Dual Core Opteron Thread #2

Quote:

---

Originally Posted by Kobaltrock

I got it from Monarch last week, it is a CCB1E 0609FPMW.... it was around $275 I think. Dunno what stepping they are shipping now though.

Too bad the :censored: shipping for the heatsink is taking forever, and I have yet to test it. :dammit:

---

im pretty sure you'll like that chip kobalt. i have the same stepping and it does 2.96ghz at 1.4v

Cant wait for my 165 CCBBE 0610DPMW, should be here yesteraday or today, but lets wait some more time :stick: Hope it will be good overclocker and I will get 2.8Ghz on stock vcore :D

Quote:

---

Originally Posted by Kashelz

Cant wait for my 165 CCBBE 0610DPMW, should be here yesteraday or today, but lets wait some more time :stick: Hope it will be good overclocker and I will get 2.8Ghz on stock vcore :D

---

I did that with my CCBBE 0610, I think it scales really well with voltage. So far 2.8 at stock, 2.9 at 1.376v (1.425v in ultra-d, 11/14) and haven't tried 3Ghz, but it looks good for 1.45-1.475v if I keep my temps down. All prime stable too. Currently testing the 2.9 one, been 30 mins.

initially took me 1.55 to hit 3.0ghz on my CCBBE. currently working my way up from 2700. i want to wait for my 8pin connector to see if that help any

Quote:

---

Originally Posted by itznfb

prices aren't that bad. people are finally starting to learn on ebay, nobody is bidding on the CCBWE's and the CCBBE's/CCB1E's are going for around 360-375.

---

Lol then i had to had the biggest luck of my life to get a ccb1e 0608mpmw for only 280$.
http://cgi.ebay.com/AMD-Opteron-165-...QQcmdZViewItem

This is the guy i got my chip from.


865pe
You run your opty at only 2800 for 24/7 ? I run my at 2900 @ 1.4v and works perfectly. Would need more than 1.4v to hit 3ghz, but i would have to make a vcore mod.

thats a killer deal man, you should be happy

Quote:

---

Originally Posted by Malkec

Lol then i had to had the biggest luck of my life to get a ccb1e 0608mpmw for only 280$.
http://cgi.ebay.com/AMD-Opteron-165-...QQcmdZViewItem

This is the guy i got my chip from.


865pe
You run your opty at only 2800 for 24/7 ? I run my at 2900 @ 1.4v and works perfectly. Would need more than 1.4v to hit 3ghz, but i would have to make a vcore mod.

---

Do you know if he´s still selling the same stepping? if so, I´d buy 1 right now.

Only way to find out is to ask the seller, but he'll probably tell you it's random. I think Malkec just got lucky.

Yup, that´s what I thought, I´ll ask the seller anyway. Thanks for reply ;)

^^ That seller never replied to any of my questions regarding his steppings.

Just testing out my first of my two 0608 MPMW's :)

http://img72.imageshack.us/img72/916...efaultv.th.jpg


It failed at 2817 @ stock after 3 hours. This thing is real hot compared to my :cool: CCBBE. I think I need to upgrade my swirftech water kit.

Devious How did you get two of them?

@ Devious: Same question here, and also If you´re planning to get rid of one of those 0608 MPMW's you know where to send PM ;) let me know if you´re planning to sell it.

Devious your temps look above average (ie better than average, not too high)

Quote:

---

Originally Posted by Repoman

Devious your temps look above average (ie better than average, not too high)

---

stock volts on water isn't it?

Today got another 0610 -it looks even better :)

http://img268.imageshack.us/img268/1...131v3hx.th.jpg

Soooo lucky! :)

I got them both off ebay in the last couple of weeks. One of them was on buy it now for a few days and no one touched it, I think the buyer put people off saying it needed 1.42v to get to 2.8, and he showed a picture with it at 55Deg, I gambled on him having poor cooling and I think I was right :)

Managed to get a suicide at 3160mhz :woot:

http://valid.x86-secret.com/show_oc?id=92367

Voltage: 1.475x110% = 1.6225v
MemDiv: 140 = 243mhz 2-2-2-5 1T 3.4v

I agree, these chips need a good cooling , they get very hot .
And yes , I ve seen a couple of them on eBay as well.

And I ve seen them available for , I think , 2-3 hours at Flickerdown
:D :D - and then -"stay tuned " - a very nice shop :D

Quote:

---

Originally Posted by famich

Today got another 0610 -it looks even better :)

http://img268.imageshack.us/img268/1...131v3hx.th.jpg

---

need to run 2 pi's

My CPU seems above average..

http://img278.imageshack.us/img278/3370/38qr.th.jpg

nice clocks in this thread, people are likin the 0610s and 0608s. Weird how we haven't seen anything new for a WHILE, 0608 are like a month old, where's the new stuff! I saw FX60 posted with 0620! I'll bet they keep going with teh bugged memory controllers, which means 3 Ghz for us.

Also if you've got 3 Ghz dual core... put it to use! Run rosetta :D
http://www.xtremesystems.org/forums/...play.php?f=193
Team Xtremesystems needs every helping hand ;)
Also a good burn in tool, i run it 24/7 while burning in processors, won't crash or fail like prime. Also the loaded temps help the paste set.
/shameless promotion

here are the first results from my CCBWE 0609FPAW:

http://img386.imageshack.us/img386/2...145v5cv.th.jpg

Will try to lower volts, heat is killing me.

Question: will this chip run 3Ghz 24/7 under Mach II GT? Is it coldbugged?

i'm also pretty surprised we haven't seen any new steppings since the 0610. we are still seeing 0551's coming out of some shops

i think i got one without a cold bug :D
ccbwe 0602 bpmw
ihs off.
idle at 3.2ghz at -2*c
http://valid.x86-secret.com/show_oc.php?id=92379