Printable View
How would I find out which BP PCB I have on my G.Skill LA?Quote:
BrainPower PCBs tend to overclock better than the standard or enchanced JEDEC PCBs. Why, I don't know. But they are a lot cheaper to produce than JEDEC PCBs thats for sure (its also rumoured that the BP808 do better than the BP815 PCBs...).
Look at the markings on the end of the module. You will see "B6U808" or similar if it's Brainpower.Quote:
Originally Posted by DragonOrta
ok, Thanks Andy.
Punisher i got my ram to 301MHz http://www.xtremesystems.org/forums/...101#post954101
So you can update the Kingmax Hardcore series section in your post. At least 1 product from them deservs to be in this thread. To bad i didnt find your thread sooner then i would knew that OCZ VX is UTT an would not bout them for my Dothan rig. Exelent thread by theway :up:
I will... sorry but I am a bit busy! :DQuote:
Originally Posted by railer
List updated:
Addings (A) or editings (E):
GeIL ONE (A)
GeIL ONE BH (A)
G.Skill ZX (A)
G.Skill FR (A)
G.Skill FC (A)
OCZ PC4200 (A)
OCZ PC4800 PE (A)
OCZ PC4800\PC5000 (E)
KingMax Hardcore BGA --> Hynix B (A)
Several other not listed editings. Find them on the List :p:.
If I forgot some addings or editings or if you want to report some "not listed" memories just tell me! ;)
Bye! :D
how do I find out if my corsair 3200xl's are v1.1 or v1.2 ? Is there any difference between them in oc and/or voltage needs?
you can read it from the sticker on the heatspreaders.
v1.2 is generally better for oc-ing since it utilizes brainpower pcb which maximizes the performance of tccd ic's.
:stick: :kittenhat :hump:
I was wondering if anyone knows what chips are in my ram. I just got them back from RMA. I had rev 1.1 before and they wouldnt get past 220 bus :( so I had to rma them. The new set are the following:
Corsair PC4000 memory.
CMX512-4000PT
XMS4000v3.4
0526123-1
go to corsair supports forums and post that info in 'ic inquiry thread'.
so is this the Mushkin "Promo" Build w/ BH-5?
http://www.newegg.com/Product/Produc...82E16820146353
Thats tccd/tcc5.Quote:
Originally Posted by PanaBob
What's the difference between UTT (OCZ VX) and New BH-5 (Mushkin Redline). I always thought the two rams were basically identical
Same here :slap: :confused:Quote:
Originally Posted by dmo580
:D AFAIK Winbond UTT can be either new BH-5 or new CH-5 based - so the addition "BH-5" classifies it definately.
:toast:
This RAM is definitely BH-5 right? I just want to make sure before I buy it.
First stick is:
KHX3500/512R
9905200-011.A00
1199838 - 2.5v
Second is:
KHX3500/512
9905200-011.A00
1070861 - 2.5v
Redline and VX are both UTT-CH on BP PCB so they are basically identical. There are also UTT-BH chips which are used in RAM such as OCZ Gold 3200, OCZ Gold 3500, and GSkill GHQuote:
Originally Posted by dmo580
Quote:
Originally Posted by HiJon89
yes ! Both are BH-5. R ( KHX3500/512R ) stand for Retail :)
Great, thanks :toast:Quote:
Originally Posted by Zanr Zij
http://www.newegg.com/Product/Produc...2E16820144102R I think it's CH-6 or maby BH-5???? ( might buy it)
What's with the new Mushkin Xtreme Performance DDR sticks? I'm guessing those are TCCDs? Redline 3200 has been removed on their site... weird. Go check their site out =)
whats the max voltage for Corsair XMS PC3200XL Pro Rev. 1.2??
Now they are running on 2.8 @ 230FSB 2-3-3-5-1T.
I just got a responce on the corsair IC thread about my mem. just wanted to let everyone know. The Ramguy lists my mem mods as TCCD :) talk about a great RMA lol I rmaed hynix and got back tccd :)
Corsair PC4000 memory.
CMX512-4000PT
XMS4000v3.4
0526123-1
He posted a ton of corsair mem listings. if anyone is interested.
http://www.houseofhelp.com/v2/showth...695#post205695
Quote:
Originally Posted by BB mods's
BH-5 Sure :)
max = unlimited :D...(j/k) . It can eat 3.2-3.3v with very good active cooling :)... Push it higher because of TCCD...Quote:
Originally Posted by qujck
Anyone knows how well this: DDR DRAM PC3200 / 512MB PC3200 DDR, CL2 (GeIL Ultra, GL5123200UP), performs? And is it wise 2 use it with Dothan @ P4C800E-Deluxe?
please update the mushkin redline - they use utt ch5 and not bh5 as you mention :toast:
Quote:
Originally Posted by cupra
plzz more detail :D . Thx...
Putting more than 3.1v into tccd is asking for trouble.Quote:
Originally Posted by Zanr Zij
Quote:
Originally Posted by jumanji969
more info plzz ! I don't thinks so... May be it's right with G.Skill but not with Corsair TCCD hehe... esp C2PT and XLPT...
i doesn't matter whether its gskill or corsair but rather what week are used tccd's.
i remember there were some weeks that liked 3.0-3.1v but anything over that isn't advisable, especially for longterm usage.
week : almost are 443. 2 pair of XL are 503. My C2PT v4.1 IC are 449... How long about "longterm" ? I used in 4-5 month :) and no prob...Anyway maybe my rams are special because of full mod Ram HS ( copper + High performance Thermal Paste + Active Cooling ) :D. With stock HS, put it 3.1v max ;)
you've run them @3.3v for 4-5 months? wow...
i think weeks 43x were the ones which liked more voltage, i'm not sure though. newer ones like less.
437 and 440 not like more than 3.1. My 449 like max 3.3v :D... Daily 3.2v :)
okay, 449's you say.
and what about newer ones, 5xx?
I have not mod HS so I'll try :D
Hey guys ! Are all Kingston HyperX PC3200 ( not K2 , A2 ... ) BH5 chip ? I found 2x512Mbs HyperX PC3200 and wanna make sure before buying them
Yes they are... it has been answered before. But yes thank god they are, I have got a Kit they perform wonderfullyQuote:
Originally Posted by xs64
hey guys i just got corsair twinx1024-3200c2 5.2
on the list it doesnt mention 5.2, does anyone know what chips these use.
http://www.xtremesystems.org/forums/...ad.php?t=72542
promos most likely.
try testing them a bit, if they max out around 220-230 thats it.
Help us to insert it then! Post the CPU-Z "SPD" screenshot and test them a bit with different timings and report your results! :DQuote:
Originally Posted by calcal
Punisher!, you can add Corsair XMS3200C2PT rev 1.3 to 1.7 Winbond UTT.
Rev. 1.3 to 1.7? You mean 1.3, 1.4, 1.5, 1.6 & 1.7 or 1.3 & 1.7, because for example 1.5 have Winbond New BH5 (UTT BH5)?Quote:
Originally Posted by Micutzu
Do you have some screenshots?
actually xms c2 v1.4 has been reported using mosel vitelic multiple times by ramguy @corsair support forums.
That's why I always ask for screenshots ;).Quote:
Originally Posted by high5
I was refering to all of the revisions from 1.3 to 1.7, and i said that are UTT, that means either BH UTT or CH UTT (i don't have detailed info on exactly wich revision uses BH and wich CH). This screenshot is taken with a pair of v1.4 sticks at 3.4V; i've also popped the hs' off them and they were Winbonds allright.
http://img368.imageshack.us/img368/9134/340v0qr.th.jpg
I've personally seen only v1.4, v1.5 and v1.7, and they were all Winbond chips; the rest is based on 2nd hand info. Also, it seems all the 3200C2PT 1.X and 2.X are Winbond, 3.X is Infineon, 4.X is Samsung and 5.1 & 6.1 is MosEl; Corsair is using different numbers for every chip manufacturer.
Yeah, this is mostly true. Anyway in the screenshots there isn't the "SPD" window.Quote:
Originally Posted by Micutzu
Does this look like ch5? I think they have changed the chips?Quote:
Originally Posted by Punisher!
http://www.xtremesystems.org/forums/...id=36252&stc=1
very nice. :)Quote:
Originally Posted by Micutzu
just to make sure, those v1.4's of yours are xms 3200c2?
yes, it would be logical thal all c2 v1.x's are winbond based, however, all (i think) c2 v1.4 inquiries have been linked to mosel vitelic by ramguy. maybe you should post your info there and see whats the official response, just out of curiosity.
http://www.mushkin.com/doc/products/...ail.asp?ID=239
Anyone know anything about this memory? It appears that Mushkin has just released it. I curious as what chips this memory would have. I might also mention that I also purchased 2x1GB set of it.
kronos :D :woot:
Directely from Mushkin!!!Quote:
Originally Posted by kronos
--> 2GB XP3200 3-3-3-8 Dual Kit (2x1GB) 250mhz 3-4-4-8 (infineon)
1GB XP3200 Dual Pack 2-2-2 (2x512MB) tccd/tcc5
1GB XP4400 Dual Pack 2.5-4-4 (2x512MB) tccd
1GB REDLINE 3200/3500/4000 (2x512mb) UTT/ch
Quote:
Originally Posted by Punisher!
The memory I'm asking about is XP4000 with timings of 3,4,3,8 at 500Mhz. :fact:
highlander :nono: :D
here are my results..you guys will be shockedQuote:
Originally Posted by Punisher!
Quote:
Originally Posted by high5
you are correct they are ProMoss -5 IC's according to ramguy @ corsair forums
very nice :up:
i have to admit i never seen promos based ram going so high... pi 32m stable?
btw, do you have digital camera?
Same Infineon overclocked.Quote:
Originally Posted by kronos
If you could add even the "SPD" CPU-Z windows it would be better.Quote:
Originally Posted by calcal
I have a digital camera, and ill test 32m later when i get back from schoolQuote:
Originally Posted by high5
ill do it after i come back from schoolQuote:
Originally Posted by Punisher!
Can anyone confirm this isn't Winbond ch5 like it should be? :confused:Quote:
Originally Posted by Comp-Freak
can't tell from a side shotQuote:
Originally Posted by Comp-Freak
also, a note about ddr1 >pc3200 crucial ram..
on the end of the part number, there is a period, then a few letters and numbers.
example:
BL6464Z402.16TG
CT12864Z40B.M16FD or .16TD2
the first number (16) is the number of chips on the pcb. most often, 4 and 8 are single sided while 16 is always double.
the letter after the first number, T or F. T stands for TSOP, F stands for FBGA
the next letter, there's 3 options, it denotes the chip die revision, C, D and G, for 5b C, 5b D and 5b G
the last number, if there, i haven't quite figured out yet. i'm guessing a different pcb revision or something.
that out of the way, i have also discovered that 512mb ballistix can come in 5b D, single sided:
http://www.hardforum.com/showthread.php?t=946804
It do not really look like Winbonds, i think it's something other!
Here are Kingstons with Winbond BH5 :
http://img.techpowerup.org/050829/kingstonbh5.jpg
guys i just ordered the patriot 1gig kit the 3200xblk. anyone order these latley? im praying to god they still ship with the tccd and bp pcb like the used too.... so if anyone nas ordered these recently or know someone who has can you tell me if they still have the tccd chips? i realy should cancel my order and order something i know has tccd and the bp pcb... i just have a bad feeling that these xbl's arent sporting tccd anymore....
thx perc,
According to Duonger (Mushkin employee), they're not Infineon chips. See the 2x1GB thread for the post.Quote:
Originally Posted by Punisher!
Ok here are my results!
Hey high5 what do u want me to take a picture of ? my ram?
Today i have 1 kitQuote:
Originally Posted by Truckchase!
i post results!
Infineon or Micron now?
And what did he tell they are?Quote:
Originally Posted by Truckchase!
yeah, just like the ones comp-freak & gravedigga posted recently.Quote:
Originally Posted by calcal
btw comp-freak, that ram of yours is certainly not winbond based.
Thnx GravediggA and high5. I knew winbond has the 2 metal "lines" on de side. I'm curious what chips they have, but I think I'm going to get some other ram and sell these.
punisher is that the screen you wanted to see?Quote:
Originally Posted by Punisher!
here are the picturesQuote:
Originally Posted by high5
Hi,I did a sandra lite test on my system and after 89 pages, one of the tips was i should be using eec/parity or registered/buffered for large memory,i have 2x512 of buffalo pc 3200u 2.5-3-3-8.16x(32mx8) winbond w83627(t) hf isa(4Q1999)
bank 0: 256mb ddr-sdram 2.5-3-2-7 2cmd
" "" ""
same for all four banks but only using two.
can anyone tell me why it is telling me this as i car'nt get any answers out of it?
Does anyone know what chips does it uses ?
Ultra Extreme memory
I`ve heard that is bh-5 :rolleyes: ..... If somebody knows please post .
The old Ultras used BH5, but the new ones..hmm.. don't think so! Timings 2.0-3-2-x .. that could be alot of ICs! Maybe it's UTT CH5.
It is quite strange that i only see those on Tigerdirect ..... even if it is UTT the price is not bad .Quote:
Originally Posted by GravediggA
How Do I Remove These Heatsinks???????
like all the other normal heatsinks.... pop the clips off, then EXTREMELY GENTLY, pull the spreaders off.Quote:
Originally Posted by calcal
how do i take the clips off?
use some creativity... ;) little bit of thinking goes a long way.Quote:
Originally Posted by calcal
PC4000 REDLINE XP4000 DDR500 (2-2-2-5-1T @~3,3V) --chip--> Winbond New BH-5 ~ Brainpower PCB ... thats wrong ... they are utt ch-5 !!
Someone Tell Me How To Take These Heatsinks Off Or Link The Instructions
They Dont Pop Off
My pqi TURBO DDR550 is using Hynix D5 + Brainpower 815 and it has a pmi sticker on it.
http://www.geocities.com/a_andlcs/MEM/pqi_DDR550_01.JPG
http://www.geocities.com/a_andlcs/MEM/pqi_DDR550_02.JPG
This is a nice report, thanks a lot! :DQuote:
Originally Posted by andlcs
(I write all the perfect reports on my .txt and after ~5 I update the list).
I know as I have written few posts ago ("directely from Mushkin"), I will correct soon. ;)Quote:
Originally Posted by Eloxxd
You must remove the metal clips. To do so, put a screwdriver or something underneath it. When done removing the clips, gently pull the heatspreaders off. Between the heatspreaders and the chips there's thermal tape.Quote:
Originally Posted by calcal
thanks comp freak, the first part worked but the second part didnt. I cant pull the heat spreaders off, its too tight :(Quote:
Originally Posted by Comp-Freak
It's a start ;) You must lift the heatspreaders on the same side the contacs for the ram slot are. On the other side, the 2 spreaders are hooked into each other.Quote:
Originally Posted by calcal
Just wanted to post that i bought a pair of Patriot 2x512 pc3200XBLK and i recieved them today. they have the BP 815U pcb (Thats RED pcb :) ) and the tccd 522 chips. i havent run them yet but suspect they will fair just fine...
peace perc,
Yeah, they will man! Report us your progress! :DQuote:
Originally Posted by Perc
so far these new patriot tccd 522 are acting more like my 256 tccd sticks then my older crosair 4400 512 tccd sticks... these 512's here will let me run 270/280htt at 2.7v and 2.5-3-3-8 instead of the 2.5-4-4-8@ 2.8v i had to use with my 4400 crosair tccd 440 memorys. im going to see if they run 300htt or not at these timmings? im sure they do but you never know...
peace perc,
I think PQI evolved out of what used to be PMI, didn't they?Quote:
Originally Posted by andlcs
Not bad man! Also the clock of your Dual Core is awesome! Let's see if your memory can do more! :DQuote:
Originally Posted by Perc
over a year ago pqi bought pmi, so basically yes.Quote:
Originally Posted by serlv
lol yeah i cant complain about this dual core so far with these patriot 512 sticks im at 280htt 2.7v 2.5-3-3- 1:1 ofcourse... with my other crosair 4400 tccd i was running this core at 300htt just havent tried these new memory at 300 yet im sure they will do it np. heres a screen shot of 300htt using my crosair tccd...Quote:
Originally Posted by Punisher!
*edit* heres a screen shot of the new patriot doing 300htt 2.5-3-3-X using only 2.7v. compare these to my crosair at 300htt where i had to use 2.5-4-4-X using 2.8v id say these new patriots deff oc nice with even tighter timmings then my old tccd 440 crosair...
peace perc,
Hello
Somebody know what chips have OCZ EL PC2700 rev. 3.2 256MB sticks ??
SPD timings 5-2-2-2
Regards
Peter
:banana:Quote:
Originally Posted by Perc
What about some benchies? :p: :toast:
Quote:
Originally Posted by Punisher!
i can post a few i supose. i just never see anything special about my mem scores so i never post them...
peace perc,
Just got my OCZ4001024WV3DC-K BH-5 goodness new stick's i think ill break them in right with some high fsb lovin :)
hi!
i've got a question:
i'm trying to to buy old bh-5/6 and i got a message where it was written that geil ultra pc3500 p/n MAG16UL6464D2TG4A-KT is winbond. but i dont have any info about the chips.
what do you guys think, could this be winbond bh?
ps if anybody sells 2x512 winbond bh5/6 pm or e-mail me please.
Black PCB no. Green PCB ,maybe.Quote:
Originally Posted by i found nemo
oh, on another post here on xs it said that it had utt chips :(