Good question. Running 1200MHz is a non-issue. Doing it with acceptable voltages is the problem.Quote:
Originally Posted by Brother Esau
Good question. Running 1200MHz is a non-issue. Doing it with acceptable voltages is the problem.Quote:
Originally Posted by Brother Esau
Yea, that:eek:Quote:
Originally Posted by Praz
Same here...trying to get the highest core/mem speed at the lowest possible voltages:(Quote:
Originally Posted by Praz
oh yeah sorry the smartguardian reading is quite unreadable isn't it lol.. the ram voltage was 2.4v :DQuote:
Originally Posted by Brother Esau
anyways i'll probably do more ram clocking today /update the bios.. now off to work
Quote:
Originally Posted by Solarfall
Well thats the problem with this ram on the P35 is that you need way too much voltage for 1100mhz you should and so shold I be able to do that on 2.250vdimm:down:
nah not all micron d9 are same.. some need more voltage than overs so your mileage will vary :)Quote:
Originally Posted by Brother Esau
Hey, GeorgeQuote:
Originally Posted by eva2000
Different chipset I know but.....I get 1165mhz 2.3vdimm on 680i
different chipset indeed.. my 2x1GB OCZ PC2-8000 Titanium Alpha on 965P/975X/P35 do only 565mhz 4-4-4-5 at 2.45-2.50v and 585mhz 4-4-4-5 at 2.55-2.6v and cas5 doesn't helpQuote:
Originally Posted by Brother Esau
on Asus 680i striker does 630mhz 5-3-3-x at 2.60v so yes mileage still varies
now my 2x1GB team 6400c3 on 965P/975X/P35 do 570-580mhz 4-4-4-5 at 2.35-2.45v but only 612mhz 5-3-3-x on 680i heh
does clockgen work on this board and if so which PLL?
same clockgen as asus commando > http://i4memory.com/reviewimages/mot...35_T2R_27.html :)
thanks mate but just tried CY28551 and its not reading correct cpu speed or FSB.:confused:Quote:
Originally Posted by eva2000
use setFSB not clockgen ;)
ah i see. ok getting now. thanks again George.;)Quote:
Originally Posted by eva2000
edit: how do you run it? when i try to run setfsb.exe I get "sysinfor(x64).sys Error" lol what a n00b. :p:
Hi guys,
i finally received my Q6600 which should be able to do about 3,8 Ghz.
Any hints on how to start in Bios and work my way through ?
I know each cpu is different but a few hints would be awesome, since this GTL thing is new to (it's my first quad :) )
thx in advance
using latest setfsb ? maybe vista 64bit issue ??Quote:
Originally Posted by pumbertot
hey guys what bios version are you using .. is the newest version any good ???
09/13 seems to be the best overall for me.
Same here 09/13:up:
Quote:
Originally Posted by Praz
alrighty then.. I'll give it a go :up:Quote:
Originally Posted by Brother Esau
sorry if this question has been asked...but in the BIOS settings > DRAM Timing > Enhance Data transmitting... what does Turbo do?:confused:
Look at the dfi 09/13/07 Bios template and it will tell you. You need really high NBV to run @ Turbo
Thanks!:DQuote:
Originally Posted by Brother Esau
I read a few pages of the beginning of this thread and it seems there is a problem with a sqealing or whizzling noise if cpu is loaded, is there any possibility to solve this ? It`s really annoying since i leace my sidepanel open :)
Other question, can you flash the Bios to the new one without problems or did someone got a dead mobo with post code 88 like on the nf 680i board ??
Quote:
Originally Posted by ic3m4n2005
No squeeling or whining going on here, I did at first till I changed the PSU, but now its all silent.
p.s. I have had post code 88 a couple of times when ive set bad bios settings ie: RAM speed, timmings, voltages etc, but a quick clear CMOS and pulling all my sticks of RAM but 1 while I rectify the problem has always cured that.
No squeeling here either.... nice and quiet at 4GHz