MaximusIV-Extreme Thread

Printable View

Show 100 post(s) from this thread on one page

08-27-2011, 03:52 AM
Sauron_Vie

Quote:

Originally Posted by sin0822

whats the best BIOS for the Maximus 4 Gene-Z?

qgshadow, open up the DPC latency checker program, its a free download, see if those programs produce DPC latency spikes. I have had programs that do that random freeze my BFBC2 on MP before.

using the last official one.. performing not so bad, but i have problems running these f*****corsair vengeance with reasonable speed.
08-27-2011, 08:50 AM
Devil_Dog

I just started OC'ing with thus board and am loving it but how do I get past the CPU voltage error during post? Anyway to bypass this?
08-27-2011, 09:13 AM
Leeghoofd

just put the setting to ignore in the monitor tab
08-27-2011, 09:16 AM
Devil_Dog

Thanks!!!!
08-27-2011, 10:27 AM
Devil_Dog

Well, I'm loving this board. With my UD7 I was only able to get up to 54x with my chip. The same chip I can get to the Windows logo screen @ 59x.:eek: Don't know if my chip woke up or what but I'm not complaining.:D
08-27-2011, 10:37 AM
deachus

Quote:

Originally Posted by Devil_Dog

Well, I'm loving this board. With my UD7 I was only able to get up to 54x with my chip. The same chip I can get to the Windows logo screen @ 59x.:eek: Don't know if my chip woke up or what but I'm not complaining.:D

You can get to the windows loading Logo? Or you can get to the windows logon screen? I can get to the windows loading logo with 59X on all of my last 4 chips but only 2 would boot into windows and get to windows logon screen at 55X and 56X. The rest of the chips would freeze at windows loading logo no matter what voltage or settings but would post all the way up to 59x.
08-27-2011, 12:32 PM
Counter CS

Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.

P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.

I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.

I'm starting to think that the problem is my CPU memory controler.

i am using BIOS 3D01_2 (1905)

Need some advise to get this thing running 2133Mhz ... anyone ?
08-27-2011, 12:57 PM
Leeghoofd

VRM frequency upped ? which timings and volts did you try for the dimms ?
08-27-2011, 01:01 PM
Counter CS

Hi, thx for trying to help.

Well, i was trying 8-8-8-24-1T 1.65v, vccsa: 1.05v Vccio: 1.15v
CPU @ 4ghz 1.3v just for test Dram clocks.

But didnt touch VRm Frquency.
08-27-2011, 05:51 PM
Martin.v.r

NF200 voltset help mem an cpu
cpu ? low vcore :)
08-27-2011, 06:40 PM
l0ud_sil3nc3

Quote:

Originally Posted by Counter CS

Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.

P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.

I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.

I'm starting to think that the problem is my CPU memory controler.

i am using BIOS 3D01_2 (1905)

Need some advise to get this thing running 2133Mhz ... anyone ?

not all hypers play well with sb.

try giving them some more volts (1.7ish)
08-27-2011, 06:40 PM
l0ud_sil3nc3

Quote:

Originally Posted by Counter CS

Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.

P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.

I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.

I'm starting to think that the problem is my CPU memory controler.

i am using BIOS 3D01_2 (1905)

Need some advise to get this thing running 2133Mhz ... anyone ?

not all hypers play well with sb.

try giving them some more volts (1.7ish)
08-27-2011, 08:46 PM
andressergio

Quote:

Originally Posted by Devil_Dog

Well, I'm loving this board. With my UD7 I was only able to get up to 54x with my chip. The same chip I can get to the Windows logo screen @ 59x.:eek: Don't know if my chip woke up or what but I'm not complaining.:D

damn man congrats !!!
08-27-2011, 08:47 PM
andressergio

Quote:

Originally Posted by Counter CS

Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.

P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.

I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.

I'm starting to think that the problem is my CPU memory controler.

i am using BIOS 3D01_2 (1905)

Need some advise to get this thing running 2133Mhz ... anyone ?

counter 1905 bios ? where is that ?
08-27-2011, 11:11 PM
l0ud_sil3nc3

Quote:

Originally Posted by andressergio

counter 1905 bios ? where is that ?

think he meant 1902
08-27-2011, 11:28 PM
M_T_M

This settings is ok?

http://www.shrani.si/t/1/Vg/2zv5INMy/img0591.jpg
08-27-2011, 11:51 PM
qgshadow

Quote:

Originally Posted by sin0822

whats the best BIOS for the Maximus 4 Gene-Z?

qgshadow, open up the DPC latency checker program, its a free download, see if those programs produce DPC latency spikes. I have had programs that do that random freeze my BFBC2 on MP before.

But even if i monitor.. if the PC locks up, i can't do anything ... :( Hard reboot will reset everything.
08-27-2011, 11:55 PM
M_T_M

Is 1.5V for 5.0ghz ok for 24/7?
08-28-2011, 12:30 AM
Martin.v.r

´MTM
set all speed step to DIS..
08-28-2011, 12:30 AM
owikh84

just noticed that the max VRM frequency on MIVE-Z is 550MHz only in bios 0403
I need higher VRM speed to get lower vcore & avoid BSOD 124
08-28-2011, 03:12 AM
M_T_M

What voltage should change to 5.0ghz? Here are pictures from the BIOS. I have Maximus IV Extreme-Z.

http://www.shrani.si/t/3V/UO/4JGsYot5/img0592.jpg
http://www.shrani.si/t/37/GS/3sciMeA5/img0593.jpg
http://www.shrani.si/t/20/ZU/U3kKTGL/img0594.jpg
http://www.shrani.si/t/1W/bX/4op8gq87/img0595.jpg
http://www.shrani.si/t/1J/z5/1Qg5xYpA/img0596.jpg
08-28-2011, 06:48 AM
andressergio

Quote:

Originally Posted by M_T_M

What voltage should change to 5.0ghz? Here are pictures from the BIOS. I have Maximus IV Extreme-Z.

http://www.shrani.si/t/3V/UO/4JGsYot5/img0592.jpg
http://www.shrani.si/t/37/GS/3sciMeA5/img0593.jpg
http://www.shrani.si/t/20/ZU/U3kKTGL/img0594.jpg
http://www.shrani.si/t/1W/bX/4op8gq87/img0595.jpg

http://www.shrani.si/t/1J/z5/1Qg5xYpA/img0596.jpg

mate i would load EXTREME PROFILE wich gives you a basic OC template we all use mostly and then just put vcore u want

use 75% of LLC
VRM on 350

internal PLL enabled

cheers
Sergio
08-28-2011, 07:30 AM
MonsterDK

Did anyone get any further with this Vcore offset feature, and running a stable setting?
08-28-2011, 07:35 AM
M_T_M

Set this EXTREME PROFILE on YES?
08-28-2011, 08:05 AM
andressergio

Quote:

Originally Posted by MonsterDK

Did anyone get any further with this Vcore offset feature, and running a stable setting?

nope i didnt even try chip is fine with C states on or off

Show 100 post(s) from this thread on one page