO v3
i can't go further to 2.6ghz up because my vcore is luck
http://s68.photobucket.com/albums/i1...nt=rapOCCT.jpg