Don't ever count on SLI, ever. The drivers for older cards can be modded but NVIDIA encrypted the new ones so you cannot modify them. As to a hardware mod, not oging to happen either.Quote:
Originally Posted by carmatic
Any single graphics card will use the x16 lane.
or dual card tbh i.e. 3870x2 / 9800GX2 (whatever its called)Quote:
Originally Posted by linflas
[edit] just ordered my G.Skill ram :D [/edit]
any single graphics card will use the x16 lane... what do you think of the possibility of using like, having a geforce card as my main graphics card, but sticking a radeon into the second x16 slot, and downloading the drivers to turn it into a PPU ... there has been talk about using a graphics card to do physics, i wonder if its going to be a worthwile use of the second x16 slot...Quote:
Originally Posted by linflas
i've got this ram http://www.ocztechnology.com/product...b_dual_channel , nobody can tell how well its gonna work in the board?
anyne running this and a yorkie, ES especially?
my ES QX9650 runs like a dog (its a known good chip though) on the P35 T2R so thinking of trying this board out.
I am sure they will run great in the x38, I have heard the OCZ & G.SKILL play fine together in the same board ;)Quote:
Originally Posted by carmatic
Praz is running over 1100mhz with the G.SKILL kit on warranted voltage so if you need a start point I am sure he would be the best person to ask.
CN :)
Edit :
1100mhz Screen shot : http://www.xtremesystems.org/forums/...postcount=1061
Bios settings : http://www.xtremesystems.org/forums/...postcount=1063
5 -5-3-15 at 1100mhz , when my reaperx kit is rated 5-5-5-18 at 1000 mhz... looks like a pretty long way ...Quote:
Originally Posted by C-N
Look here: http://www.xtremesystems.org/forums/...postcount=1124
My OCZ ReaperX runs better then the G.Skill :)
With OCZ on Performance Level 6,the G.Skill is hard to run with Performance Level 7.
Same specification as the G.Skill. :)Quote:
Originally Posted by carmatic
No this is a long way http://www.youtube.com/watch?v=mBxZK...eature=relatedQuote:
Originally Posted by carmatic
If you dont try you will never know.
CN :)
now that is a long way :eek:
i saw a side photo in the newspaper the other & that video does'nt do it justise, it a fecking huge jump. proper nutter :nuts:
my mobo does'nt look like its getting delivered today after all, as it 4:30pm already :( . ive got a day off tomoz so im crossing my fingers.
where did you get it from? surely there should be some kind of tracking number?Quote:
Originally Posted by deadman'sclick
The wait will be worth it hang in there bud.Quote:
Originally Posted by deadman'sclick
OT
That jump is the bomb, check the landing absolutely flawless.
You guy's talking about Gskill and OCZ ram's how about Crucial Balllistix Tracer I was going to buy those bc I think they work very well with our board's like I have seen, if anybody could tell me what's really better I would appreciate it :)
just checked the UPS tracking thingy & they have just updated & its now in Barking UK. that was the first update since leaving the deport in Herenboegen on saturday morning 2:00am.
so it should be in a van & on it way tomoz :)
ordering with HPM is'nt a good idea from the UK if u dont have a paypal account & u need what ever it is ure buying quickly.
after all i did a direct transfur @ my bank last monday & the money was taken out the nextday with & agent's charge of 10 euros from the german bank. then nothing goes through with HPM till i get the UPS email on friday.
on top of the 10 euro agents charge i had already payed a charge at my bank to get the money wired quickly lol rather than 4-5days with out a charge :shrug:
just get a paypal account then :D its free...
ill defo be ordering from them again
I just ordered Crucial DDR2 BallistiX TRACER PC8500 2048MB CL5 Kit :D hope they will arrive end of next week.!
this board just loves the ballistixQuote:
Originally Posted by Dede99
Hey again Linflas nice scores :-) x38+quads are great!Quote:
Originally Posted by linflas
How did you get that 860/1200 with your HD 3870? When I try to modify the clocks in ATITOOL they are reseted right back to defaults (stuck).
Did you BIOS mod?
u need to use CCC for mhz and set fan speed in ATT
doing htat mine runs at 877/1377
Well got the board a few days ago after owning the P35-T2R a few monts.
The board take's a bit longer to boot and doesn't handle the 480 FSb the P35 could.
But !
RAM OC is completely sick :shocked:
I can run my 4x 1GB Ballistix PC8500 at DDR1273 on performance level 6 @ 2.36V ! :D
http://xs123.xs.to/xs123/08031/x38_d...280.jpg.xs.jpg
I tested all the beta biosses wich are out but the only one and by far the most stable one is the only official one and 1st release ! :up:
At a FSB of 424 there's no reason why the board shouldn't be able to run at a PL of 6. Adjust Clock Delays and the ram should be able to hit a higher speed.Quote:
Originally Posted by SmokeyTheBandit
looks as if he is running at PL6, praz.
I'm running it on the following settings :Quote:
Originally Posted by Praz
Ch 1&2 = 0-3-8-4
Ch 3&4 = 0-3-8-4
Why has DFI changed the name's of these options btw.
In the new beta's they use the term "XXXps" instead of the normal digits.
The name change more accurately depicts the settings. Since we are changing the signaling time it's best that the actual time delay is displayed.Quote:
Originally Posted by SmokeyTheBandit
Reboot issue? When I restart my comp then it turns first OFF then back on and then OFF again, and after it turns back on and starts up or sometimes it hangs with C1 error on the display. Do you guy's experience the same issue ?