How about you sell that 0433 to me? :)Quote:
Originally Posted by Riverna
Printable View
How about you sell that 0433 to me? :)Quote:
Originally Posted by Riverna
Riverna tell us some more. What cooling on what board etc... Thx
Cooled by water. MSI K8N Neo2 and 2x 256MB PC4500 A-DATA 1:1. The 3000+ and the SPMW 3200+ are without the spreader. The other 3200+ run with spreader.
The 3000+ works in my system and the 0433 is selling.
Heres my new oc, im back after a lil time away from the forum. Damn this PSU, whoever mentioned it as the weak point, you nailed it, im feel kinda gutted that i didnt pay another £20 for a 550W+ PSU :mad: But i'll try again when i get a new HDD and slap in my ol' 9600 instead of this power-hungry 6800GT.
Edit: its SPMW0445, and the checksum got messed up because i opened the 2nd copy of cpu-z while the first was on the memory tab. or something. but i can assure you the ram was running 233mhz (maxes out at 271 but mem controller or board doesnt allow above 250 1:1). And why does the NB fan slow down when im running corecenter? perhaps that why it crashes the system after a while? it'd be nice if i could actually control it with this 1.5X bios but ive tried all 3 settings to no avail.
well, tommorow i will get another 3000+
CBBHD 0443 MPM ..... 172
Hope this will be a descend clocker. what do you think?
Yesterday i have testet a 0441 MPMW ... 146. With hs the cpu runs on 2650mhz 1.56v stable.Quote:
Originally Posted by kakaroto
thats quite nice dude :)Quote:
Originally Posted by Riverna
My 0450UPMW number: 40022 runs at 2.6GHz (10x260) runs stable at 1.5V real!!! (SuperPI finished couple of times OK, Prime 9 hours)
But my Muskhkin LVLII V2 (TCCD) seems to be like brakes for my CPU :wierd: (260 CL2.5 4-4-11-1T 2.8V - more V doesn´t help)
I will try to set CL3 to try 3GHz :D
Riding on nF4Ultra-D mobo
I have a 0436 MPM 051 which only does 2550...Quote:
Originally Posted by kakaroto
well, hope that this one will do better then that. Nothing is garanteed.Quote:
Originally Posted by A_X
ADA3200DIK4BI
CBBID 0501CPMW
1126655A50101
Epox 9NDA3+
So far 10x250 PI stable with 1.45V
more update later cause im tired :)
CBBGD0440SPAW 3000+ Winnie here..
Mobo Neo Plat. Korea,
Cheap RAMs TakeMS 2x512MB
I can reach 2430 Mhz 9x270, @RAMdiv. 166 (~225Mhz) Primestable.. at 1,45 V.
45 ° under load..
Funnny: i am not able to add 5 Mhz more although with Ramdivider @133 or even 100 the sys faults with Superpi at every HTT over 270 Mhz.
Booting possible @9x300 Ram @100 but crashes in Pi..
Playin´ with Vcore/Vdimm makes no difference, also switching down RamDivider makes no difference.
What do you guys think, is the cpu limiting or could it still be the crappy Ram? Something like incompatibility between my RAM Mobo CPU?
Makes it sense to invest in some gskill rams or would you skilled peops say, forget it your CPu is almost squeezed out?
Thx
Edit typo..
mine on stock HSF
3200+ 0451 APMW ( i guess - forgot to take pics first - LOL :p: to exited about the board)
TwinMOS 512x2
DFI NF4 Ultra D bios 1/25
Unmodded Antec 430 W PSU ( i should mod this one i guess :p: - look at the 12+ rail :D :D)
http://img201.exs.cx/img201/9853/30sfulllow9yy.jpg
haha need 1.7v just to get 2.6 gig ... :stick:
Wow another sucky 0451 :rolleyes: seems to be a trend :stick:
I just ditched my 0451 apbw did 2.55 max @ 1.7v :eek:
Got a 3000 spaw will update results later
Hmm somebody offered me this one today:
ADA3200DIK4BI
CBBHD 0449GPHW
1169847L40080
CBBHD, low batch nr. Very tempting...
I say get it :D
should i got this one for replacement?
it's
CBBFD 0435TPMW
http://www.newegg.com/app/Showimage....103-500-01.jpg
If your getting that replacement from newegg it won't be a 0435. That's just the picture they used. You will probably get a 0450 or later depending on what warehouse they ship it from.Quote:
Originally Posted by setyotomo
0451 according to flask28.
http://www.xtremesystems.org/forums/...ad.php?t=52840
This one ownes me..
ADA3000DIKBJ
CBBGD0440SPAW
1121719J40031
cant reach 2500Mhz.
Low Batch, SPAW this thing must go..
:bsod:
Is that a typo or is it really a GBBGD?
Need a new psu, 12v is sagging...
I can get 2.4 stable with 1.6 volts but thats the end of line.
k8ns ultra 939
2x256mb mushkin pc 3200 lv 2 (2.8v)
9800pro(softmod gigacube samsung E die bios)
a64 3000 winnie(1.45v) Its a winnie but not a winner :(
http://members.cox.net/wmdieselmc26/2300mhz.bmp
A friend of mine has an 0443. He's in the 2.7Ghz range with low volts (1.5Vish)Quote:
Originally Posted by kakaroto
just ordered retail 3200+ and Giga K8NS ultra! (newegg) I will be watercooling that bad boy somehow! wish me luck!