I will give it a shot ty.
Printable View
I will give it a shot ty.
i know i posted this b4 but no one answered me :confused:Quote:
Originally Posted by Ket
if i go back to default in my bios it boots at 266 FSB and not the 333 FSB.
on the OCing side of it, i got 4 GHz stable:yepp: tho i cant get the vcore any lower then 1.4 in windose. (this is my first time at overclocking) At 3.825 GHz my vcore is 1.29/1.30 in windose.
ill post my settings for 4 GHz tonight when i get home
hi guys: any suggestions to my bios settings??
cheersQuote:
3.60ghz @ 1.38125v BIOS ***currently testing with prime95*** oct 18/08 9:30am est.
using the asus p5q pro stock bios 1106, with G.SKILL F2-8000CL5D-4GBPQ PC2-8000 4GB ram
FSB frequency ==============> 300 x 12
pci frequency 100
FSB strap to northbridge auto
DR ram freq < 800 mhz >
DR ram timing control manual settings
***
DRRAM Timing Control [Manual]
CAS# Latency [5]
DRAM RAS# to CAS# Delay [5]
DRAM RAS# Precharge [5]
DRAM RAS# Activate to Precha [15]
RAS# to RAS# Delay [5] <--Auto is on 3, too tight
Row Refresh Cycle Time [45]
Read to Precharge time = _____________??? value is 1 to 15
DRRAM Static Read Control [Disabled]
DRRAM Read Training [Disabled]
MEM Overclocking Charger [Auto]
AI Clock Twister [Lightest]
AI Transaction Booster [Manual]
Common Performance Level: [9] <---7~8 maybe possible???
Pull-In of CHA PH1: DISABLED
Pull-In of CHA PH2: DISABLED
Pull-In of CHA PH3: DISABLED
Pull-In of CHA PH4: DISABLED
Pull-In of CHB PH1: DISABLED
Pull-In of CHB PH2: DISABLED
Pull-In of CHB PH3: DISABLED
Pull-In of CHB PH4: DISABLED
=========================================
***
DR ram static read control disabled
DR ram read training disabled
MEM overclocking charger auto
AI clock twister lighter
AI transaction booster manual performance level = 9 settings
======================
cpu voltage 1.375v >>> 1.38125v
cpu gtl return .61x
cpu pll voltage 1.54
FSB termination 1.34
DR ram voltage 2.14* want to go lower tho ram is rated 2.1v
NB voltage 1.36 >>>>1.40v
SB voltage 1.20
pcie sata voltage auto
==================
load line calibration
cpu spread sprectrum
pci spread strectrum all disabled
cpu clock skew auto
NB clock skew auto
cpu margin enhancement optimize
===================
in Advance CPU settings:
CPU ratio is 12x
C1E support disable
max CPUID value limit disable
CPU TM function disable
Execute Disable Bit disable
Intel speedsteptech disable
intel C-stateTech disable
=========================
Thanks for the new modded Bios
i will Try the P5Q Pro one.
I made also an mirror on Rapidshare
Here the link for you
http://rapidshare.com/files/15527935...06_mBIOSes.rar
Feichti
what is your other bios setting ?Quote:
Originally Posted by CandymanCan
it looks cool , your cpu voltage is pretty low :)
guys: true or false.... disabling the USB legacy supports helps to prevent RAM/BSOD errors in vista with asus mobos???? i read that on another forum
Quote:
With 4 modules I would suggest setting the memory frequency at DDR667 and set the memory Voltage to 2.0 Volts and set the NB/MCH/SPP Voltage to +.05 Volts as well and test the system with www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
__________________
im using 2 instances of memtest v3.01 to test my ram in vista
http://i33.tinypic.com/2ic410l.jpg
OT: is overclock.net down right now? 1am est time oct 19th
Why is your lan box more powerful than your gaming pc? :p:Quote:
Originally Posted by XLAR8
Anybody know where do the vdrop pencil mod on P5Q-E
or is not yet known
there is no need for this mod on itQuote:
Originally Posted by Darknight
the voltage drop is very low
in 500 fsb or above ,Quote:
Originally Posted by CandymanCan
how much do you need to add voltage for PLL and NB?
do they stay in stock ?
because my stupid striker has a voltage reg problem and keeps blowing up and so i cant ever get to finish building it :mad: lolQuote:
Originally Posted by Ket
my original gamer is even slower lol its
AMD 6000
m2n-sli
corsair xms2 800 MHz
X-fi xtream audio
2 x 250GB Seagates in Raid o
2 x 8800GT's overclocked
Give up on the gamer and use your lan box as the powerhouse? :p:
Well I have been gone for a little bit of time now 24hrs lol. I figured I would post a pic of what I was doing. I was cutting holes in my case so I could tuck my cables out of the way better and to get better air flow. Here is what it looks like. I know the video card is bending a little but, it will be ok I'm sure. I actually lost my Keyboard and Mouse in this process "the USB wireless controller broke" and my spot cool broke as well.
http://img114.imageshack.us/img114/2010/nowiresyw7.jpg
Not looking too bad in there :up: That nest of cables at the bottom could do with some zipties tho :p:
They are all going into a hole I put there to run the cables out and around the back of the case :p:. I do need to tidy it up a little if possible. Though it's probably not going to be very much, and I need to move that one stray fan wire at the top left, that thing is irritating. :p:
Not quite bigger then the power supply but, I will never have to fill water or worry about a leak and they happen eventually unless you tend to it enough to actually catch it before it can do damage I guess but, still I would rather not have to worry about it TBH.Quote:
Originally Posted by CandymanCan
I still like air better, its easier to move a system using air than it is one thats using water.
Exactly I just don't like the extra work that comes with it I'm sorry.
:D
haha if weight is problem whit coolers
http://img293.imageshack.us/img293/8489/lolje8.th.jpghttp://img293.imageshack.us/images/thpix.gif
:rofl:Quote:
Originally Posted by carepolice
True,