3v was a no go for my card. I didn't get any screen and a trace on the PCB got on fire :D. I had to replace the trace with a wire. So don't try 3v :cool:
I'm out of the race. I cant get my card working with a decent voltage.
Printable View
3v was a no go for my card. I didn't get any screen and a trace on the PCB got on fire :D. I had to replace the trace with a wire. So don't try 3v :cool:
I'm out of the race. I cant get my card working with a decent voltage.
3V is no go on my water cooled Asus.. just crashes about 5 seconds in.
awesome post Johny :)
Would be awesome if a company donated us some cards, I've sworn off buying anymore hardware until I either get a second job or sell some gear :(Quote:
Originally Posted by 2fink
That's pretty impressive even so. I was thinking less than 1 sec for the none phase /DI / Ln2 guys :)Quote:
Originally Posted by STEvil
Regards
Andy
:rofl: I take it for signature if it's ok, made my night :ROTF:Quote:
Originally Posted by Johnny Bravo
So the mem cap mods actually hindered your OC on RAM?
Hmmm, might pull mine off tonight then since im not able to do sweet :banana::banana::banana::banana: all on my memory.
Guess 3V will be my last run tonight, and for February :)
That was a nice setup Johnny, esp the memory containers! :toast:
What happened with the DI loop?
Cheers man, yeah was hoping that I could get alot more from the memory with some cold, guess not.Quote:
Originally Posted by G H Z
The DI loop is currently being put to use on something quite different, stay tuned :)
Seems so, dunno every card is different - Seems the excessive capacitance was not liked by the Qimonda, either that or they have very strict capacitance guidelines. I unsoldered a ceramic cap in that area too and lost it so popped in another one or reasonably similar capacitance and it knocked off about 20MHz :confused:Quote:
Originally Posted by T_M
:D go for it manQuote:
Originally Posted by ultimeus
Cheers Dinos your card was looking pretty crazy too ;)Quote:
Originally Posted by dinos22
Thanks Andy glad to be of service to the UK bench scene ;)Quote:
Originally Posted by zakelwe
hey andy
got any more backup scores mate ;)
card is still alive :D
here is the first run :)
http://img521.imageshack.us/img521/7...intskq3xz9.png
http://img144.imageshack.us/img144/3935/01gf3.jpg
can provide link via PM :)
oh I see what's going on here!
Mr my cards dead - waits till the dying minutes of the competition - magically revives it!! :p:
You suck Dinos :D
rofl hahahah :D
sooo close to G H Z :D
http://img213.imageshack.us/img213/9...0495ct8vf5.png
http://img168.imageshack.us/img168/4169/03yf0.jpg
can provide FM link via PM
so how is that 790i board working for ya ? :p:
donno what you're talking about mate :D
weeeeeeeeeeeeeeeeel time to pack up again
the card is bluescreening at stock settings again :shakes:
*phew*
well tomorrow is still Feb in US so i guess i have another day :D
I'm sorry but unreleased hardware that not everyone can get does not count. So none of these scores will be added :shakes:
Regards
Andy
.
.
.
.
.
.
.
.
Only kidding :D
Regards
Andy
Oh snap I'm running out of time. Time to swap the 3850's for the 8400GS and make a few complete runs. Completely forgot :p:
Adding caps to memory vrm allowed me to go from 450MHz to 535 WITHOUT increasing volts yet :D
I have a feeling zakelwe will have lots of work updating the scores this evening :D
stay tuned for scores
Just finished my first round of volt-mods and booted into Windows at 2.1vgpu and 2.035vmem. Time to start LOD testing, I have 2 hours before I have to start getting ready for a date, this is going to be close :p:
My score with crap memory, whatever volt I fed it it would not go over 450, and that it made at stock volts :- (
http://home.online.no/~kesagen/23172.jpg
Contest or the girl. Contest or the girl :rolleyes:Quote:
Originally Posted by [XC] gomeler
THE OPTIONS!!! :rofl:
haha. seriously though, im out. artifacts right from boot. good luck everyone!
- Paul