Printable View
Anyone using GSkill PC-6400 HZ (F2-6400PHU2-2GBHZ) with this board?
My question is what memory settings you are using, maybe if you could give me a picture of the BIOS screen. I only set the first 4 options to 4-4-4-12 but the rest is on auto. I'm not sure if this is the best idea or not. Does it matter?
Thanks in advance
im at 1000mhz with 5-4-4-12, with 2.3v.Quote:
Originally Posted by Dredd
do the rest of the settings matter?Quote:
Originally Posted by GAR
I have it running now at DDR2-1020 5-4-4-12 1T 2.25v
This seems to be the best I can do with this setup.
These sticks all obviously vary.
Mine will do about 1050mhz 4-4-4-12 with 2.3v. That's with fans over them.
Looking through the gskill forum, the only real mention of further sub timings are in conjuntion with Asus P5b Deluxe. As follows 4-4-4-12-4-42-3-11-7-13
(Edit: The order is different to the Abit's bios, and in fact may not work anyway. Here's a screengrab just for reference where the settings have been set as 10-10-10-10 instead of 3-11-7-13 http://www.gskillusa.com/motherboard..._2gbhz_002.jpg)
If you have the memory set to auto, you could run memset to see what timings are being set.
RLM
Well, I'l trying to keep the voltage under 2.3. I've already limited myself that much. I guess DDR2-1020 5-4-4-12 is good at 2.25Quote:
Originally Posted by RLM
Sounds good Ace-a-Rue and shimmishim, except shimmishim - you gotta be joking right? What's the point with GLAN on PCI? It would saturate/choke the bus COMPLETELY. Are you sure? Both of them can't seriously be?
And where can I find more on this vmod? :D
I think IP35 Pro may very well be my next MB afterall.
Have you used a gigabit network? You never see max bandwidth used in day to day situations.Quote:
Originally Posted by krille
Dredd , have you tried memtest, does it pass with 1t @ 1020????? mine passed memtest for about 15 mins then i got an error.
So I managed to screw up my bios flash and now the motherboard won't boot or display anything, it powers on but does not boot, is there a bios recovery method without having to get a new chip or do I need to contact abit and get chip.
if you can put the bios chip into another abit board and then hot flash it, that is about the only way i know of.
Quote:
Originally Posted by krille
as far as the PCI bus working with the network chipset, i have not seen any sluggishness or other variant when using high speed cable connection...of course, i do not have any PCI cards plugged into the PCI slots....maybe when there is a PCI sound card or something else in the PCI slot, a problem might come up.
just looked it up... Glan runs off of the pci bus :(Quote:
Originally Posted by krille
both of them!
vmods... so far only vdroop has been found...
http://www.xtremesystems.org/forums/...d.php?t=152233
i haven't seen the vmem mod or vdimm yet
Quote:
Originally Posted by krille
here is the mod:
http://ocxtreme.org/forumenus/showpo...5&postcount=45
Real interested in seeing the finished mod. Pics anyone?:)
Quote:
Originally Posted by Ace-a-Rue
Looks like I get to go to fry's and pick up a new board when I get off work, I don't want to wait to get a bios chip shipped.
Yup, im about to go to frys today as well, i love that place, only 3 miles away from me :p:Quote:
Originally Posted by Hey_Its_Cole
newegg is my fry's...LOL
Really for me to, but fry's is my back up when I need stuffQuote:
Originally Posted by Ace-a-Rue
quick.
Why Intel TAT doesn't work with this mobo?
use coretemp 094 or 095 for temp readout
Stupid question, I should have any problems after I install a new motherboard right? I just put it in and it is back to normal??
Core temp 0.94 or 0.95 doesn't work.
memtest in DOS or windows? cause in dos is passed but windows no pass. I just turned it back down to 850. It's ok for me.Quote:
Originally Posted by GAR
I run a X-FI in there with my LAN going and no problems.Quote:
Originally Posted by Ace-a-Rue
Like I said day to day you'll never see the difference anyway.
here is my highest FSB so far.
http://img504.imageshack.us/img504/8552/530fsbpi5.jpg