2220 CL6 Max everest test with 1.65V Vdimm
6-9-7-27-72 with +2200Mhz seems to give good bandwidth :D
http://www.pt1t.eu/public/GSkill%202...st_2200CL6.png
2220 CL6 Max everest test with 1.65V Vdimm
6-9-7-27-72 with +2200Mhz seems to give good bandwidth :D
http://www.pt1t.eu/public/GSkill%202...st_2200CL6.png
Hey HIWA,what's this model's chips?thanks
heyQuote:
Originally Posted by artkobe
we still no have any info about that
:up:
Sorry for hijacking....
Regarding the BIOS; Can you PLEASE tell which timings has been changed to less intensive on the ram??? Using anything but F5 on my P55A-UD6, looses 20mhz on top, which is alot when running CFX....
I use ripjaws pc12800 7-8-7, and they suck on UD6 as well... Which timing should I decrease so I can run a ram multiplier higher, I use bclk*4 at the moment to get the ram stable.... (Yes its above rated freq, but I know they do 1100mhz+)
it's dipend on IC
hypers , BBSE all series
CL + 1 tRCD help more
tRFC +100 help
tWL +8 help
if you want high freq memory
on no-name ic's maybe yours ... check it
CL + 2 or 3 tRCD help more
same as hypers, bbse ...
Some DJ-F flying with +2 tRCD ;)
f6 Final is the best for me
Will post 8GB OC tonight
They said we cant open it ;) And they glued it very well !Quote:
Originally Posted by artkobe
Time to push 8GB PIS 2200 Cl7 :D
8GB 2270 7-10-7-28 1.72 3dmarks
http://forum.nexthardware.com/galler..._screen011.jpg
http://forum.nexthardware.com/galler...ium/1_8-05.jpg
http://forum.nexthardware.com/galler...ium/1_8-06.jpg
8GB 2292 7-10-7-28 1.72 Everest
http://forum.nexthardware.com/galler...um/1_8-eve.jpg
and quick 2400 7-10-7-28 run on E658
RTL's 47/49 thanks lardy
http://forum.nexthardware.com/galler...9_20-05-07.jpg
http://valid.canardpc.com/show_oc.php?id=849633
Oh lovely 8 GB results :clap:Quote:
Originally Posted by hiwa
nice proactive support! :toast:Quote:
Originally Posted by GSKILL TECH
you sound surprised? ^^Quote:
Originally Posted by Pt1t
And that ? +2400Mhz CL6 SS done :D
All on air ... but Vdimm to 1.78V
http://valid.canardpc.com/show_oc.php?id=851068
http://www.pt1t.eu/public/GSkill%202...400Mhz_CL6.jpg
Hi,
which memory is the best for oc?
this G.SKILL PIS F3-17600CL7D (about $240)
or
Patriot Viper II Sector 5 Series DDR3-16000 (about 215$)
and g.skill perfectstorm 2133MHz CL8 1,65V (about $280)
price for vipers is good, but... :confused:
Thanks :)
Starting
pis 2200 Cl7 ln2 -100 :yepp:
cpu phase -35
1.76 mem
1.54vtt
2544 6-10-10-28
http://forum.nexthardware.com/galler...44-6-10-10.jpg
http://valid.canardpc.com/show_oc.php?id=852653
2676 7-10-10-28
http://forum.nexthardware.com/galler...6-7-10-10-.jpg
http://valid.canardpc.com/show_oc.php?id=852683
lets see it :up:Quote:
Originally Posted by hiwa
will try tight tRCD under cold later :DQuote:
Originally Posted by dinos22
2500 6-10 screen
http://forum.nexthardware.com/galler..._screen012.jpg
2470 6-9-6-28
http://forum.nexthardware.com/galler...9_13-52-47.jpg
http://valid.canardpc.com/show_oc.php?id=854527
Setup pix :D
http://forum.nexthardware.com/galler...1_IMG_0527.JPG
http://forum.nexthardware.com/galler...1_IMG_0533.JPG
http://forum.nexthardware.com/galler...1_IMG_0539.JPG
http://forum.nexthardware.com/galler...1_IMG_0542.JPG
http://forum.nexthardware.com/galler...1_IMG_0543.JPG
will playing 6-8 and 7-9 :p:
here is my contribution to the thread, i am not sure why i chose 3dmark vantage cpu test as a stability factor but I DID..
hiwa/thomas some awesome results there, will have to take my modules subzero to see how they got cas6, 6-8 benching would be nice over 1100 for sure
all with fairly low vdimm 1.70~, please consider these results
7-10-10-28
http://i200.photobucket.com/albums/a...creen000-2.jpg
6-9-6-29
http://i200.photobucket.com/albums/a.../screen002.jpg
8-9-8-24
http://i200.photobucket.com/albums/a...creen005-2.jpg
Good job james
here is nice 6-9-6
2556 6-9-6-28 1.76 Pi and validation
http://valid.canardpc.com/show_oc.php?id=857070
http://forum.nexthardware.com/galler...9_19-59-40.jpg
http://forum.nexthardware.com/galler...m/1_6-9_pi.jpg
i guess UD6 left me, will check later
This kit is so insane. They are selling here in Aus for almost twice as much as the 2000C9 Ripjaws. Not what you would call a good value proposition - but the performance is insane.
On a totally unrelated note, missing Agg and OCAU after they got hacked... Feel like something's missing from my life... If you need a fix of hardware news, please take a look at my site: http://xtreemcom.com
once again, Gskill shows very high CLK & CL module, very impressive
well done james and hiwa.
2556 6-9-6-28 1.76
WOW
congrats Bro
we are going into a new level of performance :S
performance lol no! :D
MHz nice
performance = gay :D
key RAM timing for i7 is tRCD and this RAM just isnt gonna cut it. Their Ripjaws are better modules if you want performance RAM as youngpro showed in F1OC
Quote:
Originally Posted by dinos22
:P .
wow :D:D:D: :up:Quote:
Originally Posted by hiwa
My kits arrived today but I've experianced boot failure issue when using 2:10 multiplier @ 1600Mhz+ while 2:12 run flawlessly. Any hints?...
MB: P7P55D-Deluxe / EVGA P55 FTW Both in latest BIOS version