just testing P35 for 10xx
only mild tweak, windows not tweaked much.... still have some mhz to cut, too bad i have to return the mobo :(
http://img.techpowerup.org/070624/1058%204486372.jpg
Printable View
just testing P35 for 10xx
only mild tweak, windows not tweaked much.... still have some mhz to cut, too bad i have to return the mobo :(
http://img.techpowerup.org/070624/1058%204486372.jpg
Thanks Oldscarface. Amazing ram speed.
Woot! One for the home team, 965 still lives. :D WTG oldscarface.
Entry 15.xx
Testing out the new board.... not used to running high mhz on rams ( for me lol ) ......
http://www3.telus.net/luis99/15.xx1.JPG
nice clocks! what bios settings did you use for commando ? i can't get any memory past 600-620+mhz stable with commando and 1001 biosQuote:
Originally Posted by Oldscarface
if you could provide the settings used with this template would appreciate it alot :)
Bios Template:
thanks :)Quote:
Extreme Tweaker:
AI Tuning: Manual
CPU Frequency:
DRAM Frequency: DDR2-533MHz (1:1 Divider), DDR2-667MHz (4:5 Divider), DDR2-800MHz (2:3 Divider), DDR2-889MHz (3:5 Divider), DDR2-1066MHz (1:2 Divider)
PCI Express Frequency: 100
PCI Clock Synchronisation: 33.33
Spread Spectrum: Disabled
CPU Vcore Voltage: Auto
FSB Termination Voltage: Auto
NB Vcore: Auto
Memory Voltage: 2.00v
DDRII Channel A REF Voltage: Auto
DDRII Channel B REF Voltage: Auto
DDRII Controller REF Voltage: Auto
SB Vcore (SATA, PCIE): Auto
SB Chipset Voltage: Auto
Asus C.G.I.: Disabled
Static Read Control: Disabled
Configure DRAM Timing by SPD: Disabled
- DRAM CAS# Latency: 4
- DRAM RAS# to CAS# Delay: 4
- DRAM RAS# Precharge: 4
- DRAM RAS# Activate to Precharge: 12
- DRAM Write Recovery Time: 6
- DRAM TRFC: 42
- DRAM TRRD: 10
- Rank Write to Read Delay: 10
- Read to Precharge Delay: 10
- Write to Precharge Delay: 10
Legacy USB Support: Disabled
CPU Configuration
Modify Ratio Support: Enabled
- Ratio CMOS Setting: 11x
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM function: Disabled
Execute Disable Bit: Disabled
PECI: Enabled
Gautam, I believe this is for now the max for my system.Quote:
Originally Posted by Gautam
I have tried every tweak I know to get this result.
But for the 12,xx and 13,xx catagory it is still not enough :mad: but I will keep on trying.
Perhaps we can joint our forces to beat the P35-clan :D
eva2000 :Quote:
Originally Posted by eva2000
First off all I'am still using bios 0803 :
Which memdivider do you use?
And what is your mem voltage?
Memdivider 2/3 is absoluut the best for this board.
Memdivider 4/5 does not work propperly, but most P965 board have that problem.
But here are my settings from the bios, I hope it will help you.
Extreme Tweaker:
AI Tuning: Manual
CPU Frequency: boot with FSB 400Mhz, in windows with SetFSB to 420Mhz and apply, then to 439Mhz and apply.
DRAM Frequency: DDR2-800MHz (2:3 Divider) = 1200Mhz @ boot and 1317 @ FSB 439Mhz
PCI Express Frequency: 100
PCI Clock Synchronisation: 33.33
Spread Spectrum: Disabled
CPU Vcore Voltage: 1,5875V
FSB Termination Voltage: Auto
NB Vcore: Auto
Memory Voltage: 2.625V (2,600V also works)
DDRII Channel A REF Voltage: Auto
DDRII Channel B REF Voltage: Auto
DDRII Controller REF Voltage: Auto
SB Vcore (SATA, PCIE): Auto
SB Chipset Voltage: Auto
Asus C.G.I.: Disabled
Static Read Control: Disabled
Configure DRAM Timing by SPD: Disabled
- DRAM CAS# Latency: 5
- DRAM RAS# to CAS# Delay: 5 => In windows with Memset I change the Write Delay to 4.
- DRAM RAS# Precharge: 5 => In windows with Memset I change it till 4
- DRAM RAS# Activate to Precharge: 5
- DRAM Write Recovery Time: 5
- DRAM TRFC: 35 => In windows with Memset I change 25
- DRAM TRRD: 3
- Rank Write to Read Delay: 10
- Read to Precharge Delay: 5
- Write to Precharge Delay: 10
Legacy USB Support: Disabled
CPU Configuration
Modify Ratio Support: Enabled
- Ratio CMOS Setting: 9x
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled
Best 32M bencher we have here in our little country, klasse :up:
14XX Category
ah.... soo close to you oldscareface.... too bad i have to return this memory..
im trying for 11xx category but my ram wont stable... my room is too hot, the spreader is getting warm...
http://img.techpowerup.org/070625/14xx.png
Thanks (bedankt) loc.oQuote:
Originally Posted by loc.o
Yeah indeed, so close.Quote:
Originally Posted by andre X_X
I could be that if you make another run, you will have it.
Try to lower the tRFC to 21-23, that can make the difference.
(if you can keep the mems a little bit longer)
this is my entry for 15xx
not to good
http://img.techpowerup.org/070626/15xx.png
Yeeessssss....... Finally made 12.xx under 3600mhz:D Probably not a big deal now with the P35 boards but Im still so happy:D .... It was on the first run too at this speed with this board and mems, just wanted to see how far Ill be to 13m lol.....
Abit IP35
Ballistix 8500.....
12.xx entry...
http://www3.telus.net/luis99/3598.JPG
Very very good run bro. Definitely the best I've seen on 7x 1:1.
Great;)
What is the max fsb for Abit?
Thanks .....
Gautam, THis run was using 5:6 divider not 1:1.... @ 1:1 I think my best was 13m08s, a couple of ticks slower than the 965-s..... This new divider is awesome cos its easy to run, I cant run the 4:5 divider on this board past 470fsb.....
Over@locker, highest I ran 32m is around 540fsb... my cpu has fsb wall at around 552fsb so I didnt really try to much after running 540fsb.... I think its my cpu thats limiting and not the board.... This boaord is pretty fast though cos I never had to use the PL on memset...
whoops
nice run bro.. :)Quote:
Originally Posted by luihed
congrats on the sub 13m - sub 3600MHz luihed!Quote:
Originally Posted by luihed
and thanks for the info on the IP35. after the death of my QuadGT i am up in the air of whether or not to buy another QuadGT to replace it and continue on my fight for sub 10m - sub 5GHz with the E6600 (AKA 555x9)...or if i should switch to the DFI 965-S...or if one of the new P35s is the right choice such as the IP35.
your comments on the 514x7 1:1 really have me thinking this IP35 isn't that far behind the 965-s and the QuadGT. my best on the QuadGT 514x7 1:1 is 13m 03.xxx so likely just a couple ticks faster than the 965-s which in turn is just a couple ticks faster than this IP35. the big advantage for the IP35 is the memory clocking ability and the FSB over the QuadGT...the 965-S is still a tough choice to turn down for my purpose. i should just buy all three and have a showdown but i have bought faaaaaar too many motherboards already this year :)
Thanks er and 3oh6....
I was surprised myself on how close this board was at 1:1 to the 965-s....my best with the 965-s was 13.06 with 4-4-3-4, but my normal time is 13.09 (4-4-4-4) at 514.3fsb (3600), with this board I was hitting 13.11 (4-4-4-4) but at only 3598mhz cos setfsb will never work on this board.....
Instead of buying 3 boards, just buy this and get 2 more sets of rams:D People say that at 500fsb+ this board is at 1333strap, thats bullsh!!t cos only 1066strap can run this fast.... Also like I said before, I never had to play with the performance level in memset cos its always at the lowest level possible:) .....
Funny thing is that run I did was just a test to see where this board is at lol.... You guys will do some damage with this board, I think in the right hands and using 4:5 divider 12.3x is possible......
Congrats luihed on your 12.xx.
Entry for 16.xx
http://img215.imageshack.us/img215/8...erf7ok6.th.png
for the 12.xx category
dfi 965-s
update for 19.xx timezone with PL5
http://img502.imageshack.us/img502/796/19mpl5wx6.th.png
entry for 13.xx
http://img502.imageshack.us/img502/2471/13mxp3.th.png
update for 13.xxx category
water-cooling
CPU:E6600
Mem:Team Xteem PC2-6400
MAXMEM=555
http://homepage2.nifty.com/NewBeetle...34_3300MHz.png