Printable View
Hey quick question, do you guys think an Artic cooler pro 64 will be able to cool an overclocked 165 sufficiently at around say.. 2.8ghz @ 1.45volts(I'm making these numbers up, being hopeful from monarch).
It seems these run pretty hot, and these artic cooler's aren't the best chillers, but think about having the silence under that case! =D
I'm running a CCBWE at 2.8ghz and 1.48v. 24/7 dual prime load temp hits 56°C though.Quote:
Originally Posted by turbox997
I used a Zalman 7000alcu/with DFI RS482 inside an Aspire Q-pack. Opteron 165 ccbwe 0550upmw 1.4vcore 2.6ghzQuote:
Originally Posted by turbox997
http://img84.imageshack.us/img84/343...6526ghz3ek.jpg
I dunno what it is capable of under that type of cooling, but what I do know is that with air cooling, you are pretty much at that core's limit, unless you take off the IHS, but I didn't bother. If you're lucky you'll get to 2.8Ghz.Quote:
Originally Posted by SPivX
Now if you are talking about phase cooling, I would assume 2.9 or 3.0 wouldn't be too much to ask for;)
I need help guys. Tell me something good about this Opty 165 CCB1E 0609FPAW I just got. I can't get it stable at 2.8ghz yet, I'm at 1.52v and it won't prime for nothing. It did 2.6 prime fine with 1.31v, so I don't know what the deal is. I think it might be heat. It idles right now with 1.52v and 2.8ghz @ 40°. Ambient is about 67°F, what is that, about 20°C....
Do I need to keep it cooler?
**Edit: I just noticed its not an "FPAW", Its an FPMW**
Seems that you have hit yourself a nice little wall there...
Heat limited. U can burn it in over night and see. But at that voltage and temp ur done on air.
Think watercoolling will get it higher?Quote:
Originally Posted by situman
so, where do you think i should go to get my 165/170 with good stepping? ebay's typically too expensive, imo.
if i called tankguys/monarch/newegg/etc, would they know what they were selling?
Everyone has been raving about Monarch lately, so I would go with them atm, that is, if you are dead set on buying from an online vendor. You say ebay is too expensive, yet I got my 165 CCBBE 0610DPMV for $310USD...You just gotta be patient and wait for that deal to pop up. Plus, you know for sure what stepping you are getting.Quote:
Originally Posted by -mogwai
Check out this for tankguys to see their latest steppings, and then research 'em. If not tankguys or ebay, your just rolling the dice...
http://www.tankguys.biz/steps.php?os...4656149afa0e32
Tankguys has Retail 165's CCBBE 0615EPMW instock. I received email from them today notifying me he had them. $367+shipping by the way.
Quote:
Originally Posted by Mastactor
good enough for me, =)....until this point, I've been battling with myself between getting a dc opteron or just waiting for conroe...here's the reality of it though.. as much as conroe may be better(if benches hold true), I would probably be spending more on the parts for it, and rumours project that DDRII will go up in price(especially with the patent infringement lawsuit)...so mind as well build another rig, make it DC, call it a day, let things settle after 2 years or so before I get the next gen conroe or "AM3"(whatever's after AM2).
Sorry to get off topic, you guys rock...I've ordered a DC opteron 2 times already, but cancelled the order at the last minute...after my next pay check..I better hold firm.
Do what i'm doing, build the Conroe as a new rig and turn the Opteron into a dedicated cruncher / computer for gaming on the side.
haha, if only I had the funds to play with...or the ebay selling skills. I'd love to do that though. And I can't wait to see conroe overclock results.Quote:
Originally Posted by Absolute_0
wait no longerQuote:
Originally Posted by turbox997
http://www.xtremesystems.org/forums/...ad.php?t=98919
And he's already gone to 3 Ghz on stock volts
Sorry for getting off topic
Back to my 0551, seems I've killed my 0610, but don't know how.
Removed the IHS without problems (it was my 5th one, and have a nice tool that doesn't reach the little chips, can't remember its name), applied AS5, mounted and core1 failed instantly at 2930 where previously it worked fine up to 3000. I thought about bad AS5 apply or unbalanced TT BT, so I reapplied and remounted and suddenly the chip doesn't boot.
It has no broken pins nor cracked core. I accidentally spreaded a bit of AS5 over the little chips, can that be the problem? Of course I cleaned it with Acetone.
BTW, removing the IHS didn't help with temps. And this 0551 is much cooler, like 6-7c, idling at 31-32c where the 0610 idled at 37-38
What can I do? The core and the pins are perfect. I've read with lighter liquid you can cover the whole chip and it works fine, maybe I should try that to be sure there's no AS5? Thanks.
Make sure it's totally clean. Reset the bios. Unplug and replug the PSU. Give everything a "shakedown."
Give it about an hour and try again. I've seen it work! :D
Yes I know positively it will [should] work, but that hour has been three :D
Remounted like 10 times, cleared CMOS each time, ran in safe mode, and more importantly, when I plugged the 0551 without making any of the previous the system booted :(
Anyone can confirm lighter liquid is no harm?, I want to give it a bath to be sure.
was all excited to flash my k8n diamond plus with the new v1.1 bios, and what does it do, drops my fsb limit from 465 to 320!! wtf!? i dont' even have a need to up the vcore at 320fsb. i think i'll reflash back to the beta bios.
Thanks for your help and insite guys.....:rolleyes:Quote:
Originally Posted by Mastactor
i'm sensing some sarcasm there? keep your load temps in the 40s. if you want advice on what your temps should be, make sure you post your load temps.Quote:
Originally Posted by Mastactor
Unless your boards sensor is reporting low then 40C load with 1.52v is great if your using like watercooling or something. I dont see how it could be that cool on aircooling though. On aircooling it should be hitting up around 50C+ at load with that much voltage if your sensors are accurate. Some of the boards like the DFI Expert report up to 8-10C+ low so people that think their load temp is like 39-40C actually have like 50C.Quote:
Originally Posted by Mastactor
Quote:
Originally Posted by ncc-1709
Hmm i have on of those perhaps i should be looking for some cheap mach1 :D
I don't know if the asus boards sensors are off, anyone else know?Quote:
Originally Posted by burningrave101
Ya it idles at 40~42, loads at like 55°C. I have another chip that loads at 58°C (CCBWE 0546MPMW) Its air cooling.
Anyone have comments on the fact that this CCB1E is 0609fpMw, not "FPAW"?
If its a CCB1E, isn't it a good stepping?
Sorry, thought I posted the load with the idle temps, looking back I didn't.Quote:
Originally Posted by itznfb
I can't get an acurate load temp at 2.8ghz, cuz it won't prime for longer than 3 seconds!! But at could be around 55°C