New batch 980x is a little devil :D 3018B179

Quote:

---

Originally Posted by Splave

hard to say 1005 hard restarts sometimes when I only change the bclk or multi, 704 never seems to do that but CBB is -130c so its not a big deal for me.
I had issues with 2:12 on the 1005 but i seem to be the problem and not the bios! ;)

---

2:12 is an interesting thing with 1005 bios
simply on air, changing the default settings to 133 / 1600 ram 2933 uclk , and the board wont post. cpu led blinking... BUT , if i change the mem multi from 10 to 14 - easyboot, and after that, 12 boots easily too... who understands..
and it seems to me, x23 uncore multi gives higher uncore mhz with low vtt, but x22 goes higher with higher / 1.4v+ vtt / :shrug:

Quote:

---

Originally Posted by subaruwrc

2:12 is an interesting thing with 1005 bios
simply on air, changing the default settings to 133 / 1600 ram 2933 uclk , and the board wont post. cpu led blinking... BUT , if i change the mem multi from 10 to 14 - easyboot, and after that, 12 boots easily too... who understands..
and it seems to me, x23 uncore multi gives higher uncore mhz with low vtt, but x22 goes higher with higher / 1.4v+ vtt / :shrug:

---

Same here, minus the vtt :)

Glad I'm not the only person with weird uncore/memory divider problems on the RIIIE. I've locked in a few various combinations that work but it took a whole lot of cursing and mashing of the power button to achieve it. Very nice chip there Splave, mad jealous here :up:

Quote:

---

Originally Posted by [XC] gomeler

Glad I'm not the only person with weird uncore/memory divider problems on the RIIIE. I've locked in a few various combinations that work but it took a whole lot of cursing and mashing of the power button to achieve it. Very nice chip there Splave, mad jealous here :up:

---

Ive spent the free minutes / hours of my last week to figure this out, but cannot get it straight. maybe there is something between dram volt + vtt volt + uncore + ram mhz and multis. donno what but its strange, that x22 uncore goes higher with high volt, then x23 , but x23 goes higher with low volt lol...

as I looked older test pics, x20 uncore went up to 4180mhz pifast, on the first ln2 test, last time It couldnt reach anything higher than 4100mhz ...

I think its not surely R3E but gulftown imc related. my 920 bloomie can boot in R3E with any ram - uncore multi , in any condition and its imc can go up to 4900mhz + ... / not maxed /

Quote:

---

Originally Posted by subaruwrc

Ive spent the free minutes / hours of my last week to figure this out, but cannot get it straight. maybe there is something between dram volt + vtt volt + uncore + ram mhz and multis. donno what but its strange, that x22 uncore goes higher with high volt, then x23 , but x23 goes higher with low volt lol...

as I looked older test pics, x20 uncore went up to 4180mhz pifast, on the first ln2 test, last time It couldnt reach anything higher than 4100mhz ...

---

still dont get why it boots 2:14 no problem and then 2:12 works :eek:

Quote:

---

Originally Posted by Splave

still dont get why it boots 2:14 no problem and then 2:12 works :eek:

---

dont get it either m8 :D

but it can boot this way anytime ...
from 10 to 12 no go
from 10 to 14 then 12 easy ...

Did test som voltage, and cb/cbb testing this weekend.

1.8Vcore, cb non, and cbb -140, i thinks its a keeper :-)


http://peecee.dk/uploads/112010/Capture027.jpg

schweet chip :D

Quote:

---

Originally Posted by Nanok

Did test som voltage, and cb/cbb testing this weekend.

1.8Vcore, cb non, and cbb -140, i thinks its a keeper :-)


http://peecee.dk/uploads/112010/Capture027.jpg

---

Nice! :eek:
Splave what does yours do max in 1M?

6320mhz :D found a new bios that fixed my vtt problem though so maybe more?