Printable View
Here a small update:
http://www.xs4all.nl/~famchow/A64_30...e/3000_mpm.jpg
MSI NEO4 ULTRA 1.2B
2700MHz @1.55v @BOXED AIR.
Under Prometeia MACH 1 R507 (DISPLAY= -43)
http://www.xs4all.nl/~famchow/A64_30...Prime_2.95.jpg
This is prime stable, but my HTT is crap at that speed. Sometimes I get BSOD.
i have it 1 day[1.36b] only man still searching :) . . .Quote:
Originally Posted by vlad
I need good memory to push my winnie above 2.8ghz@ 1.6vcore
my memory is noname 512*2 dual . at 210 craps , and 323htt hits the wall , no divider works ,,,....
at 2.9~ with my horrible sticks is only printscr stable :) :banana:
my winnie map is
undervolted[from bios] till 2.6ghz [1.37vcore 1.40]
default vcore[from bios] [1.44~] does 2.7ghz
and above 310*9 2790 ask to much [the memory i think ]
Lots of great overclocks here. It's so intersting how much these chips can vary even on same week.
Quote:
Originally Posted by Juliette
I don't know I hate sandra :stick:
Yesterday i have buyed a new winchester. The stepping is 0448 rpmw. 2300 1.4v is prime stable more mhz is dosen´t stable. 2400Mhz 1.5v i become a error message after 15mins.
My friend has buyed a 0448 spaw and the cpu runs over 2,8ghz with 1.53v on prime. I hat this guy ^^
http://members.cox.net/billz1rtc/9x314%20super%20pi.JPG
:banana: I finally broke under 30s. :banana:
Another from my week 48 SPAW on the DFI
http://img.photobucket.com/albums/v2...on100/2800.jpg
After hours of stress at 2.7 1.44vcore , my winnie now does 2.8 at 1.57~ vcore
[1.575 from bios]
the only part i miss is ocz el rev2 :banana: :banana4: :banana:
Glad to hear it bro! :toast:
any faster winnie out there ?
http://www.xtremesystems.org/forums/...id=24449&stc=1
http://www.xtremesystems.org/forums/...id=24518&stc=1
:toast:
Thanx mate :toast: :banana4: :toast:Quote:
Originally Posted by vlad
a few answers now from your question about 1.36b.
1. I flash it from win [because im not trust my floppy] with no prob with winflash 1.0.0.1 [award]
2. 1.36b is more stable at high fsb .
3. It has new choises in vcore section . +13% +15% +18% !!!!
4. The bug from previous bios 1.4 we have that when you press enter 2 change multiplier the bios freezes [the only way was with pup pdown] is desapear .
and searching.
Outstanding :toast:Quote:
Originally Posted by The Byter
the vcore at cpuz is right :slobber: or shows slower ?
whats your memory ?
for air , or water you was previous whats the number of mhz bonus of the -60?
:toast: Very nice indeed! :toast: :slobber: Dame i may have to fire up my chiller sooner them i thought. Congrats again :up:Quote:
Originally Posted by The Byter
Cpu conditioning (burn in) works with a64 winchesters?Quote:
Originally Posted by Athens[2004]
this just arrived!
ADA3200DIK4BI
CBBID 0501DPFW
1182947A50613
i hope its a decent one!
CBBID suXXXXX :bananal:Quote:
Originally Posted by Jethro
not sure so far 2.6 seems to be my ceiling testing now @ 277 x 9.5 1:1 4x HTT
CBI reports the chip to be .09 SOI?
Sorry, I haven't read the whole Thread :bows:
Is there anywhere information about the best steppings for Winnies?
Thx!
Interesting.. very interesting this burn in thing..Quote:
Originally Posted by vlad
how do i burn in a winchester with msi k8n neo2 platinum and xp-120??
2.7GHz Stable on Air... 1.6VCore
256MB of Corsair XMS3700 (2.5-3-3-10, DDR333)
http://subculture101.com/forum/attac...entid=34&stc=1
yeah so far 2.6 seems to be TOPS even with me cooling @ 18-20c. my max vcore is 1.7 with this board. at least it doesnt mind very high FSB's :D
What can be expected with an XP-90 with Tornado and a winnie 3500+ on an K8N Neo2?
My 3500+ is doing 2.62 GHz with 1.7v stable, is that nice?
so today i get my new 3000+ 0443mpm
Ã:banana:´m very lucky with this little cpu:D watercooled
New top SuperPi Scores. Beaten old scores by using longhorn!!! :D
Enjoy!
http://www.host366.com/pics/superpi.JPG
Alec