Bigtoe's modded bios thread.

Printable View

Show 100 post(s) from this thread on one page

09-28-2005, 02:02 PM
ElAguila

Bigtoe I just found out on another forum that dfi is not going to fix the issue with using higher than 113% on the nf4 boards. Do you know what caused the problem? If so is there any way that you can fix the issue?

UPDATE.
I found what the issue is and I was hoping you might be able to fix it since dfi is not going to and with my x2 this bios is only one that runs good with my system. The problem is stated here in post 32:
http://www.dfi-street.com/forum/show...=wrong+voltage

"The bug of 7/04 bios is this bios will program "CPU VID Special Control" first
before setting protection to cpu voltage ...

If you set "CPU VID" to a high voltage , EX : 1.55V then change to a low " CPU
VID " and a high " CPU VID Special Control " in the same time , hit the save and exit ...
Before the bios set the " CPU VID " to low voltage , the "CPU VID Special Control"
will be programmed first without protection and may generate some core voltage
like 1.55V * 1.36... Although it's a very short period , but If the cpu can not
handle this voltage , the cpu will be dead ... Especially 90nm core cpu ..."
10-04-2005, 02:30 PM
unc_fester

Hi!

I'm sure u guys can help me!
I can't add any voltage to my RAM, so it I can't run my CPU @ it's rated frequency. :mad:
So my question is: Can u (Mr. Bigtoe) make change my BIOS so I can adjust memory voltage??? :confused: :confused: :confused:
Here's the BIOS file -> http://www.asrock.com/support/bios/845D_P1.50.zip

THX in advance! ;)
10-11-2005, 05:29 AM
Timofonica

Hello!!, p4c800 E deluxe has 1,600v max to prescott cpu, is possible by modding lastest bios to put more v to this cpu´s, thanks..

PD: i´m spanish so me english will be a little incorrect or bad written sorry :(
10-14-2005, 09:01 AM
ken

hi there :)
I know you been very busy atm but if you got spare time, can you have a look at the DFI DAGF BIOS to see if there are any thing you can unlock and tweak it abit :)
here the link :http://www.dfi.com.tw/Support/Downlo...FLAG=A&SITE=US

thanks alot
ken
10-14-2005, 09:47 PM
Kin Hell

Strange!.......

Quote:

Originally Posted by Timofonica

Hello!!, p4c800 E deluxe has 1,600v max to prescott cpu, is possible by modding lastest bios to put more v to this cpu´s, thanks..

PD: i´m spanish so me english will be a little incorrect or bad written sorry :(

My P4C800 E Deluxe Bios offers me a range of 1.3750v to 1.9500v!? This is version 1023 from Asus site. I can't see it being like this for me just because I have had a 2.8 Northwood in earlier. The Bios has been reset several times whilst trying to OC my new 3.2 Prescott. Shes running 255 fsb (4.07Ghz) at 1.55v and is Prime Stable. Air cooled using T.R. XP120 with 1400rpm vantec 120mm fan, Idle Temp @ 38/39DegC, max load Temp 49/50DegC

To be honest, I'd refrain from going much over 1.550 anyway, unless you are Phase Changing to get the heat away. CPU migration starts happening at silly voltages & 1.75v was the max to be safe on the Northwoods. Allowing for a 0.2v over stock to be safe, then 1.55v would be the safe limit for the Prescott, though there may be more headroom with the smaller Die Size!

Maybe re-flashig your Bios would resolve your querey. Good Luck! :)
10-15-2005, 06:51 AM
Timofonica

I have the same bios like you, presscot 3,4 ghz, drop 14x the multy and 285 fsb geil ultra x 2.5 4 4 8 4 clocks 2.65v, stable at 1,600 v, that it´s the limit in this motherboard to this prescott, i can put 1,625 ando more, but the mobo do not starts, because the limit that have this mobos and bios on prescott, the refrigeration it´s medium - good zalman 9500, and the case good refrigerated with silentxs 12 cm, also the chipset, i think that it´s possible to modify the bios instead of doing the v mod to the mobo, is it possible by bios???, how can i´ll do it??, thanks ;)
10-30-2005, 12:33 PM
Gogar

Hi tony i am new to computer.. i want overclock!!!! can you come to my house and overclock pc K THX!!!!!!!!!!! :)

LOL reading all these posts i'm starting to feel bad for tony :D
10-30-2005, 06:02 PM
Kin Hell

:D

Quote:

Originally Posted by Timofonica

I have the same bios like you, presscot 3,4 ghz, drop 14x the multy and 285 fsb geil ultra x 2.5 4 4 8 4 clocks 2.65v, stable at 1,600 v, that it´s the limit in this motherboard to this prescott, i can put 1,625 ando more, but the mobo do not starts, because the limit that have this mobos and bios on prescott, the refrigeration it´s medium - good zalman 9500, and the case good refrigerated with silentxs 12 cm, also the chipset, i think that it´s possible to modify the bios instead of doing the v mod to the mobo, is it possible by bios???, how can i´ll do it??, thanks ;)

I'm guessing you can't do sweet FA about it. A close friend of mine has a 3.4 & he can change the Multiplier to 14 on his. Not sure what his voltage selections are, but my 3.2 Prescott is LOCKED at 16 multiplier with no other choice. So, one could assume (even though assumption is the mother of all fuc* up's) that the 3.4 Prescott has something different about it's architecture compared with its lesser siblings. Having said that, my m8s 3.4 will do 4Ghz @ X17 multipler with 235 fsb. Yet when he drops the Multiplier to 14, it will not do ANYTHING over 250 fsb which sets the CPU @ 3.5Ghz? Now that is really wierd and using the mother of all fuc*ups again, one can only "assume" the Chip is falling over on its CORE speed & not the FSB. A lot of people refer to the Core Speed of the chip as the FSB. This is not true. The Core speed of the CPU is NOT the FSB. The Core speed of the CPU is the resultant speed determined by the FSB of the chipset.
On a brighter note though, you are very lucky to get 285fsb compared to my m8's CPU which he can only get 250fsb with, at a 14X multiplier. My 3.2 does 256FSB at 16X which slaps this baby at exactly 4.1Ghz, on Air! Not happy at chucking 1.55V at it tbh, but then hopefully, Hipro5's MAXIMISER will stop the Vcore Droop & give me a little more! Whilst shouting here, I got 2 x 1Gb PC 3200 ram running at 256FSB 1:1 with 2.75V & 3-3-7 timings at CAS 3. That is just bloody awesome considering I paid £40.00 a stick brand new! :D
Even if you ran the bios through a Bios Editor, I'm not sure that there would be ANY voltages available over 1.65v because the 3.4 core appears to be very different from the slower Prescotts. As I said earlier, unless you are using some serious Phase exchange cooling, FORGET using more than 1.55 volts anyway as you are probably going to burn out the CPU. :stick:
EDIT* Your English is far better than my Spanish, as I dont know any Spanish at all. I hope you can understand what I have tried to explain to you here & I'm poking you with a Stick to listen SERIOUSLY about OVER-VOLTING the Prescott. Its a very HOT Core by default, untill you hit the the J series of Socket 775 CPU's. Please be vey carefull or it will all end in tears & a Dead CPU.
11-01-2005, 02:19 AM
blind_ripper

so is there a modded or a sorte of bios for the dfi RDX200 CF-DR ,
thate fixes the htt 300+ problem yet ?
11-14-2005, 07:50 AM
Kjaups

can u add ram, agp and chipset voltage measuring in bios for ASUS P4800-X latest bios
11-15-2005, 10:02 AM
bobikobic

Albatron PX865PEC Pro

Can you unlock cpu, dimm voltage and thermal monitoring for Albatron PX865PEC Pro.
bios link
Thanks!
My e-mail bobikobic@hotmail.com
11-17-2005, 10:30 AM
eric_croatia

Can you mod a bios for dfi lanparty ut nf4 ultra-d ?
11-18-2005, 03:02 PM
Severus

I'm looking for a modded bios for epox 8npa7i. It's said that i can give up to +0,35V for CPU but in fact i can only give +0,15V :| My CPU needs higher Vcore to go up but all i can give is 1,55V...
11-19-2005, 02:40 AM
The Stilt

Quote:

Originally Posted by Severus

I'm looking for a modded bios for epox 8npa7i. It's said that i can give up to +0,35V for CPU but in fact i can only give +0,15V :| My CPU needs higher Vcore to go up but all i can give is 1,55V...

The newest bios version has +0.35V option (just checked).
8NPA7I v. 05.11.07
11-19-2005, 02:41 AM
The Stilt

Quote:

Originally Posted by Kjaups

can u add ram, agp and chipset voltage measuring in bios for ASUS P4800-X latest bios

Those features are not supported by hardware.
Use the multimeter instead.
11-19-2005, 02:22 PM
Severus

The only problem is that I've got the newest epox BIOS and even so I can't give higher vcore -,-'
11-20-2005, 10:02 PM
r3w4

I want to modify my bios for a MS6702 K8 motherboard. AMIBCP 225beta will not open any bios for the board. MMTool opens the bioses, but I have no idea how to change things. Is there a guide for MMTool?

I found a AMIBCP 2.43.2.0. It still won't open the bios, but now it says that a "language module" isn't with the bios.
11-21-2005, 12:23 PM
debaucher

Hello everyone.
Just read through this entire thread (quite a read) and am trying to get my hands on some modded bios's for the IC7-MAX3, but all the links posted in this thread seem to be dead.
Does anyone have the latest/best modded bios or links to them for the IC7-Max3?
And if so... could you list them/send them to me?
I will provide email upon request via PM etc...

Thanks in advance.
D.
11-28-2005, 05:39 PM
lofiunico

Could someone please help me with the BIOS for the Asrock P4DUAL-915GL. All I want is some vcore/cpu voltage adjustment. The BIOS doesn't seem to have any hidden options, so I was pretty stuck. Thanks in advance.

File: http://www.asrock.com/support/bios/P4915GL1.30.zip
12-01-2005, 01:38 AM
ShaTR

Bigtoe,

Any chance of unlocking the hidden menu's in the gigabyte GA-K8NS???? (rathern than having to hit ctrl-F1 or something like that. i never remember)
Also maybe unlocking some voltage options. It's a good board, but more vdimm/vcore would be nice.

Cheers!
12-17-2005, 03:43 PM
franz.b

My mb is a gigabyte ga-7n400pro2rev2. I mod the last ufficial bios updating the ide raid and the sata last bios and unbloking the hidden menu. I can send it to anyone who is interessed or who can post it somewhere.
Now I'm interesting to other modding but I'm not able to... :shrug:
in particular I'm interesting to unblock the multiplier, permit 16 timing to PCI device, and any other for best performance. I found this thread: http://www.hwupgrade.it/forum/showt...threadid=785101
in which i found modded bios for the ga-7n400pro2rev1, but it is not compatible with the mine... (sure? perhaps i can only update the sata bios? but it's only an f6, the offical last is f11) and I would replace in my bios the same modifies. can anyone help me?
in this other link http://www.xtremeresources.com/forum...ad.php?t=34627 I found a Silicon 3512 modded bois, but the download is break. has anyone downloaded it? or anyone know a miror?

thanks a lot
12-17-2005, 11:02 PM
Kin Hell

Quote:

Originally Posted by debaucher

Hello everyone.
Just read through this entire thread (quite a read) and am trying to get my hands on some modded bios's for the IC7-MAX3, but all the links posted in this thread seem to be dead.
Does anyone have the latest/best modded bios or links to them for the IC7-Max3?
And if so... could you list them/send them to me?
I will provide email upon request via PM etc...

Thanks in advance.
D.

I did PM you about these modded Bios files, I have several here!

Do you want them or not? :stick:
12-21-2005, 10:23 PM
jbmx4life

SOYO P4VTP Bios......
http://www.soyousa.com/downloads/filedesc.php?id=2238

Can someone take a look at this for me please and let me know if there is anything that can be done with it? Thanks in advance!
12-28-2005, 02:10 PM
Tony

Asus A8R-MVP 0037 bios as used by Wesley at AT on his review. Good for TCCD, TCC5 UCCC and infinion, but crap with BH5 and UTT

grab it here
12-30-2005, 01:10 AM
dxtr

Guys, especially Tony, maybe u got some modded stuff for IC7/IC7G ? Plz post it if u have.
12-30-2005, 02:22 PM
davekusa

ic7 max 3

need modded bios for IC7 MAX 3

Pentium 552 (mobile p4 3.46)
system will not finish boot with HT enabled (works with HT disabled)

NOTE: IS7 motherboard works with same cpu and HT
12-31-2005, 03:55 AM
rammbfm

Thx using the 704 bios for my dfi ultr-d very cool! Works fine!
01-07-2006, 12:22 AM
jbmx4life

Quote:

Originally Posted by jbmx4life

SOYO P4VTP Bios......
http://www.soyousa.com/downloads/filedesc.php?id=2238

Can someone take a look at this for me please and let me know if there is anything that can be done with it? Thanks in advance!

:stick:
01-07-2006, 11:31 PM
Nanometer

Would it be possile to mod an A8N-SLI Premium bios, to get back the 1.65 vcore max that was taken away in all new BIOS revision? Wish I could find some information on what values in the bin file could change it.
02-24-2006, 04:43 PM
sly322

is there any bios for k8nsc-939
?
02-25-2006, 05:27 AM
Riska

Can you help me to unlock evrything in the shuttle sn25p barebone bios they have put up a new one and it have fixes for raid but they have locked the fsb to 250mhz and i know there is many other things aswell.
thanks.
fn25s027.zip is the new one.
ftp://ftp.shuttle.com/BIOS/sn25p/
02-25-2006, 05:28 AM
Riska

And can u fix the problem whit the boot logo and x1800xt and x1900xt gfx cards other mobo manufactors have done it but not shuttle
03-06-2006, 10:20 AM
fabbro76

Hello everyone!!! I need help.....
I own a Epox 9NDA3J rev 2.x and I would know if exist any modded bios after the latest official.......

Thank You and sorry for my english. :):p:
03-13-2006, 06:04 PM
mrhelix

any bios mod for asus K8N-E plzzzz
03-14-2006, 09:39 AM
OCPerformance

A Bios mod for DFI lanparty NF3 Ultra D (activate 4V please if possible)

Ist it possible to activate in DFI lanparty NF3 Ultra D Bios the 4V
like In the DFI lanparty NF3 UT 250GB Bios ?

3,2V are to little
03-14-2006, 09:55 AM
karlsdash

hey i have an intel 845 pe chipset and i was wondering if there was any mods for it? I have tried a few things but i get a flash memory error.... any help would be appreciated!! Thanks
heres the site http://intel.com/products/motherboar...pemy/index.htm

P4 2.4 g
512 mg ram
7800gt
230 g sATA
Dell 4550 originally still dell board..... waiting for conroe, or fx-60 to be cheaper!!
03-18-2006, 11:03 AM
markee

ATTENTION PLEASE!!!
ASUS P4C800-E DELUXE
MODDED BIOS FILES NEEDED
miras03@op.pl
03-24-2006, 11:56 AM
Sam666

Any bios's for Abit AN8 SLi Fatal1ty
03-25-2006, 07:20 AM
kiwi

Gigabyte K8NS
Bios f18

Basically vcore max is only 1.55V (10% in bios) and I would like to get 1.7V or so.

http://www.giga-byte.com/Support/Mot...S&FileID=11727

I tried using this award bios editor but somehow it didn't work:
http://sourceforge.net/projects/awdbedit/

Actually I've been thinking for a long time to start modding bioses myself but I just dont know where to start.
03-25-2006, 07:36 AM
Raphie

Guys i assume this was a DFI only thread. Might be good to note Big toes last post in this topic before placing anymore "me too" requests.....:stick:
03-25-2006, 07:46 AM
kiwi

Sorry, I didn't read all pages :) I am just trying to figure out why can't I edit award bios with modbin and awdbedit. Modbin gives me header sum error.
03-28-2006, 05:52 PM
RobOC

ASUS A8N-SLI premium request bios

Hy Guys...:)

The a8n-sli asus mobos have a very big problem in this crazy world of machines...the Vcore is very slow...There is a lot of people posting in a lot of forum crying for an vcore increase, or, on the other hand, an unhide of all posible options to do a decent OC.:banana:

Would it be possile to mod an A8N-SLI Premium bios, to get back the 1.65 vcore max that was taken away in all new BIOS revision?:clap:

This is the last official version:
http://dlsvr01.asus.com/pub/ASUS/mb/...m/A8NSP009.zip

and this the last beta:
http://dlsvr01.asus.com/pub/ASUS/mb/...m/1011-006.zip
anyone can kill the beast? :confused:

Please help me and a lot of owners of this mobo...who make it possible (at least anything) would be the boss for all us!

Thanks in advance an sorry for my poor english.

Best wishes...Rob;)
04-03-2006, 04:44 PM
Tony

Infinity RS482 beta bios full unhides etc.

Grab it here
04-03-2006, 05:07 PM
jonspd

Tony I take it you never got my p.m.?

jonspd
04-03-2006, 05:34 PM
Tony

Quote:

Originally Posted by jonspd

Tony I take it you never got my p.m.?

jonspd

I may have done, been real busy of late. send again
04-03-2006, 05:35 PM
Tony

Workin on the latest beta for the Infinity, will post soon
04-04-2006, 01:39 PM
jonspd

Ygpm
04-04-2006, 05:33 PM
Haltech

Quote:

Originally Posted by Tony

Infinity RS482 beta bios full unhides etc.

Grab it here

ill give this a whirl tomorrow. Tony, what was changed in this beta?
04-08-2006, 08:31 AM
Tony

0406 DFI NF4 bios files, all 3 in one zip
VE = venus
EX = Expert
last one is old skool NF4

Added option for "odd divisor correct" removed write cas latency (fixed at 1)
Added hidden options for VE and EX Vdimm to over 4V and chipset to 2V
Relaxed all timings as per BTA bios files for ease at boot, CPC2T etc, should be boot friendly with most dimms.

TRAS may report 0 on reboot, set optimised defaults and reboot back to bios and it should set 8.

I have the Venus loaded here and its clocking real nice, remember this is 3rd party so no warranty off me, DFI or OCZ, use at your own risk.

Tony

Grab it here
04-08-2006, 08:40 AM
Mr. Tinker

May I be the first to say THANK YOU!
04-08-2006, 08:41 AM
bachus_anonym

Tony, since you're the only one I can ask regarding this...

I have a question regarding latest beta (3/29) from Oscar for DFI NF4 Ultra-D/SLi/SLi-DR... Do you have any idea why div150 is not selectable in BIOS anymore with Opteron 146 and multi x10? It's just funny how it's there in 6/23, then not in 7/04, then back again in 11/14 and again, not in 3/29 :confused:

I'm taking advantage of you appearing in this thread once in a while... :D

BTW, thanks for another modded BIOS, although I have not used any of them :D :p:
04-08-2006, 03:04 PM
Aleman

Quote:

Originally Posted by bachus_anonym

Tony, since you're the only one I can ask regarding this...

I have a question regarding latest beta (3/29) from Oscar for DFI NF4 Ultra-D/SLi/SLi-DR... Do you have any idea why div150 is not selectable in BIOS anymore with Opteron 146 and multi x10? It's just funny how it's there in 6/23, then not in 7/04, then back again in 11/14 and again, not in 3/29 :confused:

I'm taking advantage of you appearing in this thread once in a while... :D

BTW, thanks for another modded BIOS, although I have not used any of them :D :p:

I want to add a question to the one of bachus

what is the FSB KeyIN option in the 3/29 BIOS?

Code:

9. Change FSB option to keyIn method.

and how does it work? is it a hotkey to set a different FSB?
04-08-2006, 04:05 PM
ShaTR

hey tony, any chance of diff "special vcore %" options on the NF4 bios?? an 8% and 16% would help me out wonders, since i run overclocked with CnQ enabled. thx.
04-08-2006, 04:07 PM
Pyr0

Quote:

Originally Posted by Aleman

I want to add a question to the one of bachus

what is the FSB KeyIN option in the 3/29 BIOS?

Code:

9. Change FSB option to keyIn method.

and how does it work? is it a hotkey to set a different FSB?

this just means that you can enter a number to set the FSB instead of having to cycle through all the values to get to the one you want :up:
04-08-2006, 06:22 PM
Delirious

THANK YOU!

Two questions, what exactly is the odd divisor correct, not sure its what i think it is?

And for the dram drive strength they are listed as "weak" and "normal" but then there is one that is "level 7"?

Quote:

Originally Posted by Tony

0406 DFI NF4 bios files, all 3 in one zip
VE = venus
EX = Expert
last one is old skool NF4

Added option for "odd divisor correct" removed write cas latency (fixed at 1)
Added hidden options for VE and EX Vdimm to over 4V and chipset to 2V
Relaxed all timings as per BTA bios files for ease at boot, CPC2T etc, should be boot friendly with most dimms.

TRAS may report 0 on reboot, set optimised defaults and reboot back to bios and it should set 8.

I have the Venus loaded here and its clocking real nice, remember this is 3rd party so no warranty off me, DFI or OCZ, use at your own risk.

Tony

Grab it here
04-09-2006, 04:40 AM
Tony

Level 7 is Weak 4, i have corrected this

Key in method is so you key in the fsb you want and it will show this, remember to have key lock engaged on your keyboard.

150 divider, seems to be CPU related I think, i will look into it.

Remember the registers that were reserved for 150 may be used on some CPU's for the new upclock ratio's now
04-09-2006, 04:42 AM
Tony

Quote:

Originally Posted by ShaTR

hey tony, any chance of diff "special vcore %" options on the NF4 bios?? an 8% and 16% would help me out wonders, since i run overclocked with CnQ enabled. thx.

Harwware limied m8, so no can do. Remember the I/O chip handles these options and it only has a fixed amount of registers it can tweak per the voltage regulator that is used ont he board. Only a vdimm mod will get you whaat you need.
04-09-2006, 05:35 AM
Lane-k

Same ask what is exactly doing the ODD correction? and in what case it must be enabled?

i have flash it and begin some test.. I have leave ODD enabled for the moment..
04-09-2006, 06:03 AM
Tony

It slows down your ram by altering the way it rounds what dividor your cpu will use to calculate the ram speed.
04-09-2006, 06:38 AM
sergiu

I have a P4P800 motherboard and I would like to mod my bios for allowing me to use smaller vcore for my P4 2.4c (1V or below). I want to make a silent pc and decreasing vcore (in combination with smaller FSB) would allow passive cooling). The bios can be found at http://dlsvr01.asus.com/pub/ASUS/mb/...0/P4P81019.zip . I opened my bios with AMIBCP 2.25 beta and I saw that there are strings even for 0.835V, but I have no idea how to modify the bios.
04-09-2006, 06:58 AM
Delirious

Quote:

Originally Posted by Tony

It slows down your ram by altering the way it rounds what dividor your cpu will use to calculate the ram speed.

So basically it allows you to further tweak the divider you use?

Sorry im not the sharpest tool in the shed.:D

Any example would really help and be much appreciated.
04-09-2006, 12:38 PM
ShaTR

Quote:

Originally Posted by Tony

It slows down your ram by altering the way it rounds what dividor your cpu will use to calculate the ram speed.

a vdimm mod or vcore mod??????????

if vdimm mod, can someone please explain to me how that works. cheers!
04-09-2006, 01:09 PM
Tony

Quote:

Originally Posted by ShaTR

a vdimm mod or vcore mod??????????

if vdimm mod, can someone please explain to me how that works. cheers!

should ve vcore mod, sorry m8 had a long day
04-09-2006, 01:11 PM
Tony

Quote:

Originally Posted by sergiu

I have a P4P800 motherboard and I would like to mod my bios for allowing me to use smaller vcore for my P4 2.4c (1V or below). I want to make a silent pc and decreasing vcore (in combination with smaller FSB) would allow passive cooling). The bios can be found at http://dlsvr01.asus.com/pub/ASUS/mb/...0/P4P81019.zip . I opened my bios with AMIBCP 2.25 beta and I saw that there are strings even for 0.835V, but I have no idea how to modify the bios.

look for the really early builds of the bios for your board, they allow for some real low Vcore. The only issue is the mosfets get pushed real hard and may blow...tyrust me i did the same thing with a celly mobile a good while back running 1.1Vcore
04-09-2006, 01:11 PM
ShaTR

lol. no worries. thx anyways. guess im stuck at 2.75 then!
04-09-2006, 01:13 PM
Tony

Quote:

Originally Posted by Delirious

So basically it allows you to further tweak the divider you use?

Sorry im not the sharpest tool in the shed.:D

Any example would really help and be much appreciated.

I corrects the rounding off of the ratio's you have to use to work out your ram speed. It seems to go to the oposite ratio next instead of theusual one it uses which is usually the next ratio up.

We found from tests it is like the 180 mode if running 200fsb, BUT from running a 250 ratio it seems to drop you inbetween the 250 and the 233
04-09-2006, 01:22 PM
ReelMonza

Hold on Tony, I'm writing you a PM
04-10-2006, 08:19 AM
sergiu

How "early" must be the bios? The first bios version I can find on Asus site is 1009, and I still can't use lower vcore. Also, my motherboard came with version 1012. Is it safe to put something much "early"?
04-10-2006, 07:18 PM
ShaTR

quick question:

which bios is this 0406 one based off of????

I don't see any 0406 on DFI's site (beta or final release section)

???
04-10-2006, 07:25 PM
Pyr0

it's based on the 3/29 bios :up:
04-11-2006, 01:41 AM
cantankerous

Tony, I want to take this time to thank you. I have been reading this forum for a few days and had actually downloaded all 3 versions of the 406BTA bios but never did give you a thanks. I finally flashed it yesterday. I had a hard time posting but finally got it going after a CMOS clear. I really don't see any change from any other bios on my system but I do thank you for your time and effort. It isn't doing any harm so I am going to keep it on my Ultra-D. I am using an even divider so can't even fool with the new divisor option but we will see what happens when I get my 2GB PC4000 EB Plat kit next week. Thanks again.
04-12-2006, 02:51 PM
Tony

CFX3200 bios that I tweaked a little. DFI released me to post this as a 3rd party BT bios so here it is.

Relaxed timings, 2T at default and pretty boot friendly, tweak it for speed as usual.

Grab it here

If you already downloaded this file download again and overwrite the old one, i have updated this file with more fixes.
04-14-2006, 12:43 AM
AlterBridge86

Awesome job Tony - i just ordered a CFX3200 from NewEgg and was trying to download your bios to get myself ready but it seems your link is broken :( Could you fix? Thanks!!
04-14-2006, 12:03 PM
mucker

Tony, have you reworked any Epox bioses? I have a 9NPA+ Sli that is lacking a couple of settings compared to my DFI Ultra-D.

Is it possible to add a 180/200 memory divider. There is nothing between 166/200 and 200/200.

Also, can a Tref value of 1.95 be added. Currently there is 15.6, 7.8, and 3.9 only. Thanks...

m :)
04-14-2006, 03:14 PM
Tony

Untweaked 037 bios for the DFI CFX3200, be sure to set MAL and RP manually to at least 5.5 and 7 once its flashed and you must manually set TREF also, do NOT leave it at AUTO.

Grab it here
04-15-2006, 06:53 AM
cronic

ok i got a venus on the way. Tony what bios do you reccomend for UCCC 2 x 1 gig kit. Thanks
04-16-2006, 04:41 AM
Fayt_Leingod

Could someone PLEASE release a modded version of the BIOS for an Asus A8N-SLI Premium with a higher VCore or VDimm. Preferably both.
Thanks in advance! :)
04-18-2006, 09:54 AM
MsB

Bios Mod Wish- INFINITY RS482 bios that would allow me to set my ocz and g-skill pc4000 cache latency to value of 4 instead of being limited to 3.
04-18-2006, 04:04 PM
DemonicInfluenc

Bios Mod:

P4P800-E Deluxe with full PAT and more vdimm options like more intervals ;)
04-19-2006, 12:10 PM
Bootsy

Someone PLEASE release a modded version of the BIOS for an Asus A8r32 Deluxewith a higher VCore.
04-19-2006, 01:39 PM
Tony

Quote:

Originally Posted by Bootsy

Someone PLEASE release a modded version of the BIOS for an Asus A8r32 Deluxewith a higher VCore.

The issue is the I/O output may not allow higher..if the hardware switch will not allow higher there is nothing you can do without hardware mods
04-19-2006, 01:40 PM
RyderOCZ

Quote:

Originally Posted by DemonicInfluenc

Bios Mod:

P4P800-E Deluxe with full PAT and more vdimm options like more intervals ;)

Google for BigToe's PAT hack....all the info is out there for the PAT part of your request.

Vdimm options are limited to what the board is capable of producing which depends on the components on the board, not just a bios mod.
04-19-2006, 05:08 PM
DemonicInfluenc

Quote:

Originally Posted by Tony

The issue is the I/O output may not allow higher..if the hardware switch will not allow higher there is nothing you can do without hardware mods

I mean like more choices for the low volts. Not necessarily higher..

LIke right now I have 4 options for the volts from 2.55-2.85.. Maybe 10 choices in same volt range???

Quote:

Google for BigToe's PAT hack....all the info is out there for the PAT part of your request.

Tried that... But that killed my bios :( So, I was hoping for maybe a modded bios will do the trick :)
04-23-2006, 11:54 AM
DemonicInfluenc

In a post in Abxzone:

http://abxzone.com/forums/showpost.p...&postcount=329

It said you know the way to set the 533 strap in AMIBCP.

If so, then could you tell me how?

Sorry for Double Post :(
04-23-2006, 10:07 PM
rastaseb

I don't really understand what means the "odd divisor correct" on the last modded bios for DFI Expert!
when set, my bandwith is about 7110 mb/s on sandra 2005 and when off, it gives me 7600 mb/s

but i'm still synchrone : 275*11 on my opty 148 and ram at 275

the latest version of cpu-z 1.33.1 gives my memeory frequency at 252 when the odd divisor correct is set....
06-25-2006, 08:00 AM
$ilver

Modded Bios for Biostar T-Force 6100 939 ?

There must be some hidden setting for higher chipset voltage and dividers :)

would be nice
06-29-2006, 08:11 PM
STEvil

Quote:

Originally Posted by rastaseb

I don't really understand what means the "odd divisor correct" on the last modded bios for DFI Expert!
when set, my bandwith is about 7110 mb/s on sandra 2005 and when off, it gives me 7600 mb/s

but i'm still synchrone : 275*11 on my opty 148 and ram at 275

the latest version of cpu-z 1.33.1 gives my memeory frequency at 252 when the odd divisor correct is set....

http://www.xtremesystems.org/forums/...ad.php?t=95860

ODC icreases the memory divider when running an odd CPU multiplier (1,3,5,7,9,11,13,etc)
06-29-2006, 08:20 PM
STEvil

tony or someone, any options worth unhiding in this bios? Cant adjust much of anything at all as it is :(

ftp://ftp.hp.com/pub/softpaq/sp30501-31000/sp30514.exe
07-03-2006, 03:09 AM
Hardass

Looking for a new bios to try in my P5AD2?
07-06-2006, 01:29 AM
luca_rastor

Guys i need new bios for my old Abit BH7. Anyone has some? I need some dividers, cos i went to a 800 FSB CPU and can't go with it past 215 cos of my memory. OCZ performance :( is not so good.

All dividers i have are 1:1 3:4 and 4:5. I need one with 4:3 or 5:4, something to allow me go high FSB lower DDR frequency.

Thanks alot. This board is wicked sick. I ran before a Pentium4 2Ghz at 3,3 stable one year by now. Changed it cos this new one has HT, which improves the performances quite well.

Please help me with some link for new bios.
07-07-2006, 09:11 PM
m_i_o

What is the best bios for DFI LP NF4 SLI Expert with Crucial Ballistix mems?
I'm working on last release from DFI and I reached 265MHz 3-3-3-8. Everything is seams to be stable but I faced with 3D mode problem when PC hanged up while running 3D applications (Games, marks, etc.). Setting of driver level = 7\1 helps to pass 3DMakr2005 but still impossible to pass 3DMark2003. Today I will try to release timings a little. So I'm looking for more stable BIOS.
08-06-2006, 12:49 PM
lucas81

Quote:

Originally Posted by Fayt_Leingod

Could someone PLEASE release a modded version of the BIOS for an Asus A8N-SLI Premium with a higher VCore or VDimm. Preferably both.
Thanks in advance! :)

I second this request! Only 1.5V now at the 1302 beta bios.. :(:(
08-18-2006, 01:44 PM
dippyskoodlez

Possible for anyone with the tools to check ami bios's if they can see if tehre anything to un-hide in the MSI K9N Neo (AM2) bios?

This thing has crap for options.. :mad:
08-29-2006, 03:59 AM
SirMute

Hi!

Please take a look at bios for Asrock 775dual-VSTA Click

It has mentioned in MultiLanguage part of rom, available core voltages, but they're not shown in bios itself.
Is there any possibility to unhide vcore regulation?

Thanks in advance.
M.
08-29-2006, 01:07 PM
xero freelance

hi umm...mr big toe sir?
can you take a look at the GA-K8VM800M?
all i really need is teh pci/agp bus frequency locked
if you find any other options that would help along the way thats great
thanks a million :)
09-03-2006, 05:56 AM
DEVIL K-ce

Hi Tony

My friend in Poland have problem with P5B Dlx Wifi

Power mobo and Chassis Intruded. Clear cmod and nothing.

Can You Tony mod the bios too Asus P5B Dlx Wifi and delete the verification of chassis intruded, or disabled this function ?

This is link too org. bios ---> http://195.117.93.7/witek/0609.ROM

Thank's for help.
09-04-2006, 04:08 AM
TaPaKaH

P5B nonDLX request

A bit more Vdimm&Vmch, please (if possible) :D
09-05-2006, 01:53 PM
I)ickie

Quote:

Originally Posted by TaPaKaH

P5B nonDLX request

A bit more Vdimm&Vmch, please (if possible) :D

Definately secconded,

Also I don't know if anything can be done with the DFI 975X/g. You seem to specialise in DFI bioses and a lot of people are lost with this board.

Obviously you have 1000's of requests in this thread and completely understand if you ignore my post.
Thanks
I)ickie
09-05-2006, 02:20 PM
Tony

P5B ehh, i will take a peak, in the maen time have a look at the vreg for the vdimm, it may already be maxed out and nothing but a hard mod will get you what you need.
09-15-2006, 02:19 PM
PowerToTheUsers

Quote:

Originally Posted by SirMute

Hi!

Please take a look at bios for Asrock 775dual-VSTA Click

²

Although 1.80 is out now: http://download.asrock.com/bios/775/...VSTA(1.80).zip

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 02:50 PM.

XtremeSystems