Here are my settings:
Extreme Tweaker
Ai Overclock Tuner: Manual
OC From CPU Level Up: Disable
Ratio CMOS Setting: 9
FSB Frequency: 434
CPU Clock Skew: Auto
NB Clock Skew: Auto
FSB Strap to North Bridge: 266
DRAM Frequency: 1088
DRAM CLK Skew on Channel A1: Auto
DRAM CLK Skew on Channel A2: Auto
DRAM CLK Skew on Channel B1: Auto
DRAM CLK Skew on Channel B2: Auto
DRAM Timing Control: Manual
1st Information:
CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge:
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay: 3
Row Refresh Recycle Time: 55
Write Recovery Time: 6
Read to Precharge Time: 3
2nd Information:
Read to Write Delay (S/D): 8
Write to Read Delay (S): 3
Write to Read Delay (D): 5
Read to Read Delay (S): 4
Read to Read Delay (D): 6
Write to Write Delay (S): 4
Write to Write Delay (D): 6
3rd Information:
Write to PRE Delay: 14
Read to PRE Delay: 5
PRE to PRE Delay: 1
All PRE to ACT Delay: 6
All PRE to REF Delay: 6
DRAM Static Read Control: Disable
DRAM Read Training: Disable
MEM. OC Charger: Enable
Ai Clock Twister: Auto
Ai Transaction Booster: Auto
PCIE Frequency: 100
CPU Voltage: 1.22 (1.225)
CPU PLL Voltage: 1.55 (1.553)
FSB Termination Voltage: 1.32 (1.3525)
DRAM Voltage: 2.1 (2.10475)
North Bridge Voltage: 1.32 (1.32525)
South Bridge 1.5 Voltage: 1.55 (1.553)
South Bridge 1.1 Voltage: 1.15 (1.153)
CPU GTL Reference (0): +20
CPU GTL Reference (1):-20
CPU GTL Reference (2): +20
CPU GTL Reference (3):-20
NB GTL Reference: +10
DDR2 ChA Reference Voltage: Auto
DDR2 ChB Reference Voltage: Auto
North Bridge DDR Reference: Auto
CPU Configuration: All Disabled
Load-Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
