Micron D9 Users: Post your 24/7 voltages!

Printable View

Show 100 post(s) from this thread on one page

03-18-2007, 06:26 AM
Family man 72

2GB G.Skill 6400HZ

@980MHz 5-4-4-9 vdimm 2.25V
03-18-2007, 01:36 PM
ziddey

5-4-4? download mbench and memset. check the latency at 5-4-4. Then set to 5-5-5 and recheck latency.
03-18-2007, 01:46 PM
s1rrah

my 24/7 settings:

Brand: Mushkin Xtreme (2x1gig) PC2-6400 (don't know the D9 flavor)
Speed: 900 MHz @ 4-4-3-10
Voltage: 2.25v
03-18-2007, 09:27 PM
BlackThyra

OEM Micron D9GKX DDR2 800 @ DDR 972 4-4-4-10 2.2v
03-18-2007, 09:35 PM
dXi

4GB OEM Micron D9GMH DDR2-400 @ DDR2-1200 4-4-4-12 2.2v
03-18-2007, 09:38 PM
ziddey

micron has gkx oem? cool. all i knew was that crucial topped at gmh iirc
03-18-2007, 09:39 PM
BlackThyra

Quote:

Originally Posted by ziddey

micron has gkx oem? cool. all i knew was that crucial topped at gmh iirc

yep. bought straight from supplier..

the ram capable of running 1100+ @ 2.4v 4-4-4-10. orthos stable! :D

Micron owns crucial aight...
03-19-2007, 12:28 AM
Xcel

Cellshock PC2-8000
@ 1000MHz, 4-4-4-12, 2.15v
03-19-2007, 12:36 AM
BryaN.sG

Quote:

Originally Posted by dXi

4GB OEM Micron D9GMH DDR2-400 @ DDR2-1200 4-4-4-12 2.2v

This is just crazy, how about a screenie?
03-19-2007, 12:51 AM
NightRaven

hmm kingston 2x1gb 533 cl 4 micron d9 gmh

2.2V DDR2 1127mhz 5-4-4-8 2T
03-19-2007, 02:02 AM
M0b1us

Cellshock PC8000 @ DDR1000 5-5-5-15 1.85V:D
03-19-2007, 02:22 AM
andre X_X

TeamXtreem PC5300 @ 545mhz CL5-5-5-12, 1.88v

http://img48.imageshack.us/img48/214...551219vbc3.jpg
03-19-2007, 08:00 AM
Family man 72

Quote:

Originally Posted by ziddey

5-4-4? download mbench and memset. check the latency at 5-4-4. Then set to 5-5-5 and recheck latency.

I tested 5-4-4-9 vs 5-5-5-9 with SuperPI and 3DMark. 5-4-4-9 was better in both tests. For example 5-4-4-9 was ~1.2 sec quicker in SuperPI 8M than 5-5-5-9.
03-19-2007, 08:10 AM
lowfat

Quote:

Originally Posted by andre X_X

TeamXtreem PC5300 @ 545mhz CL5-5-5-12, 1.88v

http://img48.imageshack.us/img48/214...551219vbc3.jpg

:cool: nice volts.
03-19-2007, 08:52 AM
CaNNibaL

I use mine CellShock PC6400 @ PC 8000 / 1000 Mhz 4-4-4-4 @ 2,2 v
03-21-2007, 04:14 AM
M0b1us

Quote:

Originally Posted by lowfat

:cool: nice volts.

He did it in AMD platform......:p:
03-21-2007, 04:49 PM
speed bump

TG PC5300

500 4,4,4,12@2.15v motherboard won't go any higher unfortunetly.
03-22-2007, 09:23 AM
paulesko

generic micron d9dqw fat body (cheap ones)

472 4-3-2-1 @ 2.39
03-25-2007, 07:00 AM
Raiden Zero

2.35V 24/7

2x1024MB CellShock DDR800 (D9GMH) + 2x1024MB Crucial Value (D9GMH)

DR800 3-3-3-3 :D
03-25-2007, 07:02 AM
barzi

1.9v 24/7

2x1024 Patriot DDR800

437mhz 4-4-4-4
03-25-2007, 12:51 PM
ziddey

ocz 8800 d9gmh. ran at 2.37v for 3 weeks. they nuked already. rated for 2.4v
03-25-2007, 02:14 PM
Yoxxy

3.29v just read my CAS 3 post :P, Actaully 2.41v, on a set of 6400c3 Corsair. Has been running for 4 months with no problems.
03-25-2007, 02:26 PM
rick_fx

Ram: Tram Xtreem pc5300 3-4-4-8

Daily settings are 520mhz 4-4-4-5 @ 2.25v
03-25-2007, 02:57 PM
Lightman

1 Attachment(s)

I just started playing with this great el-chepo memory!!
2.2V and I run out of my mobo stable HTT :p:
Attachment 57119
Any suggestions??

For more go over there:
http://xtremesystems.org/forums/showthread.php?t=138352
04-03-2007, 04:02 AM
cmos.gr

Quote:

Originally Posted by SMa

Team Xtreem D9GMK PC2-5300 @ 3-3-3-4 333MHz @ 1.85v
They are dying and have an 'unstable zone' between 1.95v & 2.3v, so i'm careful with them till I get a 4Gb kit

Can You give us more info about that?

I Have 2 pairs of 2gb kit CellShock 6400 (gmh) and after 1 month they need more voltage for same Mhz.

Eg I had 2.15v @ 450 4-4-4-12 and now I need 2.3v to be stable...
BUT only with the one dimm.Not both:confused:
I cannot even boot at 533@1.8v...I need to boot only with ''good'' stick set 2.25 eg and boot with both.:mad:

Same to my older 2gb kit...
Its realy too disappointing :(

Show 100 post(s) from this thread on one page