@knet: great looking cube you got there!
Printable View
@knet: great looking cube you got there!
GPU is a MSI TWNFRZR :p: I didn't care much for it, however :D
X3440
GTX460
Micron BAMF RAM is still incomming, meanwhile it's got a single 2GB Micron little cousin :(
SG06s (must more beautiful than pictures can fully digest:)).
http://img441.imageshack.us/img441/4310/dsc00169uk.jpg
http://img266.imageshack.us/img266/8665/dsc00166jg.jpg
http://img535.imageshack.us/img535/9972/dsc00168s.jpg
http://img198.imageshack.us/img198/9240/dsc00170zt.jpg
@ ScottALot....nice build! Are you running a string of white LEDs or are those associated with the fans?
The dye you mention....it appears to have a purple tent - Uv reactive?
@ jeremyshaw....Nice work of shoe horning in stuff!! My only WC system at the moment is an SG01 Evo and but took the easy way out and used an AquaComputer aquaduct 260! ;) Any thought given to doing something with the front for freer airflow?
Your right about the SG0X series being beautiful…..the only case I haven’t modded was an SG06.
Temps are a wee bit high right now (low 90s :eek:) with prime+fur, however, my primary goal with this system was silence.... lol. I just found out going the shuriken+MSI TWNFRZR route might of been uhhh..."more" silent, since I have to run the GT-AP-15 at the front of the case at max to even get these temps :( I might of mounted something incorrectly, however, I'm still leak testing the loop just in case.Quote:
Originally Posted by jedihobbit
I do have a build log on [H] that offers a wee bit more insight into this setup :p:
http://hardforum.com/showthread.php?t=1579502
It's the NZXT Sleeved LED kit... looks fantastic!Quote:
Originally Posted by jedihobbit
The dye isn't UV reactive. I could mix in some UV Pink or UV Blue and grab a UV light, but I like how standard the purple is in my build.
ok I have already finished sleeving my psu a few pictures of it and my rig :lol2:
http://www.abload.de/thumb/dsc0779924m9j.jpg http://www.abload.de/thumb/dsc078062umsb.jpg http://www.abload.de/thumb/dsc078096m71.jpg http://www.abload.de/thumb/dsc07810emiu.jpg http://www.abload.de/thumb/dsc07815bmpc.jpg
http://www.abload.de/img/dsc07815cmwa.jpg
samurai, nice pictures, i'd loved to sleeve my cables, but i don't have idea to do that.. :|
Check this out :)Quote:
Originally Posted by p3gaz_001
sargatanas, that's a damn lot of tubing :up:
Hay sargatanas, and I thought my Silverstone TJ09 was a large case! Yours dwarfs most full tower cases! :eek: What else in underneath the rest of your case?
@sargatanas: sieht total rein geklatscht aus, gefällt mir nicht, man sieht kaum noch was von der HW :( - Looks, like it was made in a hurry
How much time *should* it take? :(Quote:
Originally Posted by bundymania
Basically an entire day, from my experience.
This is my main PC, with additional outdoor cooler(detachable).
CPU: i7 980X 4.5GHz
MB: EVGA X58 3xSLI Classified E760
Memory: GeIL Black Dragon 2GBx3 2.0GHz
GPU: EVGA GTX580SuperClocked x3SLI 950MHz
SSD: SAMSUNG MZ-5PA128HMCD-0A
HDD: HGST 2TBx9
RAID: RocketRAID (4xSATA2)
Sound： SoundBlaster Digital Music Premium HD（USB）
Chassis: Lian Li PC-A77FB
PSU: Abee Supremer 1200W + SNE NLX450ROHS1U 300W
:shocked: :worship: :toast:
Dude :eek:! Wow, just.... wow! :worship:
What is it with all of the blingy LED's? I absolutely hate any sort of LED lights on my computers. I used to have Ballistix Tracers in my bedroom. They were so bright I could not sleep with the system on. Nice an simple is the way to go. I guess I'm getting too old for that stuff. 45 is the new 70.
Gotta hide that one fan wire better and replace the red SATA cable and all is well.
[IMG]http://img703.imageshack.us/img703/6986/pic0326.jpg[/IMG]
1. Oh I don't know if the lack of bling means you're getting old.....I'm 62 going on 92 but still like a wee bit o' bling!! :ROTF: However I agree that Vladi's is definately a light show. Also never had to share a bedroom with a computer.Quote:
Originally Posted by Daddyjaxx
2. Still a nice looking build. ;)
Excuse the dark pictures, was a super bright day when I took the pics.
Added a block for the GFX, put some dust filters on the Gt's etc.
http://img714.imageshack.us/img714/3609/img2715ez.jpg
Uploaded with ImageShack.us
http://img89.imageshack.us/img89/252/img2725t.jpg
Uploaded with ImageShack.us
http://img64.imageshack.us/img64/3014/img2733o.jpg
Uploaded with ImageShack.us
My setup:
images deleted - 4 image limit per case. See updated photos here.
Nice, Hewi!
lichyetan ... great job getting everything into what looks like the A05 tiny case :up:
This is my rig setup with liquid cooling enjoy.
http://thumb5.webshots.net/t/72/72/5...5wVYVom_th.jpg
http://thumb5.webshots.net/t/82/182/...5NuqhYH_th.jpg
Then alittle video, http://www.youtube.com/watch?v=XlzOUdwZpls
Thank you, jedihobbit. Yes, this room is not my bedroom, but I sometimes(always?) sleep here on a sofa bed. I don't mind LEDs blinking, but some of them are UV type (for CPU block&Reservoir), so I got tanned.:)
Quote:
Originally Posted by jedihobbit
Just finished this for my Son not to long ago, I have since switch out the GPU to a 570 for him.
I hand polished the case during a stay at the hospital :D
Sorry for the pictures, they were taken with my cell:
http://i900.photobucket.com/albums/a...d/IMAG1119.jpg
http://i900.photobucket.com/albums/a...d/IMAG1120.jpg
http://i900.photobucket.com/albums/a...d/IMAG1143.jpg
:up:
@ nascasho
nice! do you have a build log and/or any more pics?
GREEEEEEEEN!! :up:
it's just me or suddenly a05 build spawned like zerg :eek::eek:
anyway
gotta find DSLR asap
A05 invasion ! Crazy V build is very impressive...
This:up:Quote:
Originally Posted by Th-I3riG02
A05's show up in spurts every now and then.
Crazy V you make my dad look bad. he would never do that for me.
mind you he is a fisherman and a stay at the hostpital means him tying about 50 odd flies not polishing a pc case.
have to do it all by myself, atleast my kids will be happy :D
Here's my Powermac G5 mod I finished in time for PDXLAN...
http://home.comcast.net/~jefftrexler/applesystem.jpg
Very nice looking G5 :up:
Wowser, not too often one sees a nicely done apple! :up:
Where is the power supply?
Lovin the G5!
@ autobot
Very nice G5
Sorry for the terrible quality, using phone, will try and get proper pictures later, just to give you an idea of my new 800D build :)
http://www.upload3r.com/serve/050211/1296932461.jpg
George, I suggest you read the rules on page one :): No larger than 1280 x 1024 pixel (but 1024 x 768 pixel is preferred).
Am editing as we speak. (sorry)
I know I've posted my build before, but I just had a chance to use a real DSLR camera and I've got some pretty slick shots. Can I post another four or do I have to just post a link to the photo album?
Little update to my rig
I replaced my EK 120.2 Rad with a Swiftech MCR320 and removed the drain fitting. Also replaced my radiator mounting screws with some hex socket cap screws. Using rubber washers between the fans and the rad and the rad and the underside of the top panel of the case, nylon washers on the top. For the new rad, I got some new Thermaltake AF0026 120mm fans.
Ok I'll shut up now, here's the pics :D
http://i10.photobucket.com/albums/a1...g/IMG_0092.jpg
http://i10.photobucket.com/albums/a1...g/IMG_0094.jpg
http://i10.photobucket.com/albums/a1...g/IMG_0085.jpg
http://i10.photobucket.com/albums/a1...g/IMG_0089.jpg
Well, my opteron build is up,
http://img.photobucket.com/albums/v1...teronBuild.jpg
http://img.photobucket.com/albums/v1...akTesting2.jpg
What name shall I give it.... ah, yes, it should be named 'Fatfool's Desktop'.
P.S. yes, that is 1/4" ID 3/8"OD tubing.
Just post it.Quote:
Originally Posted by ScottALot
Um scott, you might want to watch the tubing you have since you're using a rather clear coolant which exposes everything.... It's going to cloud up soon....
That's how you know its time to change the coolant :p:Quote:
Originally Posted by Fatfool
New photos look good Scott.Quote:
Originally Posted by ScottALot
Just go back and delete (or link) the original photos - that way we keep in compliance with the bandwidth guidelines and don't set a precedent. Thx.
On the contrary, it's not the coolant which has turned cloudy but the tubes.Quote:
Originally Posted by KetelOne
Well, yeah... dye does that eventually. But I've been using Mayhem's dye and it's held up pretty good. The camera makes it look cloudier than it really is.Quote:
Originally Posted by Fatfool
DARN!! All of these boss builds have me wondering if I should post anything when I get my next one figured! :shrug: Keep up the good work people as it is awe inspireing!! :up:
dragonhunter, very bizarre setup, what's the point of having the reservoir below the pump level? :confused:
well .... me too i've got reservoir below pump level, once the loop is filled i've got no problem or cavitation issue on the loop, so what's wrong ? O_o
Res MUST be above pump = myth. Everything bleeds and works just fine regardless where the parts are.
Dragon, Please resize your pics per the rules in first post.
@dragonhunter nice setupyou've got but are you sure you set memory up in right channels?
Well, here's a couple of mine. Still not finished, new video card and fan grills on the way. Really wanted to post here and say a HUGE thanks to Waterlogged for helping me in this thread http://www.xtremesystems.org/forums/...=265712&page=2. Also, huge thanks to Sideroxylon and bmaverick and johnny87au. I cannot hear my MCP355 at all at full speed anymore!!! The loudest thing in this setup is the 3 GT-AP15's at full speed, but we all know that's pretty darn quiet. I couldn't be happier with this setup and am very grateful to all the great people here at XS.
http://img220.imageshack.us/img220/2478/rv0200.jpg
http://img841.imageshack.us/img841/9964/rv0201.jpg
Quote:
Originally Posted by AcidMaxx
Cause its much easier for me to fill and drain, all I just sucked coolant out using a syringe and all coolant just flown down to the Res
Quote:
Originally Posted by MythSquare
Isn't that in dual channel? I just used dimm 1&3
Didn't see your post for a while, thanks Shazza for allowing me to do this. The last post was deleted.Quote:
Originally Posted by shazza
@dragonhunter If it's Asus P8P67 Deluxe mobo, check the manual cuz I think it's a 2-4 a dual setup.
Nay, it does not have to be so.Quote:
Originally Posted by ScottALot
after one year of usage:
http://img.photobucket.com/albums/v1...upP1020954.jpg
http://img.photobucket.com/albums/v1...upP1020952.jpg
Fatfool pretty clean after a years usage mate!
Here are some pictures of my temporary watercooling setup. I am still awaiting parts but i HAD to put it together anyhow...
http://img717.imageshack.us/img717/2987/shinbo1.jpg
http://img268.imageshack.us/img268/192/shinbo2.jpg
Yeah Fatfool, how'd you pull that off?
Quote:
Originally Posted by MythSquare
either 1&3 or 2&4 should be dual ;)
Here are 4 shots of mine baby, enjoy:
http://img715.imageshack.us/img715/8797/dscf4168p.jpg
http://img135.imageshack.us/img135/2325/dscf4169s.jpg
http://img818.imageshack.us/img818/2450/dscf4189u.jpg
http://img818.imageshack.us/img818/3985/dscf4190.jpg
You want see more, PM me for link to my worklog.
nice build!!!! i like the colors
Nice :)
mac1as:
See your work. I feel refreshed.:)
Quote:
Originally Posted by Johnny87au
1. Feser Black (No flaming please!!!)Quote:
Originally Posted by ScottALot
2. B-44-3 tubing
3. Dark case (no lights or windows)
4. Not caring about what my loop contained
:ROTF:
No gunking either. And I flush my loops with tap water before sunning them. (The tropics are great for sunning radiators!)
Johnny, you know, I'll be down under (sydney) in approximately.... five days time for studies. Want me to send you a segment of that used tubing up there? I've got to visit the post office to familiarise myself to the area and street addresses (State?! City?! Suburb?! What in the world are those?! :confused:) anyway, seeing how ZOMG! :shocked: the retail prices of stuff is in sydney.
wow m1acas very nice build, That case is a pain in the ass to get cable management correct and you pulled it off, nice one!
@fat oh yeah thats awesome dude, you going to university?? Suburb is what town you live in, For example i live in Eaglevale... State is whole state so i live in NSW, then you have QLD, South australia etc etc... And city is the city you live within NSW, so mine is SYDNEY :)
Done!! :clap:Quote:
Originally Posted by mac1as
The Byter,
Looks very nice :up: but as the rules stated 4 pictures per a case:
Four Simple Rules:
1) No larger than 1280 x 1024 pixel (but 1024 x 768 pixel is preferred),
2) The limit on the number of pictures is 4 per case (if you want to post more than 4 pictures, use thumbnails or post links without using the IMG tags),
3) Do not quote images,
4) Finished cases only, no work-logs.
Optionally, it would be nice if you could list your water cooling components.
sry - fixed
Now that I'm recovered from PDXLAN 17, I have installed the Sapphire 6870 that I won in the BF Vietnam tourney.
http://home.comcast.net/~jefftrexler/g5new2.JPG
http://home.comcast.net/~jefftrexler/g5new1.JPG
Quote:
( by KetelOne)Looks great Diesel! Do you have a work log? I would love to see how you did some of the mounting :)
Nice! :D
+1 for the work log, also. :yepp:
+2 ;)Quote:
Originally Posted by zalbard
count me in :up:Quote:
Originally Posted by jedihobbit
@Diesel83, Love the build and color scheme! If you don't mind me ask how did you get that color liquid, and what size tubing is that? It's very similar to what I had in mind for a build of my own, and it would cut out a lot of trial and error on my part. :)
And two photos of the UV LEDs turned off and incorporated on the motherboard. (All photos without :down: a tripod :shakes: )
http://img810.imageshack.us/img810/5731/dsc5309.jpg
http://img812.imageshack.us/img812/9839/dsc5441w.jpg
EDIT by shazza: beautiful build, Diesel, but please note thread rules limit to 4 images per case. Have changed to links.
--
Edit :) @jedihobbit - this is a Feser One Blue UV and Tygon 9,5/15,9 :up: (great tube)
Wait why was my post made as Jedihobbit's, I wasn't requesting a worklog.
:shrug:Quote:
Originally Posted by SyniKal
OMG Diesel83, great rig you got there! Congratulations dude!!!
Great photos by the way!!!!!
That's one lonely barb fitting :p:
I noticed the stock 140mm instead of the barb...
http://www.frozencpu.com/products/76...?tl=g36c15s775 ?
Great build! Very clean and great attention to detail.Quote:
Originally Posted by Diesel83
@ amajed ......and I see red!! :clap:
lol it was me asking about the tubing and color :p: but thanks a bunch regardless. I have never seen Feser One Blue look that good, didn't spice it up or anything?Quote:
Originally Posted by Diesel83
Please do not quote images.Quote:
Originally Posted by theseeker
lol ... hey guys, sorry about the confusion on some of the posts regarding Diesel's build. I was merging several posts into one to clean up a bit, and lost my wireless connection. Upshot was, people like Diesel's build a lot ... many would like to know if he has a worklog, and someone was asking about tubing ;)
If you've further questions for Diesel, please PM him.
Oh yeah, 10 demerits to theseeker for quoting images ( ;) )
Sorry Shazza!Quote:
Originally Posted by shazza
My fingers are numb, it has been cold!
http://img.photobucket.com/albums/v4...n/DSC02608.jpg
Please note, no scotch, no cigs, just a small Terrier!
Yep, I am EXTREME!
Dude, I would actually be warm in that picture...without the jacket. I'm in Buffalo and right now it's -2° C with a wind chill of -10°C...and it's been like this all week. http://www.thesmilies.com/smilies/expressive/cold.gifQuote:
Originally Posted by theseeker
when I added the cover over the GPU I couldn't use the Comp fittings becoz they are thick . I think I need an extender or something .Quote:
Originally Posted by matt220
I thought if I put a red one the red will be all over the place , so I stocked with the black one ;)Quote:
Originally Posted by ScottALot
Dude, that's short sleeve weatherQuote:
Originally Posted by Waterlogged
Perfect for sunbathing, you mean. :DQuote:
Originally Posted by melle.k