Printable View
Just set mine up. Bios 1.36 gives up to +18.3% vcore which gives me around 1.92v reading if needed, and vdim with an overvolted 3.3 line gives around 2.9v so this seems the highest voltages available on a non-modded 939 board. Actually, the transition to the Neo2 was one of the most trouble free simplest installs I have ever done. So far fairly impressed with it.
Hey everyone
On my last setup:
P4C800Deluxe -E w/3GHz@3.9GHz and 4x256MB BH5 sticks
I could run my POV6800Ultra@475/1300 for benching. Now on my new setup:
K8N Neo2 Platinum w/4000+@10x260GHz and 2x512MB Geil Ultra X
I can only run my POV6800Ultra@430/1200. I've searched the net up and down, and have found some people with the same resaults. It seems that videocards overclock less with this motherboard, than with others. I talked to one guy that changed from this motherboard to a Asus card and gained a lot in videocard overclocking. You guys have any solutions for this problem?
Oh yeah, does Bios 1.36 have any improvements over 1.35?
Cheers mates
I have a couple of questions.
At present I have the MSI 754 board and am thinking of going to the 939 board soon.
1) The OCZBooster seems to work fine on the 939 board but how does it fit in if it is right next to one of the DIMM's ? On my 754 there are 3 slots and the middle slots splits them up so it fits in. On the 939 are both green DIMM slots dual channel, or one purple and one green ?
Has anyone tried the VIA 939 MSI Neo with the KT8000 Pro chipset rather than the nforce3 250 ? Via normally are quicker than nvidia with K8, but is the AGP/PCI locked and does VTT track VDIMM ?
Regards
Andy
Run slots 1 & 2, green/purple closest to socket for dual channel, and run your slot 4, farthest from socketQuote:
Originally Posted by zakelwe
Hi all guys! :D
I have the Booster in the second slot and in the third and fourth 2x256Mb of Bh-5 ;).
I have some problem to create Raid with this MoBo :(.
Where i can select the two Sata's ports from bios? :confused:
Tnx all & Regards :toast: .
You want to use the 2 ram slots closet to CPU to get stable dual channel, use slot 4 (farthest from CPU) for booster like above person said.
For raid use the 2 raid connectors closet to CPU if you want locked SATA, the 2 sata farther from CPU is not locked.
I see Opp used one to get #2 in the Orb 3dmark2001
So I guess he likes his.
Regards
Andy
i have thi s mobo.......
i'm very interesting for the ods ecc.....but i haven' t the cpu ( i want a 3500+ 0.09 but in italy it don't arrive now) :mad:
Not bad:)Quote:
Originally Posted by zakelwe
I'm running it at 318x10 with 5:4 divider. Mushkin Level II does 265MHz 2-2-2-5 at 318 FSB.
How can I lower the TRC mem timing on this mobo?
OPP
A64 Tweaker maybe?
I've never used it, where do I get it?Quote:
Originally Posted by JNav89GT
OPP
http://users.tpg.com.au/spark69/a64t...eaker_V031.zip
Here you go OPP ... have you seriously never used it ? :D
Quote:
Originally Posted by Kane
When you're in the bios press shift+f2 then alt+f3. In the cell menu disable ATI/Nvidia speedup. When it's enabled it allows the motherboard to overclock the videocard in 3d. This will really goof up the speeds you *think* the card is running.
Hi guys, i have some problem with this mobo :(.
I have tryed:
FSB:220Mhz
HT:x4
Molt:x11
Ram:2225 1:1 2.9V
Cpu V: Default (1.45
All works good ;)
FSB:225Mhz
HT:x4
Molt:x11
Ram:2225 1:1 3V
Cpu V: 1.55
It don't finish 3dMark01 :(
I'm usin default bios & Sata 3-4... any suggestions? :toast:
Regards :D
Yea I'm serious:DQuote:
Originally Posted by LilGator
Thanks, I'll play with it later today:)
OPP
I have seen this happen: in win2k I have ATI tool open, and opening 3dmark01 increases card clock by 20MHz on core and ram. this doesn't happen when Nvidia/ ati speedup is disabled in bios.Quote:
Originally Posted by Poki
My question is are clockspeed jumps the same for Nvidia users, or other ATI users? And if so what determines how much of a speed boost.
could someone make bios-pictures with a digicam?
i want to know, which timing-options i can set....i didn't find any review, where bios-shots are shown....only got told, what i can adjust...but i want to see it in a picture :D ;)
And who said BH5 sucks with this mobo??Quote:
Originally Posted by OPPAINTER
Yeah, I don't have any problem with BH5 on this mobo too. Using a pair that I've aquired from OPP some weeks ago, I manage to bench it at 265Mhz 2-2-2-5 :D
you must have the OCZ DDR Booster, no? I didnt think it was possible to get that high without higher voltage.Quote:
Originally Posted by arj
I just got bios 1.37. anyone try it yet?
Haven't tried it yet. Could you please send it to my email adresse.
Jim.Ramse@GMail.Com
Cheers mate
- Jim
There's a lot of permuations but it is time well spent for a few hundred extra points (I have not got around to it either though :) ) Nice proggy.Quote:
Originally Posted by OPPAINTER
I just tried another stick of Crucial Ballistix 2565MB tonight and this was pretty good as well. Did 275 at 2.5-3-3-7 with no burn in. That means I have two sticks that do about 275-280 2.5-3-3-7 at 3.05v so am well set for moving over to a 939 board.
Although TCCD is getting all the hype :rolleyes: the Crucial is pretty reliable on the nvidia 250 motherboard. These were sticks sent in the post 2 months apart so deinitely no cherry picking ;)
Regards
Andy
The Beta 1.37 BIOS for the MSI K8N NEO2 Platinum can be found over here.