Wow Uber, that's really sick! :slobber:
If you can take a screenie @360, you should be able to run benches @ at least 340, no?
Printable View
Wow Uber, that's really sick! :slobber:
If you can take a screenie @360, you should be able to run benches @ at least 340, no?
I think so but its CPC off so benches sux.
Will the board be able to handle 3x512MB Crucial Ballistix at DDR400 or will they run DDR333 like most other boards?
forgot to add my highest HTT speed achieved hehe
http://www.fileshosts.com/AMD/DFI/60...5-1.7/cpuz.jpg
http://www.fileshosts.com/AMD/DFI/60...7/mem-buff.jpg
http://www.fileshosts.com/AMD/DFI/60...1.7/pifast.jpg
any higher than 372HTT won't boot pc
heheh :D
nice george :toast:
what was the highest 1:1 you could get?
with 2-2-2-6 timings best 1:1 is 270mhz at 3.52-3.56v
http://www.fileshosts.com/AMD/DFI/60...uperpi-32m.jpg
:D
i'll try some other ram i have to see what more loose timings do :)
pretty nice eva.. MY EB does 265 2.5-2-2-0 1:1 i have a bh-5 stick i need to test altho..
Whats the highest 3v you guys run? i have a ocz 520w, and it goes from like 3.4 to 3.7 with a Slight touch..
Hey guys i'm trying to figure out what to set the tref at in the bios. What would this be in the bios ?
just leave it alone ;)Quote:
Originally Posted by Klisp
EVA2000: What is your secret reaching 372MHZ :slobber: with a NC.
What are your settings in the bios??
This is my max. (HTT=AUTO) 1/2 devider.
http://www.xs4all.nl/~famchow/A64_34...320MHz_HTT.JPG
Is ther many that has prob running this board whit EB memory?
Whit my PC3700 EB stick it only bootes 1 og 10 times.
Have to clear cmos often and start the board whit a pc2100 twinmos chip.
Quote:
Originally Posted by Fosco
have u tried the latest bios or the beta one?
Has anyone used an aftermarket chipset cooler on this board with a 6800 ultra? It looks to me like the ultra overhangs the chipset too much.
I can't hit 2.4 stable no matter what I do. I hit it stable with my friends GEIL memory. But with my RAM which is Infineon PC3200 512 I can not no matter what settings I do and how much voltage I run to it. I always end up getting a memory dump error. I am trying this with only one stick in as well.
And to ask another thing. What does it mean when you get the "Detecting Array" message? I know it doesn't like the setting when that comes up but does anyone know why exactly it comes up?
*EDIT* Has anyone figured out settings for MBM or do they know of any support for it that is coming soon? I do not like this program that came with it. MBM is the sh*t and I really want to use it on this board.
Yea, its a known prob. Youre going to have to go with a 1u chipset cooler or something with that long video card. You could use one of those copper iceberg thingies, its not very tall but it doesnt cool as good as the Swifty unit.Quote:
Originally Posted by chunkylover77
"I can't hit 2.4 stable no matter what I do. I hit it stable with my friends GEIL memory. But with my RAM which is Infineon PC3200 512 I can not no matter what settings I do and how much voltage I run to it. I always end up getting a memory dump error. I am trying this with only one stick in as well."
"And to ask another thing. What does it mean when you get the "Detecting Array" message? I know it doesn't like the setting when that comes up but does anyone know why exactly it comes up?"
"*EDIT* Has anyone figured out settings for MBM or do they know of any support for it that is coming soon? I do not like this program that came with it. MBM is the sh*t and I really want to use it on this board."
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
lets take them one at a time.
first, your problem is your ram obviously, so for you to get what you want, you need different ramski, plus each cpu clocks differently, although that 3200 should be getting 2400 easy, prolly some more in her..........
second, go into bios and start figuring some stuffs out, once you disable raid in the bios, it will go away.......shakes head, muttering.............
third, as far as MBM, big deal, the proggie that comes with the board works and gives some nice info, i am sure MBM will comes up with some changes, just hasn't happened yet, sorry to dissappoint you................but they will move at their own speed, not yours.
and to finish, i have had excellent results with my board, only problem so far is getting the OCZ ram booster to work properly.................sorry to hear of your problems, all of them are solvable......................
running 7.5x326, ram @244 (PC3500, BH-5 stuffs), this is with a 2800+ unit, and with the stock cooler so far.
baldy :D
RAID is disabled...it does it when the CPU hangs up. And I have decided to order some OCZ EL Plat Rev. 2 RAM. Hoping when I get that it will recieve some pretty nice clocks. I am hoping to get atleast DDR550 with 512x2. But I have also hit 2.4 stable with a stick of a friends RAM. So that solves that lol Only thing that sucks is that I need to wait until my paycheck deposits in wednesday because I don't want my bank account to go too low. So until then I am stuck with this sh*ty memory lol
"RAID is disabled...it does it when the CPU hangs up."
>>>>>>>>>>>>>>>>>>>>>>>>>>
in the post i replied to.
yes, it will show up when clocking and the board or whatever balks, it has happened with mine when really pushing everything to find limits.
baldy :cool:
You could always put a CPU cooler on the vid card. I have an old Alpha cut down to fit my X800, and my Swifty NB cooler fits. You just wanna be careful puttin in the vid card, it is a close fit. ;)Quote:
Originally Posted by chunkylover77
you can also download the modded BIOS, you can take it up to 4v supposedly if your rail can go that high . I'm running 3.4v in my BH-5, my PCP&C can adjust to 3.65vQuote:
and to finish, i have had excellent results with my board, only problem so far is getting the OCZ ram booster to work properly
:stick:
Bios settings were 1:2 divider ram at 2226 1T with LDT = AUTO and everything else AUTO with vdimm = 3.46v and chipset = 1.7vQuote:
Originally Posted by kakaroto
it won't boot at 373HTT
btw for folks who seem to experience the boost screen hanging before drive detecting, all you need to do is press any keyboard once and it will quickly continue to boot :)
I got 3 of the DFI boards 2 days ago. I just loaded them up last night. Im using my DDR booster on one of them 3.7v, my good BH5 PC3500 hyperx which maxes out @ 265 1:1 222 in every other board makes it to 275 in the dfi.
Where's the 4v dfi bios so i dont have to seach the hell out of this thread, Someone send it to me @ tedinde@xtremesystems.org if you would. Thanks in advance.
Im using my newcastle chip in it. and runs @# 350htt no problem.
Quote:
Originally Posted by Tedinde
http://www.ocforums.com/showthread.php?t=328318
Put your chipset back at v1.6, From my testing and what I am reading the board will sometimes not work with an overclock at higher voltage ratings. Put your CPU at v1.55 and that is fine as well if you haven't already done so. Although you do have a NC right? And it doesn't ever hang on my IDE drive detecting. It just sometimes shows the "Detecting Array".Quote:
Originally Posted by eva2000
'Quote:
Originally Posted by Klisp
Try set it to 166 instead of 200.
Maked some hundred megs in sandra ones i checked it.
But this depends on speed and other settings in bios i guess.