Printable View
I can say that the bsel mod doesnt work with p5w dh deluxe bios 2004.
I've redrawn it at least 10 times, and no sign of it working.
1066 mod boots as 800, and 1333 doesn't boot at all.
Drawing done with a silver conductive pen and checked with a multimeter.
Did anyone try it with P5N-E SLI ?
Will this work on other 800 MHz FSB CPUs like a Celeron 440?
:cool:
Hello ...
Does this mod (e4300 Fsb 1066) work with Msi 975x Platinum v.2 :cool: ?
Anybody did it?
Other question?
i know this mod isn't guarantee for oc, because i can't see what temp?
Anybody have air cooler, but idon't know than it's very hot or no
Note:
Still I have not used 975x because i haven't power supply, hard drive, etc.. so my new computer's incomplete.
If i do mod my e4300 fsb wall, with HSF zalman 9700 and artic silver 5 ?
And i do my setting 9x400 = 3600, Voltio (don't know, maybe normal o more)
So what is my temp?:confused:
Please anybody can advice me about temp for e4300 mod wall fsb???/:up:
Thank you :D:up:
Quote:
Originally Posted by caligula
Tried it, works now :D
Does not eliminate the "FSB wall" but... it's nice to know :(
Will this work on a Gigabyte P35 DS3R and e4400. I hit a wall at 350.
i dought it, if your running the stock multi you are prolly at the cpu's limit. as i had my E4300 doing 380fsb.Quote:
Originally Posted by Rippon
350 is the wall on the lowest multi, for me. I was more interested in it because someone here said it helped them overclock to the same speed with less voltage, and overclock higher.Quote:
Originally Posted by Evilsizer
works fine om my asus?
i'm hitting 350~360 wall... with no mods
my prossie run tom DFI Infinity, using NB trap in bios
using with volt 300mv in bios.
batch code L640a497
http://i160.photobucket.com/albums/t...x/puinyaku.jpg
Did the mod on a E2140 and an Asus Pundit P2-P5945G.
Worked as expected even with speedstep on (6x266 on idle, 8x266 on load).