Printable View
Quote:
Originally Posted by Jupiler
yeah i gues those dancing bannas are going to offend someone.
@grave digger
dude its not that i dont belive you man but you suport your theory with nothing and you act like im some idoit. when i can set the voltages to 1.55v and raise and lower the vid and watch the voltage go up and down in both the bios and cpu-z i tend to believe its working. no need to roll you eyes and act like im stupid cause all im going by is what i see....
peace perc,
m8, plz understand that i'm not an perfect english speaker, and maybe my
words look like "i called u an noob". I'm sorry! But if u forget CoreCenter
or all other Win.-Tools, 1,475V ist the highest option u have in Bios, if u
use the x% , too! Thats all i want to say m8! :)
ok well sorry for over reacting man. im just frustrated with this mb atm and like i siad to me it looked like it was working maybe im wrong wouldnt be the first time. ill try what you said and see if it helps...
thx perc,
If so vid over 1.45 = 1.4, 1.4 = 1.36 and so forth.
After 1.45 need %vid to up vcore, winnie screwiness - think this is sorta mentioned up front on the thread now? (Winnie self-defense mechanism?)
1.36b = 136Mod ?Quote:
Originally Posted by muzz
let me see if I understand...if you set vcore to 1.5, 1.525 or 1.55v it really is just setting it to 1.475vcore...only way t oreally increase vcore is with the vcore over vid..ie 3.3%, 5% etc
I am using 1.36b
well that explains why 1.475vcore and 8.3% over vid gave same numbers as 1.5v with 8.3% and 1.525v with 8.3%
so is there a disadvantage to setting 1.5v w/8.3% over vid..which is what I have ..should I go back in the bios and set it to 1.475vcore w/8.3%
also do you need to set agp to 67 to lock with the 1.36b, 1.37b, 1.41b....or can you leave it at 66???
nope, just get 1.36, 1.36 mod is not the same. you want 1.36, here is a direct link: http://www.lejabeach.com/MSIK8N/7025v136.zipQuote:
Originally Posted by Jeager
oh really? I think a lot of ppl thought what he thought (including me :D) and got the 1.36mod. maybe there should be a link to the 1.36b bios on the first page.Quote:
Originally Posted by DevilsRejection
FlyingHamster I love your sig pic....Hmmm
Also I set AGP to 67 on general principle :D
hehe thnx nealh ;)
perhaps u guys could help me out too. my k8n neo came in, and on the NB it says 0440A2 Taiwan. do u think this should be a pretty good performer?
That have nothing to say. Try it! :)Quote:
Originally Posted by FlyingHamster
lol I will once my 3500+ comes in. :D
I also got the Zalman CNPS7000B-AlCu, and was wondering if I have to take off anything on my k8n neo2 before installing it. anyone know?
which Ram is the best for a non-modded neo2?
TCCD RAM is. Specifically, the G.Skill LE does wonders. That, or the Patriot /w XBL. Each uses the Samsung TCCD chips with brainpower PCB's.
Also, that new OCZ VX, in combination with Boosters are amazing together, so I hear. I've never tried them myself.
What memory dividers the msi k8n neo2 have?
thx
If I remeber correct you can chose 100/133/166/200 and 200 is 1:1
where can i find modded variants bios????
Which bios works with bh5/6?/////
dude just read the first post of this topic!Quote:
Originally Posted by apostglen46
and:Quote:
TIP: bios 1.36b and 1.37 and modded variants seem to work best for bh5/bh6
:stick:
The 1.36b seems to be the most popular ones, followed by the 1.37b, and finally the 1.41.
Yeah loose the top & bottom (bottom extrusions through the holes muck everything up :mad: (much easier to bottom remove b4 you use it, use hair drier on bottom if needed), then replace bottom plate w/ the zalman and screw in the brass standoffs. Assuming you haven't removed the heatspreader on chip should be good to go. While your at it, redo the paste on the NB and maybe lap it? b4 putting it all in the case.Quote:
Originally Posted by FlyingHamster
We await results! :D
Anyone know why developers have not added in original Bios support of the function of ventilator management on NB ?
maybe it has some enorous bug or something?Quote:
Originally Posted by nafigator
im sorry i dont completely understand what your saying. so I need to take off the msi backplate with a blowdryer, then use the backplate from the zalman?Quote:
Originally Posted by mad mikee
Anyone have noticed the problems? I no :D Apropos after installing bios 1.51mod beside me temperature on 10 gr. fell. You else want to change fan? :bounces: