ASUS P5Q3 Deluxe discussion

Printable View

Show 100 post(s) from this thread on one page

09-26-2008, 03:49 PM
Fitseries3

i have had a few sets of HZ's now and only this pair has run this well.
09-26-2008, 03:52 PM
BNDMOD

Quote:

Originally Posted by fitseries3

i have had a few sets of HZ's now and only this pair has run this well.

Ah... so... not all or many pair of HZ can run that speed ? only one of few kits that you have tested?
09-26-2008, 04:12 PM
Fitseries3

i think most pairs do pretty good but not all. im still trying to get something over 2000mhz to work.
09-26-2008, 04:19 PM
BNDMOD

Quote:

Originally Posted by fitseries3

i think most pairs do pretty good but not all. im still trying to get something over 2000mhz to work.

Hahaha Vista can`t boot... winload break with 1900 to 2000 mhz hahaha i need XP....
09-26-2008, 04:22 PM
Fitseries3

you may need more NB for it to work. i put a fan over my NB and use 1.46v- 1.54v depending on the cpu's speed. i know for a fact that i cannot get 5ghz cpu/2000mhz mem to boot into vista and get a screenshot. you may try the 9x multi and see if it works though. good luck.
09-26-2008, 04:30 PM
BNDMOD

Quote:

Originally Posted by fitseries3

you may need more NB for it to work. i put a fan over my NB and use 1.46v- 1.54v depending on the cpu's speed. i know for a fact that i cannot get 5ghz cpu/2000mhz mem to boot into vista and get a screenshot. you may try the 9x multi and see if it works though. good luck.

I set 500x8 (4000Mhz) and ddr3-2000 9-7-8-21 and 9-9-9-24 with 2.04 vdimm

I use 1.4 for nbv

I have 3x120mm shooting directly to the mother... and corsair air flow over ram... :)

I`ll try to use more vnb
09-29-2008, 08:14 AM
BNDMOD

Ok.. let me show this..

RAM MaxFREQ. 2000 Mhz (450 x 9)

http://img223.imageshack.us/img223/5...000cl91pq6.jpg

http://valid.x86-secret.com/show_oc.php?id=424625

http://img241.imageshack.us/img241/7...hot1is1.th.jpg

Only quick test for now.
09-29-2008, 08:16 AM
Fitseries3

nice!

i still cant get much over 2000 though.
09-29-2008, 08:18 AM
BNDMOD

Quote:

Originally Posted by fitseries3

nice!

i still cant get much over 2000 though.

Hahaha but you reach 2000 mhz stable.. and i don`t... for now :P i hope...
09-29-2008, 01:20 PM
xTKxhom3r

hi i just got a p5q3 and i wanted to know which is a good ram to buy? on my p5q dlx iv been using gskill and its worked pretty good so far...

i want to buy 4gb and 1333 speed seems to be the sweetspot in price...
09-29-2008, 01:22 PM
Lukee

I was using Kingston HyperX. Pure garbage with this board.

A few people here had very good results with Gskill, so I bought the Gskill 2 X 2GB HZ 7-7-7-18 1.9V kit and it runs smooth.

On my E8600 machine, memory is running at 1680 at it's factory settings.
09-29-2008, 01:34 PM
xTKxhom3r

Quote:

Originally Posted by Lukee

I was using Kingston HyperX. Pure garbage with this board.

A few people here had very good results with Gskill, so I bought the Gskill 2 X 2GB HZ 7-7-7-18 1.9V kit and it runs smooth.

On my E8600 machine, memory is running at 1680 at it's factory settings.

thanks for the reply bro

do you have a link to it? and was it 1333 from factory or 1600?
09-30-2008, 03:45 AM
racergr

Hello guys :p

I tried the mobo with my Q6600 and my phase the previous Friday.

WOW!! I love the FSB! 529FSB with my Q6600, while my P5E64WS Evolution stopped at 507FSB :mad:

http://i302.photobucket.com/albums/n...e/cpu-3174.jpg

I used CPU-Z 1.45 (:mad::mad::mad:), so I can't validate my results.

http://i302.photobucket.com/albums/n...e/cpu-4675.jpg

Max MHZ. My Q6600 has more MHZ, but I had problems with my PSU (CM 400W :rolleyes:)

And here is a completely untweaked SPI

http://i302.photobucket.com/albums/n...eluxe/feaf.jpg

The mobo didn't work well with my 1600 ADATA, but it worked very fine with one stick Corsair Dominator 1800C7D (the other is dead :rolleyes:). 1010MHz 7-6-6-15 ~2.2V. I can't find the screenshot at the moment, when I find it I'll post it :cool:
09-30-2008, 05:07 AM
Lukee

Quote:

Originally Posted by xTKxhom3r

thanks for the reply bro

do you have a link to it? and was it 1333 from factory or 1600?

Here you go.

http://www.newegg.com/Product/Produc...82E16820231167

It's listed at 1600 MHz

They also have the 2 GB kits if you only want 2 x 1 GB.

If price is a consideration and you want the 1333 MHz memory, I don't see why it should be much different. I would get the HZ one though.
10-01-2008, 12:46 AM
xTKxhom3r

Quote:

Originally Posted by Lukee

Here you go.

http://www.newegg.com/Product/Produc...82E16820231167

It's listed at 1600 MHz

They also have the 2 GB kits if you only want 2 x 1 GB.

If price is a consideration and you want the 1333 MHz memory, I don't see why it should be much different. I would get the HZ one though.

thanks for the reply bro but thats to expensive for me...i think im just going to go with the 1333 versions...
10-01-2008, 05:05 AM
Lukee

Quote:

Originally Posted by xTKxhom3r

thanks for the reply bro but thats to expensive for me...i think im just going to go with the 1333 versions...

Cool. They should work fine for you.
10-06-2008, 05:07 AM
Lukee

Question about 500+ FSB.

Let's say that I want to try 520 FSB and 8 x multiplier, would I have to increase the NB or FSB voltage?
10-07-2008, 02:37 AM
masterchan777

Bios 1406

Hi Guys , Bios version 1406 will be out very soon , ASUS is updating its support pages , HOWEVER if you don't want to wait until this is done ;), you can download it from ASUS server

http://dlsvr04.asus.com/pub/ASUS/mb/...ELUXE-1406.zip

Things went more stable for me with it and I think it is going to be a final release not a BETA , cheers ...
10-07-2008, 09:49 AM
Sav

thank you :up:
10-07-2008, 02:25 PM
Crazy Inside

Hi guys

Look what I can with my memorys... No tweaks

http://img509.imageshack.us/img509/8889/1000me2.jpg

Regards
10-07-2008, 08:23 PM
BNDMOD

How good is the 1406? i`m planing to load it tomorrow :) and try to test it with stock fan :s
10-08-2008, 02:30 PM
janjan

Quote:

Originally Posted by Crazy Inside

Hi guys

Look what I can with my memorys... No tweaks

http://img509.imageshack.us/img509/8889/1000me2.jpg

Regards

can u post your everest results please ?
10-11-2008, 11:30 AM
Lukee

Has anyone been able to go past 540 FSB on air or water?

I have been able run 540 x 8.5 ~ 4.61 GHz , but I can't push my FSB any further. I even lowered the multiplier to 6 x and kept my memory at around 1600 MHz, and nothing.

If you have gone past that FSB, what settings did you use?

Thanks.
10-11-2008, 11:34 AM
Fitseries3

ive gotten to 580. it wasnt hard but anything over that is a PITA. i got 620 to post somehow but not much else.

my board seems to have different settings depending on what day of the month it is. i may sound crazy but a lot of ppl i have talked to feel the same way. its just an odd board.
10-13-2008, 02:43 AM
Tatty_One

Quote:

Originally Posted by fitseries3

ive gotten to 580. it wasnt hard but anything over that is a PITA. i got 620 to post somehow but not much else.

my board seems to have different settings depending on what day of the month it is. i may sound crazy but a lot of ppl i have talked to feel the same way. its just an odd board.

I agree totally, an example is, I set the system up for benching the quad at 4.4gig, Orthos it for 5 hours....no problems, do several very nice 2006 runs....no problems, save the profile, then a week later load the profile for some more benching......overclock failed! :shakes: Everything is in the memory, I have the HZ's and I can run really tight upto 1600mhz (6-6-6-16) but always have stability issues at 7-7-7-18 (or 20) beyond 1600mhz unless I really loosten, for some reason my board does not like the 7 timings :confused:

Show 100 post(s) from this thread on one page