No typo ..checked twice its really CBBGD. Why you ask?Quote:
Originally Posted by A_X
Printable View
No typo ..checked twice its really CBBGD. Why you ask?Quote:
Originally Posted by A_X
CPU: 3000+ 0443 MPM
MOBO: NEO4 Ultra (1.3B)
MEM: 2x512MB GSKILL PC4400 (431) 2.75v
COOLING: BOXED
http://www.xs4all.nl/~famchow/A64_30...7GHz_boxed.JPG
:cool: :cool:
Damn.
My CBBHD 0446 SPAW (x5xx) doesnt look too good :(
~2300mhz
I think this is stable, though not sure yet, have to flash the new DFI BIOS.
http://www.overclocking.dk/img/users/36815_02.jpg
My Gskill LA does 2,5-4-3-7 DDR600 though :D 1GB kit..
No reason, just suprised that an SPAW with a batch that low performs so badly...Quote:
Originally Posted by Feinripp
Oh and the store where I wanted to get my 0449GPHW already sold it... :( So I got myself a 0446XPAW. No idea if it is any good tho... Was a bit of a gamble. It should arrive on monday...
Winchester 3000+
CBBID 0502 APMW
http://img228.exs.cx/img228/7352/300...apmw8iz.th.jpg
Mem : 256x2 Corsair XMS 4.1 (TCCD)
Cooling : Stock HSF
http://www.xtremesystems.org/forums/...id=24429&stc=1
not bad is it ?
i think its pure luck..hope your xpaw is a lucky draw..Quote:
Originally Posted by A_X
it drivin me nuts..
Hm, possibly i have a problem with that cheap Rams i use. What if these Ram just dont like high divider (133/100) at high HTT´s I played around with the A64tweaker and the thing is: at memdivider 133, and also 100 the system refused to boot, so i bootet with 260x9 /ram on 166 divider save, and in windows i dropped the memdivider from 166Mhz to 150* reserved value. (whatever that means)
And then raised the clock up to 293 Mhz with clockgen. Now the ram runs @220 Mhz(upper limit of ram) 2640 Mhz 293x9.. stable at first look...
if i set 293 HTT, and divider 133 (should give around 190Mhz) in the bios .. the beast not even boots.
Now i must set manually all that stuff under windows to reach this clock..
:brick:
Looks llike the TakeMS Ram fooled me by not accepting lower dividers..seen that before? There is still light at the end, should i go for g.skilll rams?
:toast:
CPU: 3000+ Winnie 0444UPAW
motherboard: Neo2 Platinum
Memory: 2x256mb PQI Turbo 2.5-4-4-8 stable @ 1T (not stable at 2.5-3-3-7 @ 1T only at 2T)
Running 1:1 ratio with no divider DDR 570 Vcore 1.6v and prime stable for 22hours + Will do more testing but as of now it's still good to go.
http://img.photobucket.com/albums/v9...erclocked1.jpg
Mine 3000+ works under the prometia. :D
3000+ 0443 MPM
MSI Neo4 Ultra
temps windows -20C.
24/7 rock solid settings :cool:
Somewhat stable in windows but not bench stable. Needs more vcore, maxed out in bios but undervolts .1v, Need vcore mod or better mobo. Idle temp was 38c with around a 17c room temp. Max stable is 9x313htt so far. :)
http://members.cox.net/billz1rtc/9x3...20(Medium).jpg
I have a question:
My CPU is S&M stable @ 2640Mhz, but @ 2650Mhz it freezes after 7mins or so of benching.
At 2640Mhz the max temp is 56c, while in 2650 it goes up to 62c; So I guess that the meaning if this is insufficient cooling.
Do you think this is what's limiting me? If so I'll buy an XP-120.
What are you using for cooling now?
Stock cooling w/ 1.5v + undervolting correction.
I forgot to mention that both of these clocks are 3d and Spi1m stable. 2650Mhz isn't stable through Spi32m, I'm getting the "NOT EXACT IN ROUND" message when encountering iteration 20. I really want an XP120 to give my CPU 1.6v action.
That would be a good idea. My chip is oem so i dont know what the temps with the stock hsf but my 2800+ (754 socket) was retail and if my memory serves my right it would hit the upper 50c range around 2600mhz with the retail hsf. You should make up your sig so people can see what you have to better help you out. Good luck with it & post your results. :)Quote:
Originally Posted by Hombre
1.36b msi k8n neo2 54g on search
Hay Athens how stable is it at 2899mhz and how high does the vcore in 1.36b go?http://members.cox.net/billz1rtc/sup...20(Custom).JPG
0448 spmw 1.4v epox 9nda3+ 2x256 mushkin level 2 3.4v box amd
stable 9*290 1.38v
http://membres.lycos.fr/m4inaction/A...%20(Large).JPG
d@rkn1ko 29s is pretty fast given those clocks how much tweaking did you do to your OS?
win xp pro +sp1
a64tweaker 0.50beta :toast: timming for bh5
Thanks.Quote:
Originally Posted by vlad
But do you think that the heat is limiting me? Last night for instance, my room temps were lower and I recall that my CPU passed S&M at 2650mhz. BTW, do you think that burn-in helps CPU's too?
Nice clocks there ;)
@ d@rkn1k:
Is that patched?
yes :D
30 no patched
Yes i do. A week ago i couldnt boot any higher then 9x317 and it wasnt stable at all now i can work in windows but cant bench at 9x323. I know with more volts and better cooling i could get stable higher. I have a water block, mach1 and a chiller that does -50c but i want to see how high i can get on air first.Quote:
Originally Posted by Hombre
;)
A week ago my highest stable was 2.4 at 1.6v after burning the hell out of the cpu im running prime now at 2.5 so far no errors last week at 2.5 error in 1 min. Maybe ill get lucky :)
Hehe thanks. I'll give mine 2-3 days of burning-in and then I hope for 2.7ghz (DoGMaN has the same CPU as mine and he reached 2700mhz using 9x300mhz, which is harder to get than 10x270 which is my aim) :p:
Yeah, burn in is nice! Mine stopped at 258*9 1,4, now its up to 268*9 1,4 Prime95 stable. Hell, those 9 hours of prime every day help ;)
d@rkn1k0 - I hate you :) Whats your bandwith with that? If SuperPi runs, so does Sandra ;)