Printable View
Thanks guys for the kudos, much appreciated and nice work yourselves, gotta love these silverstone rigs.Quote:
Originally Posted by PaRn ssR
The upper gpu rad is the swiftech mcr320 and the mobo rad on the back of the case fan is a feser 120....all the fans are either the silverstone hi cfm or logisys. Hope that helps, end transmission.:D
Yep, I've got the mid case and rear fan supplying the cool air and the two top fans shooting it straight out. After a fair bit of experimenting, this netted me idle temps of 28-29deg and load of 55-58 @ 3.91GHz.Quote:
Is it just me or is this fan facing the wrong direction?
Great rigs by the way, everyone!
oh do you mean these? because yours look transparent-ish. :OQuote:
Originally Posted by 1avatar
http://www.coolermaster.com/products...detail&id=4355
Nope, these ones - http://www.coolermaster.com/products...bcate=36&id=95Quote:
Originally Posted by Efekkt
oh, how's the airflow on those? i read that those are only 39 CFM fans?Quote:
Originally Posted by 1avatar
awsome aircooled rigQuote:
Originally Posted by shreekaa
simple and powerfull :up:
Runs cool enough. I have them up top, one in the mid case fan. The rear fan is an old Antec Tri-Cool I'm going to replace shortly and I've got the 1150rpm Scythe Gentle Typhoon on the TRUE. My idle temps sit at about 30-31 Deg while load doesn't got over 60. That's also at 3.91GHz with 8GB of RAM clocked at 570mhz so it's enough for me. I'm probably going to throw a water loop in there though just to help keep the noise down and see how much further I can push the clocks.Quote:
Originally Posted by Efekkt
Hi, I am from singapore. This is my TJ-03.
http://img.photobucket.com/albums/v4...top2009-07.jpg
http://img.photobucket.com/albums/v4...top2009-06.jpg
Specs:
Q9550 @ 3.6ghz + Swiftech Apogee GTZ
powercolor 4870x2 + Dangerden 4870x2 Waterblock
MSI P45 Platinum
Team Xtreem Dark 2x2gb DD2-1066
Auzentech Xplosion 7.1 Gold
Velociraptor 150gb
Seagate 7200.11 1.5TB
Corsair HX620
Swiftech MCR320-QP
Swiftech MCP355 + XSPC Restop.
Changing to TJ-07 soon.
Neat! You're able to actually fit a quad rad down there? Giving me some ideas here.......:)Quote:
Originally Posted by Sir Stunna Lot
@ Kozato: Nice workstation ya got there! Very clean and simple! I sooo want a screen that size too, lol!
Mike
http://i287.photobucket.com/albums/l...1/IMG_0080.jpg
underated case
but totally recommended for users with hx1000 and asus re/r2e
tweak it now can actually be used in a case with ease.
btw took only 30 mins to do this..
will be doing a proper cable management later..
need to route that cpu connector and get some extension for the coolit pcb and definately longer sata cables as currently using the optical drive at lowest bay.
could have sworn i have seen somebody with a quad + triple/dual rad at the bottom with tj07Quote:
Originally Posted by Mike44
Really!!?? :eek: Would need to have some serious air flow through the bottom then...unless one rad pulled air through itself and ejected the hot air into the other? So I guess it can be done then, eh? Pretty neat.Quote:
Originally Posted by cstkl1
And hey, nice case case cst! Is it just me or does it look.....kinda tipped? :cool: Lol, very interesting design!
Mike
kekek nope actually the coolit fan..Quote:
Originally Posted by Mike44
replaced it..
somehow misplaced one screw
so thats y.
just shifted it from a tj07
and still have another tj07 with the motherboard tray missing( actually stolen when i was drying it in the lawn after spray paint :P)
btw the reason was because of the tweak it function..
now for the first time can actually use it with ease in a case.
Nicee cases !!!!!!!!
awsome theres one there that must have some engineering
ok guys. 15 months after setting this thread up if FINALLY finished my watercooling. Im very pleased with the results
http://i642.photobucket.com/albums/u...k/DSC02074.jpg
http://i642.photobucket.com/albums/u...k/DSC02076.jpg
What LCD is that please???Quote:
Originally Posted by Sir Stunna Lot
Ive seen a triple/quad with a duel rad on the bottom but not a quad and triple. Biggest problem i can see would the the PSU. You would have to have a small sized PSU to even stand a chance.Quote:
Originally Posted by cstkl1
That's a very neat looking case. Your case fan setup appears quite unorthodox; are all the case fans are intakes, with no exhaust?Quote:
Originally Posted by 1avatar
Top two are exhaust while the rear and mid are intakes. They're high enough cfm that I've found it to be both quiet and stable to run no hotter than 60 at load on a Q9550 C1 @ 3.91GhzQuote:
Originally Posted by CryptiK
:welcome:
Here is my little HTPC. I will be upgrading to i7 here shortly. So I am going to move the fan conrtoller out the front of the case beneath the front rad. I will also remove the fans in front because they do absloluty nothing for temp wise and I should then have enough room to mount the pump in side.
Attachment 94896
Attachment 94897
Attachment 94898
Attachment 94899
Attachment 94900
New and better pics of my lan gamer:)
http://i243.photobucket.com/albums/f...a/IMG_2557.jpg
http://i243.photobucket.com/albums/f...a/IMG_2571.jpg
http://i243.photobucket.com/albums/f...a/IMG_2581.jpg
nice rigs,congratulations:) :up:
Yep, very nice rigs. I'll be updating my pics soon. :up:
updated pic..
http://i40.tinypic.com/ju72u9.jpg
:welcome:
vule how do you like the FT01? Are you going to be watercooling it?
looking good from the outsideQuote:
Originally Posted by Vule
Really good looking case :up:Quote:
Originally Posted by Vule
Hi guys. Some fantstic builds here. I entered my rig into Guru3D Rig of the year competition and i won whoop whoop. Got an OCZ Vertex Series SSD in the post. Im looking forward to seeing how much faster they are :D
emoners that is an awesome sff case.
.........