It must be, none of the L2 can get that high FSB !
Printable View
It must be, none of the L2 can get that high FSB !
L2 are pretty neat ^^Quote:
Originally Posted by Prodigys
128%?:D
http://users.telenet.be/kuan/4.1.JPG
Quote:
Originally Posted by BeardyMan
Okay, thats a nice score, but you get very rarely a good L2 that can take higher FSB then 410 or so.
90% are stuck under 400FSB, 8% between 400-410, and only 2% go higher then 410- (~)
That is if you ask me...
My 6300 L2 seems ok think it sticks around here
http://valid.x86-secret.com/show_oc.php?id=237348
e2140 Vapochilled. 129%
it's far from orthos stable. that goes around 3600Mhz.
at 459fsb it drops complete dead. no matter what voltage i feed it.
pretty good for a $75 cpu.
Ε4300 @ h2o 3682Mhz ~ 106 % http://valid.x86-secret.com/show_oc.php?id=236445
alltho i need new PSU and coolers on my striker extream heat problems :(
Hello, I´m the new in the club :D
Neuer AMD Athlon64 3000+ Venice World Record !!!!!!
3657,87 MHz @ 9x406,43 @ 1,872 Volt
Sorry, cpulloverclock :D
First 100% OC, Celeron 420 400X9 1,55 V Scythe Infinity Cooled
http://valid.x86-secret.com/show_oc.php?id=232550
SuperPi ran fine, but i couldn't boot higher, and i found no Clockgen or SetFSB that worked ( MSI P35 NEO2-FR, same as P35 platinum) :'(
I got my new Freezer7 heatsink and I cranked 'er up to she what she'll do. I was able to achieve 533FSB x 7 with my E6300 and un-modded P5B vanilla motherboard. I ran the usual tests and temperatures were acceptable and the system was rock solid. I reduced the ram timings to 4-5-4-4-12 with memset, 533MHz is pretty good for DDR2-533 ram @ 2.1v, but I guess it is 533 ram after all :) I tried 535FSB but got blue screen in Windows during testing with the tighter timings. At 540FSB she would boot but flounder.
I know many have higher o/c's and are more stable, ect, but I am pretty happy considering this is a semi-cheapo system with the lowest cost parts throughout. My E6300 is an early one from July '06. It o/c smooth as butter and did 3670MHz with only 1.4v. I cranked the vCore to 1.5 and higher, as temps were not an issue with the new Freezer7 on full tilt. I know this cpu is a golden one and would go much faster with a better mb & cooling.
-----------------------------
Asus P5B / E6300 @ 533x7=3730MHz / Crucial 10th Anniv. DDR2-533 @1066MHz @ 2.1v / AC Freezer7 heatsink / Ati X800XL / Seagate 250g/320g / Hec AcePower 420w / SB Audigy SE / CM Elite case /w 2x 120mm fans
http://i32.photobucket.com/albums/d2.../ccpuz.php.png
E2140 (M0 stepping, Q725A)
scythe samurai-z-92mm dc koala
Abit IP35-E
2x512mb Fatbodies
http://valid.x86-secret.com/show_oc.php?id=241522
Celeron 333Mhz s370 @ 724mhz 117%
http://valid.x86-secret.com/show_oc?id=196618
Celeron 366Mhz s370 @ 816mhz 123%
http://valid.x86-secret.com/show_oc?id=196764
Celeron 600Mhz s370 @ 1239mhz 106%
http://valid.x86-secret.com/show_oc?id=197570
E4300 @ 4059mhz 125%
http://valid.x86-secret.com/show_oc?id=217106
E4400 @ 4073mhz 104%
http://valid.x86-secret.com/show_oc.php?id=237629
E2140@ 3496 MHz (AIR Sonic-Tower +2x120) +118%
http://valid.x86-secret.com/show_oc.php?id=242791
Here's my E6600 on a cascade.....
http://valid.x86-secret.com/show_oc.php?id=243004
heres mine.109% i think this is
http://img.techpowerup.org/070920/6300.jpg
asus p5b-deluxe/patriot pc7200@560 5.5.5.15 2.3v
151.51% on LN2 :)
Thread at XS:
http://www.xtremesystems.org/forums/...d.php?t=160590
Pictures:
http://extreme.pcgameshardware.de/sh...newpost&t=2081
CPU-Z verification link:
http://valid.x86-secret.com/show_oc.php?id=248702
wow, awsome result fr3ak :eek:
Core 2 Duo E4500
CPU-Z @ 4543.3Mhz, 106.51%
SPI 1M @ 4440.3Mhz, 101.83%
http://img509.imageshack.us/img509/7...mhzcpuzqy3.jpg
http://img220.imageshack.us/img220/5...13156seln9.jpg
hi guys..i am new user here...
this my system....
http://valid.x86-secret.com/show_oc.php?id=241287 w/stock colling...
ICute 420W PSU...
Congratz to you all, just acquired this baby yesterday and started testing it today, it´s my htpc so for now it´s only stock cooled.
Hope i can achieve more with a diferent cooler and ram, but time for testing is short...
for now 105,6% OC
E2140@3300mhz
1,35vCore
Ddr2 667@800
http://valid.x86-secret.com/show_oc.php?id=254307
:D
Hi there, i just saw this today:
http://s2.simpload.com/th_101447121e1f04485.jpg
is it a bug or am i a lucky person?
Cumps
why would you be lucky if you had one ES?
guys, is there anyway to pick a good stepping for e2140 and e6750s without opening up and benching? at least get some idea, maybe all the L626 or L***As are good chips etc ??
Me E6600 on dry ice:
http://img.photobucket.com/albums/v292/Viss1/17.jpg
Max validated.
Max screen:
http://img.photobucket.com/albums/v2.../5ghzsmall.jpg
E2140 @ 465x8 3720 (132.5%)
Validation
Nice E2140 :) Was that on the Vapo?
Cheers .. yes on the stock Vapo and a stock Abit too :)
Celeron 420 :
http://www.htaccess.free.fr/Celeron%...%203563mhz.png
Celeron 430 :
http://www.htaccess.free.fr/Celeron%...430%204073.png
Celeron 440 :
http://www.htaccess.free.fr/Celeron%...%204088mhz.png
E2160 1.8@3.7 on air 1.57 Vcore
http://img221.imageshack.us/img221/1...shot006jb4.jpg
E2140 127.5% OC on Scythe Infinity:up: 1.48 vcore
http://shrani.si/f/43/Xb/1SRW1UBp/untitledcpzuja.png
http://valid.x86-secret.com/show_oc.php?id=258061
104% 2160 1.8 @ 3672 Mhz on Air @ 1.6V core validation
http://valid.x86-secret.com/show_oc.php?id=255600
106% Max Fsb om Air@ 1.6v ( not valid )
http://img123.imageshack.us/img123/9562/412fsbmj4.jpg
I have a E4300 @ 3.6ghz screen.
But I'll try validate it on CPUZ and post asap.
Btw nice results guys.
Me, SoddemFX and Dualist managed this with an E2180
http://img112.imageshack.us/img112/7436/e2180hj3.th.jpg
http://valid.x86-secret.com/show_oc.php?id=260888
Using 1.8V in BIOS under Dualists 2 stage cascade :)
Memory speed is nice too :D
http://valid.x86-secret.com/show_oc.php?id=261954
INTEL Core2Duo E6320 (Conroe) 3850.29mhz 106.229% max temp -24grade
http://valid.x86-secret.com/cache/261954.png
perfect stable at 3.75ghz voltage on auto:D
http://valid.x86-secret.com/show_oc.php?id=266393
INTEL Pentium D 915 (Presler) 5707.06mhz 103.824% 1.59volt max temp -9
http://valid.x86-secret.com/cache/266393.png
single stage by me:D
ciao
E2140 @ 3.2, stock vcore :D 24/7 settings.
http://valid.x86-secret.com/show_oc.php?id=262110
Me pushing it a little.
http://valid.x86-secret.com/show_oc.php?id=262487
I need more time to play!
i got 2 extreme of my runs here.
the max oc i got and the fastest of the superPI runs that i ran.
i got hit by a fsb bug so the 453fsb appears as 448 in cpu-z and POST screen but appears as 453 in bios settings (verified by a local asus motherboard tech support)
http://img.photobucket.com/albums/v215/tarui/CPU1.jpg
http://img.photobucket.com/albums/v215/tarui/CPU4.jpg
You really have the most rediculous results ever!:clap:Quote:
Originally Posted by marcolecorse
This is my E2160 under liquid. :)
Tomorrow I'll try with SS.
http://www.pctunerup.com/up/results/...ate3930mhz.JPG
http://valid.x86-secret.com/show_oc.php?id=275460
http://valid.x86-secret.com/cache/275460.png
Water @ Zalman WB5 @ 24/7
Last screenshot i have left:
http://ekholms.org/stuff/E4300_3600.jpg
Was quite stable too, e4300 (1.6v aircooling), Msi 650i + 2x1G Gskill NT
123,59 % - SeLecT - 4172.20 MHz - Intel E6300 - Asus P5K-E - Wakü
http://valid.x86-secret.com/show_oc.php?id=261376
E2160 @ 3.7ghz (1.585v)
IP35-E
Gskill HK
Valid
http://aycu15.webshots.com/image/354...2647751_rs.jpg
http://aycu24.webshots.com/image/349...2691112_rs.jpg
my first cpu with clock more than 1ghz :D
http://valid.x86-secret.com/show_oc.php?id=267857
http://img80.imageshack.us/img80/2431/61piov1.jpg
dude thats awesome! what cooling? DI?Quote:
Originally Posted by Duniek
SS cooling ;)Quote:
Originally Posted by Sam__
SPI 1M run @ 6150mhz but forget to making screen :(
No doubt, great job!Quote:
Originally Posted by Bigchrome
Celeron 430 1,8GHz @ 4,9GHz = 172.33%:
http://www.hwbot.org/result.do?resultId=668834
http://www.gotweak.dk/Filer/Overcloc...30/CPUZ-oc.jpg
-Dry ice cooled..
I got 100% oc with my E6300/P5K Deluxe (533 x 7 = 3.73GHz), the same FSB as with my P5B vanilla previously, un-modded on air. I didn't try to go any higher or to reduce voltages, tighten timings, ect. This Crucial 10th Anniv. ram runs fine at 612MHz 5-5-5-18. Oddly, the 533MHz default timings for my Crucial Ballistix PC6400 was 5-7-7-24, while the Crucial 10th Anniv. PC5300 default is 5-5-5-24 at the same 533MHz.
I`ve got some results over 100%
For example:
1. Pentium 4 651 Cedarmill - 7910 MHz - 133% - http://valid.x86-secret.com/show_oc.php?id=243464
2. Celeron 347 Cedarmill - 6457 MHz - 110% - http://valid.x86-secret.com/show_oc?id=194617
3. Core2Duo E6320 - 4010 MHz - 115% - http://valid.x86-secret.com/show_oc.php?id=202373
4. Celeron 420 Conroe-L - 131% - http://valid.x86-secret.com/show_oc.php?id=228895
and tjday I`ve got 430 Celeron at 3664 MHz, that is also above 100% (verifications later)
E2140@3607Mhz on air with Scythe Infinity Vcore 1,39V
http://valid.x86-secret.com/show_oc.php?id=277925
http://www.members.lycos.co.uk/mista.../HL/3600_s.jpg
3762mhz@e2160
http://valid.x86-secret.com/show_oc.php?id=283966
E6300 @ 3733Mhz
P5K vanilla no mods
Mushkin 8500 @ 5-4-4-9 2,15V
http://valid.x86-secret.com/show_oc.php?id=284300
http://gm.pc-modz.de/hwl/e6300_l629_...SB_spi_32M.jpg
E6320 on air (Arctic Freezer 7 Pro) @ 1.5875V in BIOS on P5K Vanilla, 1.7VPLL. 108%
http://img526.imageshack.us/img526/5787/5533eo1.jpg
E2140 @ 112% 1.4vcore on air
http://valid.x86-secret.com/cache/285841.png
http://valid.x86-secret.com/show_oc.php?id=285841
Config:
E2140 Vc 1,544
Maximus Formula Special Edition
2x1gb Crucial Ballistix pc8500@562 4-4-4-8 v 2,45
WinLite Xp
Max Pi Liquid cooling ( Ybris Stealth ) Temp H2O 24°
http://www.pctunerup.com/up/results/...3748ram562.jpg
Max Screen:
Asus Maximus Formula Special Edition
E2140@vc 1,54
1x1Gb Super talent a 5-5-5-15
TH2O 3° Tcpu 10°
http://www.pctunerup.com/up/results/...11549_3818.JPG
CPU-Z Validate
Pentium D 915 2800 @ 5600Mhz -> 100% OC
E2140 M0 1600 @ 3936Mhz -> 147% OC
Still Arctic Cooling Freezer 7 Pro...
http://img509.imageshack.us/img509/4166/5596cz3.png
http://valid.x86-secret.com/show_oc.php?id=286957
It does go a couple of MHz further as well, but by then I was concentrating too much on filming and taking screenshots rather than verification files. :)
Loopy83 - Pentium M 740 - 1.792V - 269.05 MHz x13 - DryIce - 101.83%
Setup:
P4P800 Deluxe @ SE VCore Mod
CT479 modded + VCCA Mod
2x256MB OLD BH5
http://valid.x86-secret.com/show_oc.php?id=291504
kind regards Loopy
PS: any further informations needed?
Intel E2180 @ 4GHz (100% OC) @ 1.88V on air (zalman 9500), Abit IP35-E, Supertalent 2x1GB PC6400 DDR2 RAM.
http://i203.photobucket.com/albums/a...h_DSCF7860.jpg
E4400 @ 4136MHz, 1.9v, air
4136MHz
http://shrani.si/t/3q/3C/3hKqWzX8/4136.jpg
Celeron 420 @3200MHz, 1.2625v, air
3200MHz
http://shrani.si/t/3v/8v/EdepmNv/superpi-c420.jpg
hehe nice bro :toast:
Tnx m8 :)
This thread makes me jealous... Good work guys!
Very nice O/Cīs, nice job Razer.
http://www.xtremesystems.org/forums/...d.php?t=176986
Celeron 440 @4.6 go bench :D
http://valid.x86-secret.com/show_oc.php?id=310293
3.8ghz with E2160, Cooled with TRUE
Good god 5gigz with Q6600 :shocked:Quote:
Originally Posted by marcolecorse
Quote:
Originally Posted by Razer
Nice work Razer! :)
I've got the E2160 but I hit a wall at 370 FSB. What's the highest FSB you can get?
@Kolapso - thanks :)
@pL4ciD - the highest stable FSB (for SuperPi :D) with E4400 was about ~410MHz.
About this Celeron, it's a strange one :). It can run @ 3.2GHz rock stable
undervoltaged at 1.2625v, but it can't go higher than, somewhat, 3250MHz, independently of voltage.
I'll try BSEL mod, but I doubt it'll go any higher.
So, 420's wall was at something like 405MHz.
@redratamd & Nelson92 - nice work, guys :)
http://valid.x86-secret.com/show_oc.php?id=265784
E4300 / 135,77% / 1.85V / Cooled by SingleStage
bravo razer samo cijedi :)Quote:
Originally Posted by Razer
Now wheres that screenie??? :D
Had it running at 3437Mhz
Aah, found it..:D
http://img258.imageshack.us/img258/3...3437mhzgi2.jpg
I didnt take it past 1.45v
Hey wots the safe upperlimit? Temps are pretty okay here!
I seem to hav hit an FSB wall at 433 though! It does 433 at 1.39v and wont go past that even at 1.45 so im assuming its a wall! Didnt want to push it further! :shrug:
Advice Ol'Timers? Coz 1.45 is what ill kepp it at max for 24x7!
How high can u push the Vcore, both for a quick benchie an a prolonged one?
No Updates in the first post?
My backup, just in case the next Wolfie dies :)
100%
http://ocidb.com/albums/userpics/101...160-spimax.JPG
Intel Pentium E2140 @ 3560mhZ, 1.5V
Max FSB (445MHz)
http://shrani.si/t/G/Nm/15NfxzDy/max-fsb-e2140.jpg
http://valid.x86-secret.com/show_oc.php?id=320928
SuperPi (16,594s)
http://shrani.si/t/2h/Cy/2cz6V1wN/superpi-e2140.jpg
http://valid.x86-secret.com/show_oc.php?id=320957
C2D E2160 1.80@3.66 http://valid.x86-secret.com/show_oc.php?id=227582
C2D E4300 1.80@3,71 http://hwbot.org/signature.img?iid=55154&thumb=false
Both watercooled.
E2140 @ 3360
E4300 @ 3758
Both cpus on air with P5K Del and TU120X
http://i131.photobucket.com/albums/p...-32m-E2140.png
http://i131.photobucket.com/albums/p...0-1m-14953.png
E4300 on air
max FSB
http://valid.x86-secret.com/show_oc.php?id=292487
max
http://valid.x86-secret.com/show_oc.php?id=307157
What Crucial's ? And what voltage at 550mhz 4-4-4 do you have ?
Ballistix 6400 aveam atunci,2,65V:shrug:
E2160 @ 3852MHz, 114%
Ballistix PC5300 @ 535MHz, 4-4-4-12, 2.2v
http://members.home.nl/ottens.tim/pi...-4-4-12_ac.jpg
I had a cpu-z shot @ 3960MHz but they released the new version the day we were benching so couldn't get it validated :shrug:
E4300 @ 3645, 102.5%
http://members.home.nl/ottens.tim/pi...-4-4-12_ac.jpg
CPU-Z Validation
This one had a fsb-wall on air @ 390.
Both OC's were done with my man Wolff using a modified airconditioner producing air of -13 degrees C.
Quote:
Originally Posted by Razer
nice one bro.
nice!:D :clap:Quote:
Originally Posted by Razer
My 147+% OC on the E2140:
http://www.xtremesystems.org/forums/...d.php?t=181668
Quote:
Originally Posted by tiborrr
nice job bro..:up:
Quote:
Originally Posted by TiMiN8R
http://valid.x86-secret.com/show_oc.php?id=306473
here is my cpu, air only (scythe infinity 2xfans ) this is the wall of cpu on air
http://img523.imageshack.us/img523/9717/pisc4.th.png
100% only @ Bios :D :D :D :D
I don´t remember what vcore i used
http://i38.photobucket.com/albums/e1...m2/3600mhz.jpg
It´s strange cause the FSB wall is between 385 & 390 :(
Damn, I got many 100% oc results :)
P2 233@700MHz
P4 631@6.7GHz
Celly 326@5.3GHz
Celly 352@7.9GHz
E2160@3.6GHz
E4300@3.7GHz
E4400@4.65GHz
etc :P
Most of them at my hwbot profile :)
Thnx, I was pretty pleased myself.Quote:
Originally Posted by kusdra
Got another one:
http://project-acoc.nl/timin8r/oc/43...0mx2%20ds4.jpg
I got my Pentium e2160 @ 3.618, 402 FSB, 1.7 V on water
102 % over clock i think
I think its a bit senseless, to post more and more results.. but nobody will update the first post.... last update was in 2006... thats a long time ago :(
What a bummer!
Maybe someone can make a new one.... so we have a udated thread for this topic...
CELERON E1200 1.6 Ghz Retail. 3703 mhz 1.6 vcore air cooler. %131 overclock.