UNOFFICIAL BIOSTAR TPower I45 M/B

Printable View

Show 100 post(s) from this thread on one page

10-10-2008, 08:04 PM
Pcuser

Quote:

Originally Posted by Ace-a-Rue

board to board can bring BIG differences on memory performance and top tier memory speed....never think that a different board will give you equal performance....i found this board did BETTER with my corsair dominator memory than it did on my previous ddr2 boards.

Good point:up:
10-11-2008, 10:52 AM
BababooeyHTJ

I just started overclocking my board and the huge incements in voltages are really limiting my overclock. I also dont like not being able to fine tune the gtl refs. If it wasnt for that this would be a great board. It overclocks really well.
10-12-2008, 11:40 AM
BababooeyHTJ

Is there any ram that is proven to work well with this board? I cant get my 1066mhz reapers stable at 1068mhz 5-5-5-15 or at 890mhz 4-4-4-12. Ive had good luck with these sticks on other boards. I need to play with the PLs alittle more. The latency for my L2 cache is also very high on this board. Its small fft stable for 14.5 hours (I stopped it then). I cant figure this board out, between the memory clocking and the HUGE increments in voltage Im pretty disappointed with this board. Seems like a pretty crappy board for day to day use. Also, whats up with there being all of these issues and no bios update for 3 monthes, not even a beta? Did Biostar abandon this board? They made alot of money with it a little bios support would be nice.
10-12-2008, 02:27 PM
Ket

Drop them an email asking about finer voltage granularity and much better memory support. Don't use the word overclocking or you will be fobbed off, standard practice of any manufacturer.
10-12-2008, 02:54 PM
BababooeyHTJ

I already did, but I dont rememer if I mentioned overclocking. I dont think I did. I think everyone here should do the same thing. Hopefully we can get a beta out of them. I know there is only so much that you can do, Ket. I still cant wait to try out a modded bios.
10-12-2008, 02:55 PM
Marcam923

You would think since they have the Oc'ing guide to get you to 600FSB, that Oc'ing wouldn't be that much of an issue for them...
10-12-2008, 03:05 PM
Ket

Biostar probably do have some decent betas kicking about, their just taking their sweet time in making one of them official. Keep bugging them ;)
10-13-2008, 07:13 PM
keatlck

Running 4GHz last night. look like the temp is quite high. It can be running 24/7? Temp can acheived 69C. vcore at 1.424v.
(Running at 3.866 only 63C at vcore 1.320v)

http://img76.imageshack.us/img76/824...5515tz9.th.jpg http://img76.imageshack.us/images/thpix.gif

[URL=http://imageshack.us]http://img76.imageshack.us/img76/824...rs55515tz9.jpg[/
10-14-2008, 12:22 PM
BababooeyHTJ

Quote:

Originally Posted by Ket

Biostar probably do have some decent betas kicking about, their just taking their sweet time in making one of them official. Keep bugging them ;)

I sent an email to their Taiwan branch complaining about the voltage options and especilly the GTLs. Hopefully more people do the same. They have to have some betas kicking around.
Keatlck- We are using very similar settings. I need the same vcore to stabilize the same 445fsb x9multi, I could get a little more with some real GTL options. We also have the same VID on our chips. What is your vtt and NBv? Can you boot your ram at 890mhz 4-4-4-12 or at 1066mhz 5-5-5-15? Can you run Everest cache and memory bench? Good luck.
10-15-2008, 04:46 AM
lha

So has this mobo any Vdrop ? I am buying this one when i have enough money!
Sorry about asking vdrop, but i dont have time to read all the pages...
10-15-2008, 02:52 PM
MTP04

Anybody know where on this motherboard I can check vdimm with a multimeter? They seemed to have labeled everything (vcore, Vnb, Vtt, etc) except vdimm.
10-15-2008, 03:46 PM
ceemic

MTP04, http://www012.upp.so-net.ne.jp/ohij2/bio-vddr-mod.jpg
10-16-2008, 06:22 AM
MTP04

Thanks ceemic:up:
10-17-2008, 07:59 PM
Ace-a-Rue

long live Biostar Intel Boards!
10-19-2008, 06:11 PM
Ace-a-Rue

Quote:

Originally Posted by lha

So has this mobo any Vdrop ? I am buying this one when i have enough money!
Sorry about asking vdrop, but i dont have time to read all the pages...

this board has Vdroop...relatively small for a dual core and within other boards that say they have load-line calibration...i recorded about 0.024v droop for my E8500 and just about double for my QX9650.
10-19-2008, 07:04 PM
EliTE22

Quote:

Originally Posted by Ace-a-Rue

this board has Vdroop...relatively small for a dual core and within other boards that say they have load-line calibration...i recorded about 0.024v droop for my E8500 and just about double for my QX9650.

i get no vdroop, in the bios it 1.264V and is 1.264V in cpu-z
does anyones tpower i45 want a lot of voltage for the ram???
10-19-2008, 07:08 PM
politenessman

i have had this board since day one and am tired of the vcore adjustments and none of my ram (g.skill ddr2 1000, tracer 1066, ocz 1150) can come anywhere near their default speeds. so i give up. what is another really good overclocking board for an e0 dually? no gigabyte or asus, plse. so i guess this leaves dfi. which dfi (pcie 2.0 only) is the best for this? and no issues with hd4870 cf.
10-19-2008, 07:10 PM
Ace-a-Rue

Quote:

Originally Posted by EliTE22

i get no vdroop, in the bios it 1.264V and is 1.264V in cpu-z
does anyones tpower i45 want a lot of voltage for the ram???

we are talking about under 100% load!
10-19-2008, 07:12 PM
EliTE22

Quote:

Originally Posted by politenessman

i have had this board since day one and am tired of the vcore adjustments and none of my ram (g.skill ddr2 1000, tracer 1066, ocz 1150) can come anywhere near their default speeds. so i give up. what is another really good overclocking board for an e0 dually? no gigabyte or asus, plse. so i guess this leaves dfi. which dfi (pcie 2.0 only) is the best for this? and no issues with hd4870 cf.

i have been trying to get my Corsair Dominator 1066Mhz to 1066 but can get passed 1050 and that with some voltage and fanss, this mobo loves the fsb but, can handle oced ram;)
10-19-2008, 07:13 PM
Ace-a-Rue

Quote:

Originally Posted by politenessman

i have had this board since day one and am tired of the vcore adjustments and none of my ram (g.skill ddr2 1000, tracer 1066, ocz 1150) can come anywhere near their default speeds. so i give up. what is another really good overclocking board for an e0 dually? no gigabyte or asus, plse. so i guess this leaves dfi. which dfi (pcie 2.0 only) is the best for this? and no issues with hd4870 cf.

i used GSkill ddr2 800 and it worked right up to about 1040 mhz for an E8500...you must not have the correct bios settings!
10-19-2008, 07:14 PM
Ace-a-Rue

Quote:

Originally Posted by EliTE22

i have been trying to get my Corsair Dominator 1066Mhz to 1066 but can get passed 1050 and that with some voltage and fanss, this mobo loves the fsb but, can handle oced ram;)

look at page 1 of this thread!
10-19-2008, 07:16 PM
EliTE22

Quote:

Originally Posted by Ace-a-Rue

we are talking about under 100% load!

0.008V :D with q6600 GO
10-19-2008, 07:21 PM
EliTE22

2.4V that high:shocked:
srry, i should have read a little
10-19-2008, 07:22 PM
Ace-a-Rue

Quote:

Originally Posted by EliTE22

0.008V :D with q6600 GO

well, then, you must have the immaculate conception of motherboards!;)
10-19-2008, 07:30 PM
EliTE22

Quote:

Originally Posted by Ace-a-Rue

well, then, you must have the immaculate conception of motherboards!;)

containing no flaw or error, i like to think so :D
in the bios it also flash around a bit to 1.256v seem a little funny:rofl:,

Show 100 post(s) from this thread on one page