Printable View
I just got a wild idea! I dont know if this has been said before or if anyone cares lol but I think why not many people are receiving good 512 MB that are AA4t is that the chips are being used by OCZ! and this is why OCZ doesnt use 2x256 mb chips! and these Vx capable chips are being buried in cheap ram and rated 2.5...after all VX is rated 2.5 untill its given 3V and up right... just my 2 cents :)
lol all the IC's are 32mb, the 256 sticks are 32x8, and the 512's are 32x16.
the ic's are all exactly the same.
hmmm..well I stand corrected then :p ...I think :confused: lolQuote:
Originally Posted by Revv23
All sticks were TwinMOS 50D labeled (Winbond UTT chips) 2*512 Kits marketed by Twinmos as CL 2.5 (2.5-3-3-8 SPD) with PCB's labeled KO 6633.They were bought in B&M store in my country, Romania that is. Next week i'll try 2 more.
I'm pretty curious if the -44D IC's are any better.
Exactly my thought ... maybe the Brainpower PCB isnt that good when used with Winbond UTT chips ... that's maybe the reason Twinmoss hasnt implemented it in their design on the AA4T chips.Quote:
Originally Posted by Rabbi_NZ
Brainpower is a good PCB design when used with Samsung TCCD but not with these chips maybe ...
However I could be totally wrong about this ....LOL
:p:
pffffffff
what good is brainpower PCB if you don't have the chips for it? :(
I have 2 bars with Brainpower, but without the dotted, or AA4T chips and it's 50B instead of D.
Can anyone say what I can expect from these sticks? :s
I don't expect a lot of them right now but as they appear to be acapable of riunning 7-3-3-2.5 on 2.6 volts here they have outperformed my Apacer ont imings(but bandwith dropped with about 50MB( But i do have a gig of them (2x512) isntead of only 1x512Apacer ram)
Could they be capable of running a decent 420? :s
I hope so..... Then at least I'll get SOMETHING out of these sticks.... Dam I wanted those winbond chips.... But the problem is, no one in belgium appears to be selling speed premiums :confused:
Otherways I would've gotten speed premium off course
It's not that I think the BrainPower are bad... it's just that I dont think they are that great... max overclocks seem to be bout the same on either PCB varient.Quote:
Originally Posted by Daytime Dreamer
PS: Dude! Dont be suprised if people dont respond to your posts for a while after you write them.... that ass in your avatar is sooo sweeeeeet it tends to divert the eye
ok, i will go now to see if i have luck or not. Wish me luck! :D
yap, that's it! same here! ;)Quote:
Originally Posted by Jeff
LOl
ok I got BP PCB for sure.
On the topside of my PCB there is something with a B6 something but the end is 808 so it matches the versions I've seen on other fora and here.
Supprisingly, the Twinmos isn't as bad as I thought.... It's running 410 with 7-3-3-2.5 and I haven't tested it further because if I don't give it enough volts or soemthing I have to reset bios and I don't feel in the mood for doing that :)
So whats the big difference between the Non Speed premium and the Speed premium ?Quote:
Originally Posted by The Stilt
The labels ? :D
Got pm. :)
Who knows.
My RAm bars (non speed premium) with BP PCB's run 7-3-3-2.5 on 2.6VOLTs 203 MHZ ..... that beats my Apacer hands down which couldn't even run 7-3-3-2.5 on 200MHZ LOL
Could you guy's give me a quick test to see what these chips are worth? like if I cna set it to ...... at ... speed it should be relativly ok, meaning i'm not gonna reach 250MHZ or something but I'll still get a decent .... mhz or something :p
BTW
You know those side"marks" on the winbonds?
I have those 2x2 little metal dots or pins also. Maybe wishfull thinking but if you'd just add the 2 "holes"/dots on the top of the IC package it'd look identical to winbonds....
As I said wishfull thinking but those 2x2 dots on each side are on the excact same side as on the winbond IC's.
Is this purely luck (same machine used or something) or is this also one of those trademarks for a certain maker or something?
Well I'm going back to burning those things in here and looking what they can do
The two metal dots can be found on other manufacturers' IC's too. eg TCCD
Yhea samsung has them also, I know, I looked at my samsung memory (TCCC) and it has the 2x2 dots also, but its dots are closer together and closer to the center.
like this (the "-" is to space things out because with normal spaces ithe picture is a bit screwed up )
|-----.-.----.-.-----|
and with me its like this:
|---.--.------.--.---|
the dots themselves are farther apart and more to the outside edge of the chips
has anybody tested the winbond utt chips @ 2,9V?
or could anybody be so kind? :D
here you go :Quote:
Originally Posted by Jack
http://img.photobucket.com/albums/v5...29v_1GB_pi.png
cannot higher than that - LOL
Sweet screenie setyotomo, lol. :worship: :ROTF:
tnx man :toast:Quote:
Originally Posted by setyotomo
Yeah, I havent seen that great of an FSB on brainpower PCB at 2-2-2-x timings ... ok maybe a very rare few cases but thats all.Quote:
Originally Posted by Rabbi_NZ
Yeah, it was voted a** of the year 2004 :banana: :banana: We can all see why!
On to the topic (LOL). I went today and bought another 2gigs of the AA4T stuff ... but that was the last of 50 sticks! That reseller had 50 sticks 2 days ago and now none ...word must be out I guess. He will have a new bunch of Twinmoss sticks coming in ... lets hope its the AA4T stuff ...
for low voltage maniac : :D :D
http://img.photobucket.com/albums/v5...prime_3hrs.png
another one :
comparison with OCZ VX specs : with 2.6v :lol: do you think they used EXACTLY the same chips?
http://img.photobucket.com/albums/v5..._vs_VX_LoL.jpg
sorry if i already post this earlier :) :banana3:
So TheStilt, you selling your AA4T's???
I'm not looking forward to having to try buying another set of 2x512....
Quote:
Originally Posted by Daytime Dreamer
"Yeah, I havent seen that great of an FSB on brainpower PCB at 2-2-2-x timings ... ok maybe a very rare few cases but thats all."
Well you know that Brainpower PCB's have been around Longer than you
think...My EB 3500 is BP808 and so are All the EB sticks...
Maybe you should "Rethink" that statement your makeing ;)
So you saying all his sticks are cheap "OCZ VX" ?Quote:
Originally Posted by Daytime Dreamer
You told me in PM that they're not SPEED PREMIUM tho....cany ou get any pictures ? :toast:
oh oh... i see prices going up! :stick: