Computex 2011 - X79 motherboards

Printable View

Show 100 post(s) from this thread on one page

05-30-2011, 06:58 PM
[XC] Synthetickiller

Quote:

Originally Posted by M.Beier

LN2 pots, evaps, waterblocks wont have a problem - what is the issue here? :p:
I bet alot of webstores will bundle their computer solutions with H70 watercooling with the new generation....

Needless to say; Im looking much forward to having a X79 in my hands =)

Just focusing my commment towards the air cooling guys out there. You know who you are!

You know... I just thought, if the DIMM slot arrangment stays the same, installing ram will be a PAIN on the left side (or right if you're inverted ATX).

Now I'm curious what the standard cooler for this guy will be? Typical intel low end stuff or towers like the 990x? :D
05-30-2011, 07:14 PM
bamtan2

Quote:

Originally Posted by [XC] Synthetickiller

Now I'm curious what the standard cooler for this guy will be? Typical intel low end stuff or towers like the 990x? :D

there was a story a while back that intel was coming up with a new design for the standard cooler.

the airflow blocking concerns are probably valid. intel may want more board cooling than a standard tower heatsink provides, and thus might come up with something different that has a fan blowing down...
05-30-2011, 07:54 PM
Computurd

this will suck i hoped to use my ram waterblock on this :( i know i know, ram doesnt need watercooled but its just so damn cool....
05-30-2011, 07:58 PM
DarthShader

Quote:

Originally Posted by Computurd

this will suck i hoped to use my ram waterblock on this :( i know i know, ram doesnt need watercooled but its just so damn cool....

Why the sad face, now you can use two waterblocks, for double the coolness! :D
05-30-2011, 08:11 PM
Computurd

Quote:

for double the coolness!

and twice the restriction! LOL the part that sucks is having to buy new block/blocks.
05-30-2011, 08:58 PM
MadHacker

Quote:

Originally Posted by Computurd

and twice the restriction! LOL the part that sucks is having to buy new block/blocks.

put your ram block in parallel, that way you half the restriction instead.
it is only ram it doesn't need full flow.
05-30-2011, 10:36 PM
Tenknics

I love how the flagship (patsburg) x79 platform doesn't get native USB 3.0 support but all the shoddy panther point derivatives will get it..Z77 Z75 H77 Q77 Q75 B75 - 4 ports too!

:down:
05-31-2011, 01:32 AM
sholvaco

Here's something for all you 4 dimm slots is not enough cry babies.

An ASUS !!concept board!! that combines s2011 with s1366:
http://oi53.tinypic.com/21lvb7r.jpg

http://www.guru3d.com/news/computex-...t-danshui-bay/

Hope vendors don't fall for all the whining and keep the enthusiast/overclocking boards with 4 dimm slots only as speed should be emphasised over capacity on those. Workstation and server boards on the other hand are more than welcome to use 2 or more slots per channel.
05-31-2011, 01:51 AM
Hornet331

22 sata ports... hehe...
05-31-2011, 03:12 AM
FlanK3r

lol :)
05-31-2011, 03:31 AM
noobzed

wtf??
05-31-2011, 04:04 AM
Chrono Detector

Is this for real? Can a 1366 CPU work together with a 2011? Or did ASUS make this motherboard up for laughs?
05-31-2011, 04:04 AM
paulbagz

Concept ofc, but how would the X58 and X79 talk to each other? QPI Links?

What would be the point of so many threads as well as tripple + quad channel RAM?

-PB
05-31-2011, 04:27 AM
M.Beier

Quote:

Originally Posted by Chrono Detector

Is this for real? Can a 1366 CPU work together with a 2011? Or did ASUS make this motherboard up for laughs?

Concept board.... without a real market, none the less a cute gimmick.
So first you can have LGA1366, and at launch day, you change to LGA2011... I think that is the real purpose?
05-31-2011, 05:54 AM
Raja@ASUS

Quote:

Originally Posted by Chrono Detector

Is this for real? Can a 1366 CPU work together with a 2011? Or did ASUS make this motherboard up for laughs?

Not for laughs - it does work. Just not sure if it will be released, though.

-Raja
05-31-2011, 06:09 AM
Chrono Detector

Ok, thanks for the confirmation, Raja, its very interesting to see 2 entirely different sockets working together.
05-31-2011, 07:49 AM
TheLostSwede

Well, the Danshui Bay board can actually run both CPUs simultaneously, something that obviously didn't get through...

Also, X79 notebook anyone? http://vr-zone.com/articles/clevo-x7...tex/12463.html
05-31-2011, 08:40 AM
lowfat

Quote:

Originally Posted by sholvaco

Here's something for all you 4 dimm slots is not enough cry babies.

An ASUS !!concept board!! that combines s2011 with s1366:

http://www.guru3d.com/news/computex-...t-danshui-bay/

Hope vendors don't fall for all the whining and keep the enthusiast/overclocking boards with 4 dimm slots only as speed should be emphasised over capacity on those. Workstation and server boards on the other hand are more than welcome to use 2 or more slots per channel.

My mind has just been blown. http://smiliesftw.com/x/3deek3.gif

Can't say that would be useful at all. But nifty nevertheless.

Here is to hoping some manufacturer decides to make a dual socket overclocking LGA2011 board.
05-31-2011, 09:27 AM
[XC] hipno650

Quote:

Originally Posted by Raja@ASUS

Not for laughs - it does work. Just not sure if it will be released, though.

-Raja

if you can make it work and release one I can garnette I will buy one. Thats nothing but BAD @$$ ahahaha
05-31-2011, 09:38 AM
zads

I'm liking the double clamp socket mechanism- should make for more even pressure across that long package.
Also liking the threaded socket retention mechanism- no more PCB through hole junk with pushpins and backplates etc.

Quote:

Originally Posted by bamtan2

this platform is for serious users, not people who think they need dimm heatsinks

lol :clap:
but the question remains, how am i gonna fit ram waterblocks on there?? :rolleyes:
05-31-2011, 10:20 AM
zads

Quote:

Originally Posted by Raja@ASUS

Not for laughs - it does work. Just not sure if it will be released, though.

-Raja

That thing looks burly.
Hmm.. Since I assume this is board is about keeping your old hardware since LGA 1366...

ASUS, can you build me a board with all of the Intel sockets in the past 3 years:
LGA 2011, 1567, 1366, 1156, 1155?
05-31-2011, 12:57 PM
sholvaco

^
How 'bout the last 15 years? I've still got a Slot 1 Celeron I'd like to put to good use.:devil:
05-31-2011, 02:56 PM
trn

Eh? The sign says "The Intel Gulftown CPUs offer great overclocking capacity while the next generation CPU is better in multi-threaded computing. Combined you can take advantage of both with the Danshui Bay motherboard."

Not a great sign for SB-E overclocking unless they specifically had in mind a Xeon 8c/16t lower clocked SB-E (like the ES we have seen, but with retail-higher clocks.) But who knows... maybe they were drunk when they thought up this monster or i'm just reading into the last half of the sign too much (or else they would have combined a 1155 + 2011 if they wanted clocks + threads.) Regardless :up: for Asus for even showing such a wacky design :)

Quote:

Originally Posted by sholvaco

Here's something for all you 4 dimm slots is not enough cry babies.

An ASUS !!concept board!! that combines s2011 with s1366:

http://www.guru3d.com/news/computex-...t-danshui-bay/

Hope vendors don't fall for all the whining and keep the enthusiast/overclocking boards with 4 dimm slots only as speed should be emphasised over capacity on those. Workstation and server boards on the other hand are more than welcome to use 2 or more slots per channel.
05-31-2011, 03:01 PM
sin0822

OMG @ the asus board that is so cool
05-31-2011, 04:12 PM
MadHacker

I think Asus would have got a better return on their research investment if they had implemented dual s2011 sockets instead.

Show 100 post(s) from this thread on one page