Printable View
:DHave any of you guys checked the voltages on this board with a multimeter? According to Windows utilities like CPU-Z, my board overvolts vcore big time. Anyone else have that issue? And if so, what about VTT -- is it overvolted too? Thanks for any input.
Update to the P06 BIOS version.Quote:
Originally Posted by Aivas47a
For the Vcore disable Vdroom compensation.
The Vtt reading in the BIOS with the P06 BIOS is correct ( I mean the reading in the Hardware Monitoring menu ).
[QUOTE=INFRNL;3734416]UT. did you get your settings yet. can you post them for me as I am an idiot and cant get above 179 bclock no matter what I do.
please use this template (not really a template.hoping someone will make one and start a sticky for bios settings). I got it from someone on my thread
There are a LOT of 920's out there that will only get to that bclk or a little higher. I have 5 920's and only one will do 200+ bclk and 1 will do 195 or so and I think that is lucky! It does not matter which mobo you try, high bclk OC's are entirely dependent on the quality of the IMC assuming of course you don't have a mistake in your settings. I just hope the D0 stepping coming out will clock better than the chips available now.
I wouldn't count on it ;)Quote:
Originally Posted by tripgood
Yeh, I wonder why there are no guys with ES praising how wonderful the new stepping is going to be.:(Quote:
Originally Posted by BenchZowner
I get the "No Virtual Drive" mesage as well but it keeps going and boots fine. I use this drive as back-up and storage and am not trying to boot from it. What kind of array are you trying to create with one drive?Quote:
Originally Posted by chawks2
Rookie mistake, was using 32bit drivers on a 64bit OS, DUH! Thanks for your responses B.Quote:
Originally Posted by Bootsy
Sorry INFRNL, I won't be able to post till tomorrow, I work the weekends and they 12 hour shifts, so it doesn't leave me much time to mess with. I am off Tuesday and I will definitely get them for you. I did post some suggestions for you in the other thread.
Thanks very much for the help BZ. :up:Quote:
Originally Posted by BenchZowner
Um... can I ask why? :confused: I'm curious myself and wondering if I should wait to get a D0 stepping 920, or one of the current crop that's out there.Quote:
Originally Posted by BenchZowner
The only benefit from obtaining a D0 revision CPU is going to be the lower temps.Quote:
Originally Posted by rambler358
Anyone having S3 resume issues on P06? The computer actually turns off now on S3 as apposed to staying on in sleep mode in S1, but I still can't get back into Windows after waking up. Screen stays black.
Thanks for the info. It may be worth waiting for then, as lower temps are definately a good thing. :)Quote:
Originally Posted by BenchZowner
I have no problems at all with S3 and P06.Quote:
Originally Posted by BrokeDown
Are you sure your system is totally stable ?
p.s. Here's a video if you think I'm not speaking the truth ;)
http://www.youtube.com/watch?v=BP8r-...e=channel_page
Pretty sure I'm stable. Specs in sig. No OC errors in BIOS either. I'll try going back to stock and see if anything changes.Quote:
Originally Posted by BenchZowner
what is the maximum size supported memory on this board? 12 or 24GB?
thanks
[QUOTE=tripgood;3734777]This is understandable and very possible, but my batch has proven to get very good results. I cant recall the batch off hand (3837B317, I think) I hope I didnt get a dud, I will be pissed. I think its just my lack of experience and could possibly be my supertalent ram. I will replace ea piece 1 @ a time if need be.Quote:
Originally Posted by INFRNL
on a side note. I cant even run the ram settings on auto. I think auto only works for 133-? wont work at 150. I had to manually set timings to 9-9-9-24 just to be safe and get the system to run. Im hoping that different ram might help.
Thanks; I appreciate it UT. I will keep an eye out. Also I saw your recommendations and did not help any.Quote:
Originally Posted by Utnorris
Hopefully later this month I will have enough money to buy a new mobo and cpu to do further testing.
INFRNL, posted them in your thread.
^^^ Thanks again UT; I will play with it tonight.
Also I sent you and BZ a URGENT pm about ram recommendations. need to get ram here by sat withough paying overnight fees. Thinking Dominator or Mushkin 1600 ram, but not sure if its neccessary. other option is new corsair xms3 cl8 or ocz black xmp ram. Thanks
ocz: http://www.newegg.com/Product/Produc...82E16820227388
corsair cl8: http://www.newegg.com/Product/Produc...82E16820145236
Dominator: http://www.newegg.com/Product/Produc...82E16820145224
Mushkin: http://www.mushkin.com/doc/products/...ail.asp?id=730
EDIT: I do notice most people seem to be running the Dominators, and a cpule running the Mushkin...which make me lean towards the doms, but is a little more expensive than Mushkins
Hi peeps :welcome:
Is this the official Bloodrage thread ?? If not please point me to it as i couldnt find it with search :shrug:
Anyways got one of these beautifull boards yeasterday and gotta say i'm in love. I actually gave it a kiss, gotta say did get a strange look from my wife :rolleyes:
Anyways to get to the point i got myself i7 940 and 3x2 GB Dominators 1600MHz with the board.
Now i need some help :yepp:
Yes i'm a total N00B when it comes to i7 and setting it up in BIOS, i know its totally different to normal 775 boards but thats as far as my knowladge goes.
Should i update my boards BIOS to latest one out there, also is there any particular settings i need to keep an eye on just to be able to get it to boot up at normal 940 speed.
If anybody has examples of BIOS settings that would work with my specs i would really appreciate it ;)
We all need to start somewhere, so all your help would be great before i get myself use to this board :up:
Here is the thread for bios settings:
http://www.xtremesystems.org/forums/...d.php?t=221939
And the area for all Foxconn:
http://www.xtremesystems.org/forums/...play.php?f=281
your a star, thank you very much
^^^ also to add that you should update your bios to P06. there is a bios section
[QUOTE=tripgood;3734777]Quote:
Originally Posted by INFRNL
I was just thinking about something. Being that I am rock solid @179; how often is a system solid and you bump up bclock 1 and get nothing. Anything is possible, but from my experience instability is gradual to a point. like it would start to get flaky at a certain point or will run for a bit then crash. I am going from rock solid to lucky if I can boot into windows just by bumping up the bclock by 1.
Seems to me that it would be something else besides the cpu. possibly ram, settings, or mobo.
I could go buy another cpu, but dont want to spend 300 when D0's are around the corner. I can also buy another Bloodrage locally or a competitors board, but not sure I want to do that either, lol. would rather find a deal on a used board or wait for prices to drop a bit more. I am hoping to have some ram this weekend, which will be another step in the process.
Cheers for that :up:Quote:
Originally Posted by INFRNL
Just been reading up on OCing, found this site with little guide - you think its good place to start or are there any other guides i should be looking at
http://www.linustechtips.com/how-to/...clocking-guide