Printable View
My 165 CCBBE 0610DPMW at 3025MHz. I haven't had much time to mess with it but it seems completely stable at these settings. If I loosen up some of the memory timings, especially Read Preamble, it's stable on less voltage.
Database info:
165 CCBBE 0601DPMW
3025 MHZ
1.525V
35C Loaded
Storm R2 Cooling
Prime Stable 12 Hours
http://img132.imageshack.us/img132/3...test6dk.th.png
Nice results! What program is that btw on the right?
Thanks.Quote:
Originally Posted by Repoman
It's Samurize. It doesn't look like much right now. I'm still configuring it and working on the layout.
Damn, that program is sick. Nice find. Your setup makes me want to get a WC setup. Time to research WC, whoopie...Quote:
Originally Posted by Praz
Yea, I was trippin out for a quick minute.Quote:
Originally Posted by thunderstruck!
And I think most systems work the same, where the difference(or delta) between ambient temps and idle temps will make voltage vary. Since my ambients suck a$$, especially in my horribly ventilated apartment, it is effecting my voltage. I actually think I have to raise my vcore again, probably to 1.4V:( Lower temps does equal stability, but a higher ambient temp will result in a higher voltage requirement which = sux to live in southern california...well, kinda, it's nice to be able to snowboard and surf in the same day:woot:
I think that my rig needs to be irrigated like the rest of my state...:fact:
http://img141.imageshack.us/img141/9...52813753wb.jpg
still going if my mobo allows.
Just a question as I´m about to buy one, does anyone ever saw a CCBBE 0610DPMW not passing 2,7 ghz on stock volts? I´ve only saw great oc from this stepping.
Just a quick update because im excited :banana:
This is my first attempt at overclocking anything :)
So my psu finally turned up today and ive got my 165 priming away next to me on the bench as i type this. This is just a preliminary update, screenshots and validations to follow once ive had a chance to play some more. But currently been dual-priming @ 2.5ghz for over an hour, memory running at 227mhz and on stock volts currently. :woot:
[edit]
CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 3, Stepping: 2
Extended CPUID: Family: F, Model: 23, Stepping: 2
CPUID String: 20F32
Processor APIC: 0
Processor: Dual Core AMD Opteron 165 (Toledo)
CPU Speed: 2601.39 (289.04 x 9.0) (got bored after an hour at 2.5 ;) will leave it here and see how we go *fingers crossed)
Revision: JH9-E6
Platform: Socket 939
Startup VCore: 1.350v
Maximum Case Temperature = 65C
TDP: 110.0 Watts
Written by: Arthur Liberman.
Idea by: Petr Koc.
More info at: http://www.thecoolest.zerobrains.com...topic.php?t=83
haven't seen any yet. most are hitting about 309-311 on stock volts.Quote:
Originally Posted by npk
Real easy mod , just buy some conductive silverpaint and dab some on there = )Quote:
Originally Posted by Malkec
might have to scrape the surface a little to get contact.
i dont like to be a whiner, but i was looking on the database on the first page and i have a few concerns:
1. those with unconfirmed cooling should be deleted or moved to a different section. it doesnt help anyone when noone knows what kind of cooling you are using for your results
2. those who arent prime stable should also be in a different section. if it aint prime stable then what good is it? i can bench and browse all day long @ 3 GHz (1.525v), but it fails prime instantly.
3. it would be helpful if the database were sorted by model, then stepping. a legend could be created so users would know whether the chip should be known good, avoid, or honorable mention.
i know this seems like a tall order, but i would be willing to contribute my help towards the database if you would like. thanks.
well, i was going to approach people through PM to get more/updated data on the DB, but i didn't know if that was appropriate, and i've been too busy sitting here doing nothing.
I'm on water, corsair nautilus 500. Please don't delete me:DQuote:
Originally Posted by blazin-asian
well, i created a new table, modified the columns a little, and took out everyone that didn't have complete info, and i was left with 11 entries :(
what a coincidence, i was looking at your results on amdgeeks.net. i noticed u have the same stepping as me and how the heck did u get 2.8 stable @ 1.425v? i need like 1.475 to get it stable. did water cooling help reduce volts by .05? i have pretty good air cooling and dont go over 48c load. whats the secret?Quote:
Originally Posted by The Nemesis
I guess the water did the trick cuz I ran another test after that and got it 10 hours prime stable @1.4v. Pretty sure it would do twelve but I ran out of time and didn't want to leave it on while I was @ work with new water cooling & all.
so whats the highest speed you got out of the 170 then? i noticed your 2.8 entry was a while ago. im currently burning in 2.85 @ 1.525v for now.
btw that is a HUGE dvd collection :)
nemesis i have you with a 170 CCB1E 0609FPAW 2800mhz @ 1.4v on Water prime stable, is that correct? all i need is your load temp to add you back to the list.
Here's my last screenie, the load temp was 49'c it would drop between that and 47'c, so I did the screenie with the highest.
http://img507.imageshack.us/img507/5...0hrs3zt.th.jpg
It got hot here in TX so my attempts to get higher have met with failure. I can run Over 3ghz as well. It even ran loops of 3DMark06 @ 3ghz but prime fails right away. I tried priming @ 2900 recently but once the cores reach +50 for a sustained period it fails. The Corsair water is quick to install but I'm not sure if its up to the task of extreme overclocking or if its just to warm here now.
Updated my 165 info and here's my 170.
Database info:
170 CCB1E 0550VPMW
2950 MHZ
1.58V
38C Loaded
Storm R2 Cooling
Prime Stable 19 Hours
http://img92.imageshack.us/img92/1971/295019fx.th.png
witch Batch? my 0550 VPMW 1.420v@2.95g ( air cooling) :stick: your chip hing vcore. try low vcore?Quote:
Originally Posted by Praz
It won't do it.Quote:
Originally Posted by 865pe
i have one core stable up to 3151mhz, but the other is only stable for 20 mins at 3.1. dammin thing.
Just got my Opteron 170 today. Can someone tell me the usual temps @ idle and @ load using a stock cooler? Thanks!
Nice :D I'm about the same, 3.1 with 1.47v 24/7. I can run 3.15@1.52, but choose not toQuote:
Originally Posted by ncc-1709
Still burning in, tough finding a good spot though since it's either stable or locks up :stick:
i couldnt hit 3 ghz! i was so close just needed another 2-3 mhz bump on the HTT to get it there but nope. owell. repo thats awesome . my chip needs like 1.525 just to be 2.9 stable. u got 1 hell of a chip.