***OFFICIAL Asus P5K-E/WiFi Thread

Printable View

Show 100 post(s) from this thread on one page

02-29-2008, 12:15 PM
Rocket

Quote:

Originally Posted by Draxx

Ok no idea what I'm doing here (used AMD for the past 11 years), but priming at 3Ghz (333 x 9) only things I have changed in BIOS are PCI-E freq to 100, FSB to 333 memory to DDR2 800 and some anti v droop thing. CPU-ID reports 1.400v and the clock speed keeps dropping to 2GHz (multi goes from 9 to 6) Speed step is disabled!

So far both cores are at 43C load.

What else to I have to select do on this wintel rig to make it go faster?

Also is it an Asus feature that the power putton has to be pressed twice to post after it has been swiched off at the wall? If the power has not been cut from the wall the power button works first time.....

What bios are you using?
Certain bios wont disable speed step at all.

You have to disable C1E as well.
02-29-2008, 02:51 PM
Draxx

1004 mate.

Ah thats what C1E does. Will it cause issues enabled when overclocking?
02-29-2008, 03:37 PM
Rocket

Quote:

Originally Posted by Draxx

1004 mate.

Ah thats what C1E does. Will it cause issues enabled when overclocking?

Some say yes, some say no.

I always disable it to avoid potential problems.
02-29-2008, 04:02 PM
Cwelle

Quote:

Originally Posted by Draxx

Also is it an Asus feature that the power putton has to be pressed twice to post after it has been swiched off at the wall? If the power has not been cut from the wall the power button works first time.....

Just press it once and wait.
02-29-2008, 07:56 PM
GoGoGadget

Are you guys using the Asus drivers from the cd that came with the mobo? I've read that the Asus Wifi-AP solo driver is terrible and that I should use the Realtek drivers. Can anyone comment on this?
02-29-2008, 11:28 PM
anomalos

http://www.pctunerup.com/up/results/...2256_505x7.JPG

bios 1004
Start the test at 505x7 , great mobo

:)
03-01-2008, 02:51 AM
Cwelle

Quote:

Originally Posted by GoGoGadget

Are you guys using the Asus drivers from the cd that came with the mobo? I've read that the Asus Wifi-AP solo driver is terrible and that I should use the Realtek drivers. Can anyone comment on this?

Download all the files from here: http://support.asus.com/download/dow...=P5K-E/WiFi-AP .
03-01-2008, 08:50 AM
vocch

Quote:

Originally Posted by CrazyNutz

Here is the problem explained:
The mobo will set the mem timings/frequency according to what the SPD
on your mem modules say. So if you have ddr2 800 4-4-4-15 the mobo
will indeed set it up to this spec, but here is the problem it will only provide
it 1.8 volts (based on the DDR2 JEDEC specification). This causes the black
screen no post because your memory manufacture (Like most performance
memory manufactures) can only provide those frequency's, and timings if
the memory is overvolted beyond the DDR2 JEDEC specification (i.e. 2.0-2.1v).

I fixed mine by modding my SPD so the mobo thinks my mem is ddr2 667mhz instead of the actual ddr2 800mhz. So If it boots up and tries to set the mem
timings/frequency/voltage automatically it will only set it to 667mhz which
works fine at the standard 1.8v. Im now able to set the timings/frequency/voltage manually in the bios to 800mhz 4-4-4-12 2.1v.

So here's how you fix it google SPDtool and DL it.
Run it, go to file, and select read (chose one of your highend mem modules)
Save this as your orig SPD
now in the bottom pane scroll down until you find:
"SDRAM Cycle time at Maximum Supported CAS Latency"
Change it to "3.00ns (333mhz)"
Save the new SPD and write it to your mem modules.

Good Luck:up:

Thanks very much CrazyNutz. :up:
03-01-2008, 12:01 PM
BarboneNet

Quote:

Originally Posted by anomalos

http://www.pctunerup.com/up/results/...2256_505x7.JPG

bios 1004
Start the test at 505x7 , great mobo

:)

viva la patata ;) nice result friend:up:
03-01-2008, 12:50 PM
GoGoGadget

Quote:

Originally Posted by Cwelle

Download all the files from here: http://support.asus.com/download/dow...=P5K-E/WiFi-AP .

Which drivers should I download?
03-01-2008, 05:08 PM
Cwelle

Latest. :)
03-02-2008, 10:57 PM
Leon939

i have quick question.

my system always unstable (BSOD) when i used 4Gb, why ?

super talent PC6400 (4-4-3-8) and Crucial PC8500 (5-5-5-15)

all ram @ 1200 (5-5-5-15) with 2.2v

and 8400@ 4.005 (445x9) set 333 => 10xx (5-5-5-15 at 2.2v)
03-02-2008, 11:54 PM
waynetu

Normal Issue
03-03-2008, 12:11 AM
Cwelle

Northbridge works easier with 2 memory modules than with 4. Try raising voltages.
03-03-2008, 08:41 PM
golfjam

Can I run 2 x hd3870x2 with this mobo?? Thanks.
03-03-2008, 08:50 PM
g1raffe

Quote:

Originally Posted by golfjam

Can I run 2 x hd3870x2 with this mobo?? Thanks.

yes you can, however the 2nd card/PCIe slot will only be run at 4x.
03-03-2008, 09:11 PM
golfjam

Quote:

Originally Posted by g1raffe

yes you can, however the 2nd card/PCIe slot will only be run at 4x.

Thanks for the reply. Does it make a lot of difference?
03-04-2008, 02:37 AM
victorator

Just a quick update. Maybe it will be of interest for someone wondering how well 8800gts scales in 3dmark06 when overclocked.

Here are the stock settings 675/1674/900
http://image.bayimg.com/lajphaabb.jpg

and here are the overclocked settings 750/1860/1100
http://image.bayimg.com/lajpkaabb.jpg

I haven't tried higher settings. These seem rock stable without overheating the gpu too much. The temp reaches 79c versus 76c without overclocking.
03-04-2008, 05:59 AM
Lil'ManComputer

Hi!

Is there any new( or final 1006 ) BIOS for the P5K-E/Wifi? Since I flashed the 1006 beta I've got some problems with my mobo. Sometimes it dose not start when I press the power button,and after a CMOS clear it starts. Even after some reboot sequences the RTC shows false time( in Windows and in BIOS as well ), it differs from the actual about 30-60 min. Has someone experienced such things? I have no idea, that my mobo went wrong, or its just a BIOS bug( I hope its just the beta BIOS ).
03-04-2008, 06:54 AM
victorator

Quote:

Originally Posted by Lil'ManComputer

Since I flashed the 1006 beta I've got some problems with my mobo

Would be nice if you provided your system specs : >
03-04-2008, 07:52 AM
Lil'ManComputer

Quote:

Originally Posted by victorator

Would be nice if you provided your system specs : >

oops:D yes of course, here it is:

q6600G0 @3,2(8x400)/1,28V ( fft stable )+TRU120X
ballistix 1066 on spd/2,1V( i.e. 5-5-5-18-40 -blend stable)
p5k-e wifi
(
every voltage of the board on the minimum,
except the N/B = 1,4V& PLL=1,6V
load line calibration enabled
dram static read control disabled
pci-e freq 100 mhz
the others are auto
)
Gainward 8800 GTS 512
corsair hx620
samsung sp160

It was totally stable with these settings with former BIOS releases. I tried to mess around with some other settings, and tested again the old( written before ) with prime, no errors no warnings. The errors( no reaction on closing the power jumper, RTC clock failure ) are produced randomly.
03-04-2008, 08:14 AM
victorator

Have you tried setting the voltages to AUTO except for cpu and ram?

Another guess, try 5-5-5-15 instead of 18? 40 doesnt divide by 18 and I read somewhere on this forum that the biggest latency should be the sum of the first 3, which in your case(mine too) is 5+5+5=15, but that is only a guess as it worked stable with the previous bios.

I would try 2.2 on ram(even though it is rated 2,1) @ 15-5-5-5 rest on auto. Set all voltages to auto except for cpu and ram. Worked in my case although I had to pump the volts on ram to 2,25 for my 800 stick to work fully stable @ 950.
03-04-2008, 09:25 AM
Lil'ManComputer

Quote:

Originally Posted by victorator

Have you tried setting the voltages to AUTO except for cpu and ram?

I tried to mess with BIOS settings, so i think that its not the source of the problem. I'v tested it a lot, and no errors so far, its just randomly no turning on and changeing the clock, i aint got an idea, what coud be the cause of this. May the battery be low?
03-04-2008, 09:36 AM
victorator

It might be that when you change the settings often, and leave some of them on auto the previous ones are saved instead of the BIOS detecting them. Maybe try leaving the current settings for the next few shutdowns/power ups and see whether the problem still exists?
03-05-2008, 06:31 AM
Lil'ManComputer

Quote:

Originally Posted by victorator

It might be that when you change the settings often, and leave some of them on auto the previous ones are saved instead of the BIOS detecting them. Maybe try leaving the current settings for the next few shutdowns/power ups and see whether the problem still exists?

I dont changed my setting for a week ago. Except the CMOS clear( once on the weekend, when the machine didnt turned on all the same I pressed the power button), but after that the OC profile was set, so often BIOS setting changes could not be the problem. But I observed, that the latency of the CMOS clock is appears not randomly, it just seemed me as it were random( cause I turned on my computer randomly ). It has a constant latency, about one hour 4-5 minutes! :( Has someone seen such so far? I have experienced such things when my battery charging level got low in my wirst watch. Could be the situation the same with my mobo? :confused:

Show 100 post(s) from this thread on one page