SPI 1M 8.843s by NewBeetle (Team Japan)

Printable View

Show 100 post(s) from this thread on one page

07-24-2007, 04:57 PM
Florent

Insane CPU :shocked:
07-24-2007, 09:24 PM
STEvil

Second CPU today i've seen do 3.8 @ ~1.3v ;)
07-24-2007, 09:27 PM
dinos22

Quote:

Originally Posted by NewBeetle

about -165c :eek:

this is the key i think to this CPU :) besides having a master push it :D

is that CPU core temp or base temp :shocked:
07-24-2007, 10:28 PM
NewBeetle

Thank you very much, Enoc-san, Florent-san, STEvil-san, dinos22-san :toast:

Quote:

Originally Posted by Enoc

5815mhz :eek:

awesome :D
maybe next try it will go well...:up:

I hope so. ;)

Quote:

Originally Posted by STEvil

Second CPU today i've seen do 3.8 @ ~1.3v ;)

It looks like a good cpu.
Good luck! :up:

Quote:

Originally Posted by dinos22

this is the key i think to this CPU :) besides having a master push it :D

is that CPU core temp or base temp :shocked:

The temp was measured at the base of this CPU Pot with this Digital thermometer. :cool:

DEWA DEWA ～
NewBeetle
07-24-2007, 10:43 PM
funkflix

:shocked:

Congratulations! :toast:
07-25-2007, 01:19 AM
nachthymnen

Very impressive:eek:
Congratz!
07-25-2007, 01:56 AM
Nosfer@tu

But that cpu pot looks like nothing else :D
How can it be more affective then :D ?
07-25-2007, 02:58 AM
G H Z

Hi NewBeetle,

What does this tape inside do? :)

Quote:

Originally Posted by Nosfer@tu

But that cpu pot looks like nothing else :D
How can it be more affective then :D ?

It's a good reminder that there is more than one way to do things ;)
07-25-2007, 03:07 AM
Krid P

wow! I am speechless...
07-25-2007, 05:44 AM
noel82

:clap: Amazing job!!! :clap:
07-25-2007, 06:13 AM
Gautam

Quote:

Originally Posted by Nosfer@tu

But that cpu pot looks like nothing else :D
How can it be more affective then :D ?

And yet it follows basic design cues that Team Japan has been following since before XS even knew what liquid nitrogen is. If anything they know what's effective, and the proof is in the pudding. I don't see anyone else doing 1M at 5740 or suicides at 5815 now do I?

And thanks for showing your internals NewBeetle. I'm sure that a countless amount of research went into your container. :up:
07-25-2007, 07:48 AM
NewBeetle

Thank you for your congratulations, funkflix-san, nachthymnen-san, Krid P-san, noel82-san

Quote:

Originally Posted by Nosfer@tu

But that cpu pot looks like nothing else :D
How can it be more affective then :D ?

This pot named "MaxxNEO" was made for duck and me by Tam.
The aim was to have captured Prescott. :cool:

Quote:

Originally Posted by G H Z

Hi NewBeetle,
What does this tape inside do? :)
It's a good reminder that there is more than one way to do things ;)

The role of the tape is to adjust the surface area and to manage the
temperature. :cool:

Quote:

Originally Posted by Gautam

And yet it follows basic design cues that Team Japan has been following since before XS even knew what liquid nitrogen is. If anything they know what's effective, and the proof is in the pudding. I don't see anyone else doing 1M at 5740 or suicides at 5815 now do I?

And thanks for showing your internals NewBeetle. I'm sure that a countless amount of research went into your container. :up:

Gautam-san, many thanks always. ;)
I have four CPU copper pots.
Each pot is used properly by the character of CPU.
Though MaxxNEO is suitable for CPU of high generation of heat,
it has a fault that the setting and driving are difficult. :(

DEWA DEWA ～
NewBeetle
07-25-2007, 08:22 AM
Gautam

Quote:

Originally Posted by NewBeetle

Each pot is used properly by the character of CPU.

This is something that us benchers in the west are only beginning to grasp and its worth noting. Some people are under the impression that an endless amount of capacity is necessary, and make extremely large pots accordingly.

However if the capacity of the pot is too high for the CPU on hand, you'll have a needlessly long pulldown time and often a lot of swing.

Just as phase builders tune their systems for the load, LN2 containers can be tuned for a load as well. Which is certainly an intricate process of trial and error that can take a very very long time and many attempts to get right.

On that note, NewBeetle-san, forgive me for being slightly off topic, but do you know when the Japanese first began LN2 benching? 2001 or so or was it earlier?
07-25-2007, 09:32 AM
Patriote

OMG! Almost 6Ghz with a E6700! This is sick!
07-25-2007, 09:49 AM
`danny

That is nuts good job man
07-25-2007, 11:06 AM
aranoth

Wow,awesome overclocking NewBeetle-san
p5k proves to be a sweet motherboard,I think I'll buy one soon
07-25-2007, 09:19 PM
NewBeetle

Thank you so much, Patriote-san, `danny-san, aranoth-san :toast:

Quote:

Originally Posted by Gautam

On that note, NewBeetle-san, forgive me for being slightly off topic, but do you know when the Japanese first began LN2 benching? 2001 or so or was it earlier?

Though I don't know in detail, LN2 Benching in Japan had already reported in 1998.
I think TAM-san surely knows about LN2 Benching in Japan better than I.
By the way, My LN2 Benching began to be real from the summer of 2004.

And see you next post..... :D
07-25-2007, 09:28 PM
NewBeetle

I tested the possibility of new FSB 1333MHz CPUs. :D
A better record will come out if there are good mobo and good memories. :p:

modPI 16M WR : 04m12.750s @5510.5MHz (FSB612.3MHz x 9)
http://homepage2.nifty.com/NewBeetle...m12s750_WR.png

modPI 32M WR : 09m08.844s @5504.3MHz (FSB611.6MHz x 9)
http://homepage2.nifty.com/NewBeetle...m08s844_WR.png

(Set up)
M/B：ASUS P5K Rev.1.02G VMod (75MOACD45***/P5K0414.ROM)
M/B Bed：「V-TEC ARC Bed Rev.3.3」
NB watercooling：Alphacool NexXxoS NBX-A
SB watercooling：Alphacool NexXxoS NBX-N
CPU：Intel Core2 E6700(L633A549#7)
CPU cooling：MaxxNEO + LN2/temp：-155C
Memory：Team Xtreem PC2-8500 C4 1GBx2 4-4-4-4
VGA：Matrox Millennium PCI 2MB
HDD：Western Digital WD360ADFD
Power Supply：OCZ PowerStream 520W
Vcore：1.825V(Actual)
Vio：3.50V(PC Probe 2)
Vdimm：2.61V(Actual)
OS：Windows Server 2003
Remarks：FSB575MHz x 9@boot
07-25-2007, 09:32 PM
dinos22

nice man

600+ FSB looks awesome at those clocks and cooling :)

almost sub-9m 32M run too wow
07-25-2007, 09:58 PM
1Day

:) OT Would like to know more about the history of LN2 benching and the evolution of the POT designs used in particular. Possible future thread? Or are there records (both text and pictorial) of those early LN2 available on this or other forums? Searched here but no joy.:wave:

Back on topic. Looking forward to seeing more FSB 1333MHz results - again great efforts thanks for sharing.
07-25-2007, 10:01 PM
Trox

Congratz, try some new FSB1333mhz cpu's
07-25-2007, 10:03 PM
T_M

Quote:

Originally Posted by Gautam

This is something that us benchers in the west are only beginning to grasp and its worth noting. Some people are under the impression that an endless amount of capacity is necessary

QFT.

Thanks Beetle for sharing your surface area concept, so simple yet so effective
07-25-2007, 10:17 PM
dinos22

Quote:

Originally Posted by T_M

QFT.

Thanks Beetle for sharing your surface area concept, so simple yet so effective

guatam is referring to surface area not newbeetle-san

can we see the 4xdifferent pots and what characterises their designs

how do you actually go about testing a CPU and marry to specific pots :)

this is a lot more interesting than all the winking we get from a few guys "in the know" at XS/west i think
07-25-2007, 11:12 PM
mup0

We want sub8 sec sPI from you :PPP
07-25-2007, 11:31 PM
yotomeczek

Great result :up:

Where can I buy V-TEC ARC Bed Rev.3.3 (does it include pci card holder ?) ??

Show 100 post(s) from this thread on one page