Printable View
I have a 3500+ 90nm and this NEO2 baord on topic here...
Wheneven i set my VID voltage to 1.55, i get 1.55v to my core.. but whenever i set it to say, 1.55v then set the overvolatage to say.... 5% over VID, i get liek 1.43v...WTF? basically, the overvolatge isnt working..
anyhthing i se it to just lowers it, im useing the 1.4 bios, off MSI site..havent tried a Beta BIOS yet..
BTW: im currently running
220Htt, 5x LTD, 10 multiplyer, (i just read that if i use Pageup i can change it, so ill try tonight)
2400Mhz
DDR@ 220Mhz 2-2-2-6 2.65v (seems to be overvolting by about .09v)
Make sure the cables are in the right direction or your floppy is dead....happens a lot of timesQuote:
Ive purchased the neo2 after reading this thread But when i connect my new floppy drive ... nothing happends.
I can see the floppy drive in "my computer" but when I dubble click it , it tells me to put a medium or something else in the drive ?
But there is already a floppy in the drive ?
ok, i bummped it to 2.5Ghz last night,
228x11, 4x LTD, 1.55v (still cant use the +3.3%, +5%, it seems to lowerd the votlage..) But CPU-z Is reporting only 1.47v to CPU? This its reading it wrong? So where is the the point to read PCU votlage with a multimeter anyway? I want to get accurate results...
http://stresstest.2y.net/images/dbb/0501.jpg
Welp my buddy just got this today at his work here in WA.
We only had a few minutes to toy with it and managed a post @ 2.6 10x260 1:1 3xHT but he has Kingston hypercrap ram 3700 with an SPD of 3-4-4-8. So it's nothing spectacular. As I said, we only had a few minutes but 240 seemed pretty happy. He'll be on later and we'll see what he ends up with.
-----------------
On my rig I have a 3K+ week 47TPAW running @ 2.61 with a 290FSB 1:1 using the OCZ 3200 plat rev2. Very happy so far. It's been folding for about a week solid, no burps. But I am having problems with my BFG5900u and blue screens when gaming. The windows reporting always points at either the graphics drive specifically or a driver in general. Anyone with known issues on that? Maybe a work around?
http://stresstest.2y.net/images/dbb/AMDOC.jpg
*Sup KillaBee, just saw your post :P
but 1.6v @2.6GHz is kinda lukewarm
Yea, I agree. But the purpose of the post was to ask for help (possibly) with the video issue. I added the caps so ppl could see the specs incase it would help.Quote:
Originally Posted by mata2974
This wasn't intended as penis shaking ;)
sup :)Quote:
Originally Posted by STRESSTEST
but seriously, dose anyone have an awnser for me? I amy RMA it, iv tried liek 5 BIOS version now, none seem to make my +3.3 really add votlage, all of them make it run low?
And dose someone know where i check the Cpu votlage with a DMM?
My PSU is a antec 550watt, moded rails, 3.42v, 5.25v, and 12.5v...mild but good, that under load... So i dont think its my PSU doing it...
I got a screen shot.. dont mind the low HTT, im working on a max CPU then ill max that out with my TCCD... but seriouslty, its set to 1.55v inthe bIOS, and if i set it to auto, then it says, 1.52v!!!!!!!! arrrg that annoying... ..weak IC mabey?
http://server3.uploadit.org/files/KillaBee-3500.JPG
Hey Stresstest Where do i know you from, its somewhere i know! Errrrr.....
for some reason, a blue anodized Lian-li is comming to mind???? u perhaps?
editl i JUST REFRESHED MY SCREEN, AND YOU SCREEN SHOTS WENT BYE BYE....!!!!!!!! LOL
hmmm, i just set everythign to stock... and CPU-z and the BIOS both are saymy core it now 1.35v.... WTF???
200HTT, Auto CPU votage, 200DDR 2-2-2-5 1t, 2.7v DDR, 5x LTD
What do you think about it ??
297 2,5-3-3-7-1T
http://img.photobucket.com/albums/v3.../spi1mb297.jpg
nice! can you now, jsut get that multiplyer up and get some real Mhz out of and you will be kicking a$$!
I just re-read the tips for this baord, i must have missed the part that says, this baord is undervolting about .1v on 90nm cores...Maby why mine is low...
can anybody tell me how can i read the vdimm to see if my ocz booster is giving me the right voltage cause i think he is making me trouble
Quote:
Originally Posted by I(illa Bee
Exactly, the [H]
Just got my Neo2, all i can say it GREAT board....there are a few issues that bother me....I dont like the placement of the CPU at all....its like right over my Video card core. I dont like the way they put all the IDE-Floppy-Power connectors all in a line on the side of the board. That took me the longest to get them all in.
So far im pretty impressed with this board. I came from a A8V too. I wanted a Nforce chipset really bad since I had such good luck with them.
I need to do some more tweaking, but so far im over my max stable overclock with my A8V. :banana4:
I have news. I read here that the XP-90 wouldn't fit on the MSI K8N Neo2 when also using Corsair Pro memory (the ones with activity leds). Well, since I got the memory a while ago and I decided do that upgrade without knowing this issue, I was ready to check for myself that, now the news: The Thermalright XP-90 DOES fit on a MSI K8N Neo 2 Platinum when using Corsair Pro memory, I'm using a pair of 3200XL Pro memory, the space left between the memory and the heatsink should be about the thickness of a common CD.
However, and don't see the point to use this memory with this setup, the leds can't bee seen since they are totally covered by the XP-90. Well, if you try to look at them through the heatsink you would.
This MSI is driving me nuts.. :mad:
270HTT 1:1 .. stable
But if I run 183, 166 or 150Mhz divider I cant run more than 220Mhz on RAM.
250HTT 183 div = no go
260HTT 166 div = no go
265HTT 150 div = no go
Im using a Winnie 3200+, and I want more than 2700Mhz. Therefore i need the dividers, but this mobo wont do it. The chip is good for 2900+Mhz under a 404a mach2.
Its a 0411 with Korea 0441 chip. What kind of crap mobo is this??
Worst 1200.- NOK (200$) i ever spent.
Maybe I should get another one? A China maybe?
yeah, thats one thing that just about everyone hates :stick:Quote:
Originally Posted by HighLife
i have the same problem but i dont think it is the board ithink it is the ram and the memorry controler. when you set the memory to 1:1 200/200 the spd of th memory is differnt from the one 200/166 200/133 and etc obvioslyone of the memorry timing is too agressive at 166 and 133 and we can`t do more than 220mhz. for a pity this memory setting is not listed in the bios not even in a64tweaker cause i tried all kind of settings and still no go. iam using 2x256 bh-5 ramQuote:
Originally Posted by Formann
when i use my pmi turbo ram i still have the same problem but it is not that worst i can do 240mhz prime stable.
what is your ram anyway
can anybody tell me how can i read the vdimm to see if my ocz booster is giving me the right voltage cause i think he is making me trouble
IM using PQI Turbo (TCCD-437) and Im at 244 right now....primed last night for about 11 hours at 243x9. It bugs me that im stuck here, but it must be my chip. I have just swapped my A8V for the Neo2, with my Asus i was only able to get 240x9, and it was just a tad unstable......UT2k4 would crash....Farcry also....now i played 4 rounds on UT2k4 Onslaught and it ran right through perfectly. So I turned it up to 245 and before windows screen popped up it rebooted itself....so then went to 244 and have been here for a few hours....just did some Sandra benchmarks, ran Aquamark, 3dmark01 and 05. Going to play poker tonight, but will prime it when im gone.Quote:
Originally Posted by lio
Im running ram 1:1 @ 11-3-3-2.5 and 2.70v.
Quote:
Originally Posted by lio
I have tried 2 different Winnies, and i get the same problem, at the excact same speed. Also i have tried booting with 100, 133, 166 and 200 in BIOS and then adjusting the mem-speed from A64 Tweaker. I have tried different setting in the tweaker for 2-3 days now. No difference.
With a China mobo you can make high htt + divider work if you boot with 1:1 and then set divider with tweaker. One of the differences is read premeable which is higher when booting with divider. 5.5ns with 1:1 and 7.5 with divider.
Im using 2x256 Twinmos BH5, but i have tried some Advance PC3200 also with the same crap result.
Im gonna buy another MSI. A china or taiwan. Hopefully it´ll let me run 295*10 with 183Mhz divider.
Euhm i tried both directions on the floppy . On the mobo there is only one possible way to connect it. The floppy is new so i dont understand it.Quote:
Originally Posted by mata2974
Maybe something in windows or some drivers ... ?
*edit*
Soz forgot to enable ,floppy seek in the bios. :)
Ps: How far are the corecenter temps correct ?
I finally figured out an oc'ing problem I was having with my 3200+ on my Neo2. I have three sata HD's, my main windows drive is on sata3 and my two storage drives are on sata1 & sata2. With my Gskill LE I can get it to boot into windows 100% stable at 240 1:1 with all drives connected. If I go one Mhz over 240 it will hang everytime at the windows xp logo. No matter what I do it will not get into windows.
Now If I don't have any of my storage drives hooked into sata1 or sata2 I can take the chip all the way to 265FSB 1:1. This is bumming me out cause I am down one whole HD in my system. Does anyone know a way around this. I am using bios 1.36B
Granted, I am a newbie at overclocking... but I cannot seem to get this system stable at anything above 220MHz. I have also failed to get the RAM running at the advertised 2-2-2-5-1T @ 200MHz, 2.75v -- it will always fail Prime95 Torture Test.
1. I am running the RAM at 2-3-2-5-1T @ 215MHz, 2.75V -- rock-solid and stable. Ran Prime95 Torture for 11HRS, ran SuperPI successfully on several occastions and rounded this out with 3DMark05.
2. I have tried increasing Vdimm (to 2.8v) and Vcore (to 1.6v), reducing HT to 4x and even reducing the multiplier to 10x to make the processor run at the 2.2GHz it's supposed to run at... and no dice? It will ALWAYS crash in 3dMark05.
Ideas? Suggestions?
Tx.
- Speedi
Dose it post 2-2-2-5-1t, and fail in windows? Also that memory has Samsung TCCD chips on them, a lot of the time it dose not like voltage at all...try running it 2.6 or 2.65v. There are many that overclock way better on less voltage…I’m talking 260+ on only 2.65v…so give it a try..Quote:
Originally Posted by Speedi
Also my board under volts my 90nm core a lot. So your CPU might not be stable at stock clocks, due to low voltage, try upping the voltage, My BIOS reading were accurate to what my multimeter told me my CPU voltage was…
Ummm… you have a 3200+ the stock multiplier is 10, you cant go higher, than 10, and you CPUs stock speed is 2.0Ghz, not 2.2, and no one is guaranteeing you a free 200Mhz. Also again, go in a look to see what its reading you CPU voltage as.. Ill bet its a lot lower than 1.6v, I have mine set to 1.55 with the +10% and I only get like 1.63v, I cant remember......Quote:
Originally Posted by Speedi