Water Cooled Case Gallery

Printable View

Show 100 post(s) from this thread on one page

03-08-2007, 09:48 AM
Ic3man

Nice blocks, dunno If I would run them all of one pump though looks to be a hell of alot of restriction there.
03-08-2007, 09:54 AM
Pete

I does look cool without any hose clamps..just hop they don;t move!
03-08-2007, 10:00 AM
Timmay

loop is set up wrong IMO, but hey, looks nice!
03-08-2007, 10:19 AM
Sparky

Quote:

Originally Posted by Timmay

loop is set up wrong IMO, but hey, looks nice!

Why, loop order doesn't matter.
03-08-2007, 10:35 AM
Pete

I would always goes CPU 1st but how do you make that look nice in a sling loop....he's really though about it and pulled off nicely
03-08-2007, 10:37 AM
lowfat

Quote:

Originally Posted by SparkyJJO

Why, loop order doesn't matter.

exactly. Shorter tubing will help more, and i think he did a good job at keeping the tubing as short as possible.
03-08-2007, 10:51 AM
krueml_

Quote:

Originally Posted by lowfat

exactly. Shorter tubing will help more, and i think he did a good job at keeping the tubing as short as possible.

I think so, too. But I'm not satisfied with the long tubing from mosfets to pump inlet.. :(

IanY .. no problem .. :) It's UV WaterDye: http://www.aquatuning.de/product_inf...ye-29-5ml.html
03-08-2007, 11:17 AM
IanY

Krueml,

I guess the Alphacool water tank is not removable for filling. So you have to be careful when topping up the reservoir, correct?

You use 7/16" ID 5/8" OD Tygon R-3603 right? That doesn't look like 1/2" ID 3/4" OD Tygon to me.

Wasserzusatz UV Dye !! :)
03-08-2007, 11:37 AM
Foxy_PT

Those Ek blocks are Sweet :slobber:

That alphacool top seems very nice. How about the performance? Better than a mcp655?
03-08-2007, 12:28 PM
N H O

just refilled the loop not too long ago

http://i16.photobucket.com/albums/b2...rkstation4.jpg
http://i16.photobucket.com/albums/b2...ics/Tower2.jpg
http://i16.photobucket.com/albums/b2...gleNoFlash.jpg
http://i16.photobucket.com/albums/b2...AngleFlash.jpg
http://i16.photobucket.com/albums/b2...lesNoFlash.jpg
http://i16.photobucket.com/albums/b2...ablesFlash.jpg
http://i16.photobucket.com/albums/b2...Pics/Tower.jpg
03-08-2007, 02:20 PM
krueml_

Quote:

Originally Posted by IanY

Krueml,

I guess the Alphacool water tank is not removable for filling. So you have to be careful when topping up the reservoir, correct?

You use 7/16" ID 5/8" OD Tygon R-3603 right? That doesn't look like 1/2" ID 3/4" OD Tygon to me.

I'm using a short hose with a funnel for filling, no problems.. and yes, it's 7/16"ID 5/8"OD..
But I have really problems to get the air out of the system - as you can see in the 3th picture - the reservoir is too small, the Laing has too much power and the rig is simply too less restrective. Alphacool will send me a swam for the reservoir and I hope that the storm will be over then..
03-08-2007, 02:41 PM
Pete

Sorry i'm lost to what the issues is where?
03-08-2007, 02:44 PM
Timmay

Quote:

Originally Posted by SparkyJJO

Why, loop order doesn't matter.

It does if you want the last deg in temp off your CPU etc, Tubing doesn't have much effect on resistance, its all the tiny little restrictive SB/NB blocks I would be worried about.
03-08-2007, 02:49 PM
thunderstruck!

Quote:

Originally Posted by Timmay

It does if you want the last deg in temp off your CPU etc, Tubing doesn't have much effect on resistance, its all the tiny little restrictive SB/NB blocks I would be worried about.

No, it goes from pump -> rad -> gpu -> cpu.

Also, loop order really doesn't make a difference. The important thing it to use the least amount of tubing and make the least bends.
03-08-2007, 02:50 PM
coolmiester

Quote:

Originally Posted by krueml_

I'm using a short hose with a funnel for filling, no problems.. and yes, it's 7/16"ID 5/8"OD..
But I have really problems to get the air out of the system - as you can see in the 3th picture - the reservoir is too small, the Laing has too much power and the rig is simply too less restrective. Alphacool will send me a swam for the reservoir and I hope that the storm will be over then..

I found that krueml_ using an 18watt DDC in my HTPC which was making all sorts of gurgling noises from the res no matter how full i filled it and couldn't get the last bubbles out so had to resort to a bit of foam.

I used the filter foam from an Eheim 1250 pump which fits perfectly into the Alphacool Plexi res top and worked an absolute treat - it hasn't so much slowed the flow down but stopped the turbulence in the res altogether so you can literally fill it completely to the top even with the pump running

http://www.coolercases.co.uk/images/htpc/zal_23.jpg

http://www.coolercases.co.uk/images/htpc/zal_24.jpg

http://www.coolercases.co.uk/images/htpc/zal_25.jpg

Then fill the Res cap with whatever liquid your using and stick it in the freezer for 20minutes or so until it freezes - make sure you have the res filled up right to the brim then screw the cap back on with the frozen liquid inside - frozen liquid melts and it gets rid of the air that normally gets trapped in the lid...........genius :)

http://www.coolercases.co.uk/images/htpc/frozen_cap.jpg
03-08-2007, 03:08 PM
Timmay

Quote:

Originally Posted by thunderstruck!

No, it goes from pump -> rad -> gpu -> cpu.

Well I be damned, I thought it went the other way.
03-08-2007, 03:21 PM
Pete

Paul that really is genius sir! I like that a lot. A very simple trick and mod and use of pyhsics. Im rather impressed
03-08-2007, 08:18 PM
sreedx2

Here is my new build :woot:

Just mind the messed up rheobus mod :)

http://www.reed.infosathse.com/sreed/comp1.JPG.com/sreed/comp1.JPG[/URL]

http://www.reed.infosathse.com/sreed/comp2.JPG

http://www.reed.infosathse.com/sreed/comp5.JPG

http://www.reed.infosathse.com/sreed/comp4.JPG

http://www.reed.infosathse.com/sreed/comp6.JPG

http://www.reed.infosathse.com/sreed/comp7.JPG

http://www.reed.infosathse.com/sreed/comp9.jpg
03-08-2007, 08:30 PM
Polizei

Very nice. What UV dye are you using? I want a color similar to that, maybe a little brighter.
03-08-2007, 08:42 PM
sreedx2

That is UV blue fluid xp, I also have some Pentosin G11 which I am going to try after this

ah ic you also have a crappy 6600 I am at 3.6ghz running 1.5875 Vcore
03-08-2007, 08:57 PM
safan80

Quote:

Originally Posted by Thomas FJ

How will you prime the system?
No there is no reservoir or T-line as far as I can see :)
/Thomas

he uses the bleed screw on his pa120.3
03-08-2007, 09:04 PM
Polizei

I have pushed it to 3.55GHz @ 1.625v... I couldnt get much higher otherwise Orthos failed almost immediately. This computer is the first one Ive ever built, so a like, 45% overclock is not too shabby for me. I could probably hit 3.6 with like, 1.65v, but I dont know...

I want that 50% overclock sometime... maybe when I get water this summer.

I was in a 16C room and with my SI-120 with some POS Thermaltake fan I was hitting 49C load.
03-08-2007, 09:07 PM
sreedx2

Yeah that is still good, I am also happy with my OC but I would like more .. or lower temps some C2D`s can reach go much higher with a lot lower Vcore :slobber:
03-09-2007, 06:24 AM
IanY

SreedX2,

Just an observation. I would fill the drain port completely with fluid. Leaving an unfilled section that is subject to condensation (and other forms of growth) is not the smartest idea.
03-09-2007, 08:03 AM
sreedx2

IanY ... I was wondering about that, thanks for the tip I will get that filled up :)
03-09-2007, 11:51 AM
Polizei

I have seen a lot of people getting to 3.6GHz with less than 1.5v... they have different motherboards than I do. The Infinity 975X/G that I have was one of 5 or 6 that were avaliable when the Core2's were released in August, so I grabbed it knowing DFI could get me high clocks. I am very pleased with my first (and not my last) DFI board.
03-10-2007, 02:06 PM
ogOOr

I've just finish my project (Zimne ogOOrki) :D Here are some photos: http://img413.imageshack.us/img413/9...0118qp8.th.jpg
http://img299.imageshack.us/img299/1...0121ur0.th.jpg
http://img259.imageshack.us/img259/9...0124yb8.th.jpg
http://img259.imageshack.us/img259/5...0125jy7.th.jpg
http://img102.imageshack.us/img102/7...0126ys1.th.jpg
http://img293.imageshack.us/img293/8...0130rv6.th.jpg
http://img440.imageshack.us/img440/8...0129bc2.th.jpg
http://img111.imageshack.us/img111/6...0153ly8.th.jpg
Now I have to find some box for hdd. I think scythe quite drive will be good.
03-10-2007, 02:50 PM
Spawne32

Quote:

Originally Posted by sreedx2

That is UV blue fluid xp, I also have some Pentosin G11 which I am going to try after this

ah ic you also have a crappy 6600 I am at 3.6ghz running 1.5875 Vcore

I dont understand, your calling a E6600 crappy? Yet your using fluid xp?:confused:
03-10-2007, 03:13 PM
coolmiester

Coolermaster Wave Master - Blue
Tyan K8WE (S2895) Dual Opteron DDR400 SLI
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512MB OCZ DDR PC-3200 ECC Registered / Dual Channel
2x Sli Gainward 6800 Ultra Golden Samples
Enermax EG851-AX-VH 660W ATX2.0 SLi Compliant
Western Digital Raptor 36.7GB 10,000RPM SATA 8MB Cache
Pioneer DVR-109XLS 16 x 16 DVD±RW Dual Layer ReWriter

2x Danger Den TDX A64 Blocks
2x Danger Den NV-68 Blocks
Black Ice Extreme II
2x NoiseBlocker Fans on Nexus Controller
Danger Den Bay-Res
Modded Laing DDC Pump
Danger Den Hose

http://www.coolercases.co.uk/images/dualmaster/24.jpg

http://www.coolercases.co.uk/images/dualmaster/25.jpg

http://www.coolercases.co.uk/images/dualmaster/66.jpg

http://www.coolercases.co.uk/images/dualmaster/77.jpg

http://www.coolercases.co.uk/images/dualmaster/37.jpg
03-10-2007, 03:23 PM
sreedx2

Quote:

Originally Posted by Spawne32

I dont understand, your calling a E6600 crappy? Yet your using fluid xp?:confused:

that is twice now everyone is taking me saying it is crappy the wrong way

what I mean is I just wish I could get more out of it without having such a high Vcore :(

I am new to water cooling, take it easy on me I did not realize fluid xp was so :banana::banana::banana::banana:ty I do have some petosin G11 which I am going to make a mix of :D that should take my temps down a little :slobber:

Quote:

Originally Posted by coolmiester

Coolermaster Wave Master - Blue
Tyan K8WE (S2895) Dual Opteron DDR400 SLI
2x AMD Opteron 265 dual core SKT 940 Retail (1.8Ghz-0.9nm-2Mb)
4x 512MB OCZ DDR PC-3200 ECC Registered / Dual Channel
2x Sli Gainward 6800 Ultra Golden Samples
Enermax EG851-AX-VH 660W ATX2.0 SLi Compliant
Western Digital Raptor 36.7GB 10,000RPM SATA 8MB Cache
Pioneer DVR-109XLS 16 x 16 DVD±RW Dual Layer ReWriter

2x Danger Den TDX A64 Blocks
2x Danger Den NV-68 Blocks
Black Ice Extreme II
2x NoiseBlocker Fans on Nexus Controller
Danger Den Bay-Res
Modded Laing DDC Pump
Danger Den Hose

Nice :slobber: I like your case :D
03-10-2007, 07:37 PM
Patriote

Indeed! Great job on the Rig coolmiester!
03-10-2007, 10:36 PM
Spawne32

Quote:

Originally Posted by sreedx2

that is twice now everyone is taking me saying it is crappy the wrong way

what I mean is I just wish I could get more out of it without having such a high Vcore :(

I am new to water cooling, take it easy on me I did not realize fluid xp was so :banana::banana::banana::banana:ty I do have some petosin G11 which I am going to make a mix of :D that should take my temps down a little :slobber:

Nice :slobber: I like your case :D

ok lol you are forgiven for using fluid xp :lol:
03-10-2007, 11:12 PM
sreedx2

I actually just mixed up some pentosin , I am going to get some of the pentosin with the UV die, should I be concerned about the UV die cloging or anything ? :)
03-11-2007, 12:45 AM
punisher69

http://i168.photobucket.com/albums/u...9/IMG_0036.jpg
http://i168.photobucket.com/albums/u...9/IMG_0037.jpg
http://i168.photobucket.com/albums/u...9/IMG_0038.jpg
http://i168.photobucket.com/albums/u...9/IMG_0039.jpg
http://i168.photobucket.com/albums/u...9/IMG_0042.jpg
http://i168.photobucket.com/albums/u...9/IMG_0044.jpg
http://i168.photobucket.com/albums/u...9/IMG_0045.jpg
http://i168.photobucket.com/albums/u...9/IMG_0046.jpg
http://i168.photobucket.com/albums/u...9/IMG_0074.jpg
http://i168.photobucket.com/albums/u...9/IMG_0064.jpg

Any Suggestion's?

Thanks
03-11-2007, 12:56 AM
ANP !!!

Nice looking Setup u got there Punisher :D
03-11-2007, 01:29 AM
quiet

Nothing special... my first attempt. P180 is not radiator friendly but it came out nice :)

http://www.magnatique.com/devsh0p/wc/01.jpg
http://www.magnatique.com/devsh0p/wc/02.jpg
http://www.magnatique.com/devsh0p/wc/03.jpg

I don't use the cathodes since there is no case window, they are just for the pics

http://www.magnatique.com/devsh0p/wc/04.jpg
http://www.magnatique.com/devsh0p/wc/05.jpg
03-11-2007, 09:35 AM
lowfat

coolmiester, that is truely just sick. :)
03-11-2007, 10:57 AM
coolmiester

Quote:

Originally Posted by mcoffey

Paul/coolmiester,

I'm starting to wonder if you sold your soul to the Devil to be able to crank out all the incredible builds you do.:D I had a friend up yesterday showing her my new rig, and went thru your posts showing her your great work as an example of premium builds. Each one just blows me away more than the other, and I can't wait to see your next.

andyc

WOW strong praise indeed.

I just try to go for the minimalist look keeping everything clean and simple.

Cheers andyc and everyone for the positive feedback:)
03-11-2007, 05:10 PM
thunderstruck!

3 Attachment(s)

Here's mine. Not as sick as coolmeister's. Next step is sleeving, routing & hiding all those wires & soundproofing (it's near silent now), but I might not get to that until may. :p: Finally got metal barbs on the MCW-60 and a PA120.3. Btw, the fuzion completely rocks.

Attachment 56574

Attachment 56575

Attachment 56576
03-11-2007, 05:28 PM
[cTx] Nooc

nice parts there thunderstruck :toast:
03-12-2007, 08:16 AM
dnb#

2 Attachment(s)

redid my loop cause i've got a new pump (DD MAG II LE) just 2 pics let me hear your comments :)
Attachment 56586
Attachment 56587
03-12-2007, 08:19 AM
Pete

Thats the sex, how ever keep your eye on the pump they die randomly, rapiedly, repatedly,
03-12-2007, 08:27 AM
dnb#

does that pump die quickly? hope not, cause it's a great pump and the most silent I know....The pump is added to a fancontroller and running on the lowest stand :D
03-12-2007, 08:44 AM
Pete

Yeah, the box it comes in makes for a good coffin for it!

Maric in the UK has boxs of dead ones is what he said.
03-12-2007, 08:56 AM
dnb#

hhmm strange, but I'm not running it @ 12v but just a few V's i think 1/8 of his power cause the pump runs too fast for me when @ full....
I don't believe the pressure/flow stories for better temps...I just want a silent pc
and I don't think the pump dies quickly with power @ 1/8...
03-12-2007, 09:02 AM
Pete

Ask the man himself but i've read countless issues all at stock...just keep eyes on it
03-12-2007, 09:04 AM
dnb#

ok, I shall keep my eyes on, thanks for the info :)
03-12-2007, 09:09 AM
ramenchef

Nice setup. What dye did you use to get such a nice green?
03-12-2007, 01:52 PM
Baron

Quote:

Originally Posted by ramenchef

Nice setup. What dye did you use to get such a nice green?

Same question here.

Really nice setup, and the green colour is sweet.
03-13-2007, 04:05 AM
dnb#

It's glowmotion from aquacomputer, the colour is really nice....
The only thing is (I don't think you can see it on the pics) my tygon tubing is all copper/red/brown colored :S I have these hoses for about a year now, and used all different kinds of dyes... I think it's from the radiator...

somebody knows this problem?
03-13-2007, 04:12 AM
dnb#

1 Attachment(s)

this is the uv dye I used:

Attachment 56601
03-13-2007, 12:22 PM
Ic3man

**Update**

Had a play with the green dye and UV positioning today - heres how it stands atm :

Green = nvidia - Blue = intel :P

http://img.photobucket.com/albums/v6...%20UFO/008.jpg

EK res stands out a bit better now.

http://img.photobucket.com/albums/v6...%20UFO/004.jpg

Makes my desk look small now:o

http://img.photobucket.com/albums/v6...%20UFO/019.jpg
03-13-2007, 12:43 PM
Garu

Iceman, that is one sexy looking thing.
03-13-2007, 12:45 PM
Ic3man

hehe, thanks:D
03-13-2007, 12:57 PM
[cTx] Nooc

that first pic is just yum ic3man :D
03-13-2007, 01:01 PM
Ic3man

Gotta love Eddy - makes some quality gear tbh.
03-14-2007, 12:48 AM
dnb#

ic3man your computer makes me a little bit horny :D especially the case
03-14-2007, 06:35 AM
Concept 5000-FX

I'm horny too :slobber:
You got two water systems ?
I ask becuse i see just the GPU tubing in UV effect...
03-14-2007, 08:09 AM
Ic3man

Yup - one blue (CPU & Chipset) and one green (GPU).:)
03-14-2007, 02:32 PM
JoeBar

Very nice setup Ic3man! :up:
03-14-2007, 02:55 PM
Ic3man

Cheers Joe:) mountain modders gotta stick together :D
03-15-2007, 04:13 AM
Patriote

Me liking a lot Ic3man! Good job!
03-15-2007, 04:16 AM
Concept 5000-FX

Quote:

Originally Posted by Ic3man

Yup - one blue (CPU & Chipset) and one green (GPU).:)

Very Nice !!!
You can tell me what part you use for those systems ?
what is the temps ?

;)
03-15-2007, 04:32 AM
Greg_1

As Austin Powers would say, "Groovy Baby!" ;)
03-15-2007, 05:03 AM
dnb#

Quote:

Originally Posted by Greg_1

As Austin Powers would say, "Groovy Baby!" ;)

xD right
03-15-2007, 06:18 AM
Ic3man

Quote:

Originally Posted by Concept 5000-FX

Very Nice !!!
You can tell me what part you use for those systems ?
what is the temps ?

;)

Hardware

Mountain Mods U2-UFO Powder black - solid top
Conroe E6600 @ 4ghz
Corsair xms26400c4 v1.2
xfx 8800GTX
XFI xtreme music
ECS PN2-SLI2+ 680i
Asus DVDRW 16x
Liteon DVDRW 18x
Akasa superflower Fan controller
Silverstone zeus 750w

Lighting

4x12" UV cathodes
2x4" UV cathodes

Cooling

CPU Loop

18w Laing DDC Ultra pump
Thermochill PA 120.3
Thermochill 120.3 shroud
D-Tek Fusion CPU block
Danger Den 680i Chipset block
Danger Den Dual bay acrylic reservoir
8ft Danger Den Clearflex 60
8 x Danger Den High-flow barbs - 2x 3/8-1/2 barbs.
2 litres distilled
Pentosin G11 Coolant
PT-Nuke
Invisible UV-Blue dye
3 x Yate loon 120mm clear case fans (blue leds) - D12SL-12 controlled by :
Akasa Super flower fan controller.

GPU Loop

10w Laing DDC Pro (Blue impellor - moddable) pump.
HWlabs Black Ice GT Stealth 120.2
EK 8800GTX acrylic top
EK 150 multioption reservoir
6ft Danger Den Clearflex 60
8 x EK high flow barbs
1.5 litres distilled
Zerex super coolant
UV purple feser UV dye
2 x Yateloo 120mm clear case fans (blue leds) - D12SL-12
03-15-2007, 06:21 AM
Ic3man

Temps -

Conroe @ 4ghz with 1.6v = 38c idle 54 load (12hrs orthos stable)

8800GTX 39c idle - load ??? All at stock atm as playing with vista.
03-15-2007, 08:10 AM
RockfordFosgate

Update:New watercooling parts :)

Swiftech Apogee GT Ex.:slobber:
Swiftech MCW30 SLİ
Dangerden Maze4
Aqua 360mm Airplex Pro Radiator
Eheim 1000l
3/8 TT TUbe
3x120mm Enermax fan
Aqua GlowMotion Uv Liquid

http://img401.imageshack.us/img401/3...2007558yy3.jpg

http://img248.imageshack.us/img248/4...2007565nw9.jpg

http://img401.imageshack.us/img401/6...2007566rx0.jpg

http://img248.imageshack.us/img248/3...2007570ln1.jpg

http://img338.imageshack.us/img338/6...2007575tc2.jpg

http://img338.imageshack.us/img338/9...2007576ky0.jpg

:toast:
03-15-2007, 02:12 PM
marauder16

Iceman, I bow to your 4GHz stable result only on watercooling, I would just like to know your secret, maybe it's that the chipset is water cooled, don't know, but 4GHz 24/7 on only 1.6V, that sounds so impossible to me, I checked out your result at 4GHz club and I can't be more impressed, just bravo! :toast:
03-16-2007, 02:37 AM
Ic3man

No secrets really - just what I learned on here and other places. Having a good cpu in the first place obviously helps too - so you gotta be lucky. I aint a pro clocker, far from it - I just rely on my luck to get me most of the way:D I've also got a 27b that I'm playing with atm that is also up to 4ghz but no where near stable as yet. It runs cooler than the 32b but dosn't scale with vcore aswell.
03-16-2007, 06:50 AM
cyberspyder

I'm urging you to put some clamps on the tubing, especially on this one. It looks ready to slip off the barb.:stick:

http://img214.imageshack.us/img214/2...7565nw9mc3.jpg

Brendan
03-16-2007, 07:04 AM
RockfordFosgate

Thanks but I changed :)

http://img294.imageshack.us/img294/9...2007563sm6.jpg
03-16-2007, 09:24 PM
smopoim86

Well, i finally think i'm finished with it(other than getting a quad and a fuzion)

http://img485.imageshack.us/img485/4994/PICT4350.jpg
Inside
http://img485.imageshack.us/img485/5417/PICT4352.jpg
http://img485.imageshack.us/img485/8653/PICT4354.jpg
dual color leds FTW
http://img485.imageshack.us/img485/1/PICT4333.jpg
http://img485.imageshack.us/img485/5430/PICT4335.jpg
http://img485.imageshack.us/img485/5452/PICT4334.jpg

http://img485.imageshack.us/img485/8048/PICT4341.jpg

More @ http://picasaweb.google.com/smopuim86/V2100Updated
and http://picasaweb.google.com/smopuim8...AndWatercooled
03-17-2007, 02:48 AM
marauder16

Quote:

Originally Posted by Ic3man

No secrets really - just what I learned on here and other places. Having a good cpu in the first place obviously helps too - so you gotta be lucky. I aint a pro clocker, far from it - I just rely on my luck to get me most of the way:D I've also got a 27b that I'm playing with atm that is also up to 4ghz but no where near stable as yet. It runs cooler than the 32b but dosn't scale with vcore aswell.

yeah, I was lucky until 3.5Ghz (1.4V on CPU set in BIOS, everything else in stock, 24hrs orthos stable) but after that anything over 3.6GHz needs crazy voltages, but who knows, I'm getting myself a HR-05 maybe it'll do the trick.
cheers ;)
03-17-2007, 05:39 AM
Concept 5000-FX

Quote:

Originally Posted by Ic3man

Temps -

Conroe @ 4ghz with 1.6v = 38c idle 54 load (12hrs orthos stable)

8800GTX 39c idle - load ??? All at stock atm as playing with vista.

Very nice TEMP'S :slobber: and on 4GHz :slobber:
You have a perfectly rig, Hardware and Cooling ! :banana:

Sorry about my english guy's...
03-17-2007, 02:45 PM
elk

Quote:

Originally Posted by quiet

Nothing special... my first attempt. P180 is not radiator friendly but it came out nice :)

http://www.magnatique.com/devsh0p/wc/01.jpg
http://www.magnatique.com/devsh0p/wc/02.jpg
http://www.magnatique.com/devsh0p/wc/03.jpg

I don't use the cathodes since there is no case window, they are just for the pics

http://www.magnatique.com/devsh0p/wc/04.jpg
http://www.magnatique.com/devsh0p/wc/05.jpg

Your temperature ??????????
03-17-2007, 06:44 PM
NickS

Man every time I see that p180 build, I want it more :p:
03-19-2007, 10:57 PM
Grinch

[QUOTE=smopoim86;2074049]Well, i finally think i'm finished with it(other than getting a quad and a fuzion)

http://img485.imageshack.us/img485/8653/PICT4354.jpg

that has got to be a PITA to fill that t-line..
03-19-2007, 11:01 PM
Polizei

I think that T-line runs to a res... shouldnt be that bad if he fills the res and runs the pump for a couple seconds, fill the res again...

EDIT: Just saw the T-line in the bottom... I think its in the bottom so its easy for him to drain out the loop. Look at the top of the case in the front, there is a fillport running to the res.
03-20-2007, 12:59 AM
mat8861

Here is mine mid tower, I did like the one from Martinii (page 113) so it's very similar.

http://img152.imageshack.us/img152/8...rontsn7.th.jpg

http://img133.imageshack.us/img133/6...ted1ef4.th.jpg

http://img405.imageshack.us/img405/2...ntedvg7.th.jpg

I do have a problem with my OCZ, I thought that connecting them will reduce the liquid flow. Shall I put another pump-reservoir and add the graphic card or just connect also the memory?? The space is very limited.....
03-20-2007, 08:08 AM
NysoO

Quote:

Originally Posted by mat8861

Here is mine mid tower, I did like the one from Martinii (page 113) so it's very similar.

http://img152.imageshack.us/img152/8...rontsn7.th.jpg

http://img133.imageshack.us/img133/6...ted1ef4.th.jpg

http://img405.imageshack.us/img405/2...ntedvg7.th.jpg

I do have a problem with my OCZ, I thought that connecting them will reduce the liquid flow. Shall I put another pump-reservoir and add the graphic card or just connect also the memory?? The space is very limited.....

Just connect them, wanna see the babies in actiån!
03-20-2007, 02:51 PM
Concept 5000-FX

Quote:

Originally Posted by mat8861

Here is mine mid tower, I did like the one from Martinii (page 113) so it's very similar.

http://img152.imageshack.us/img152/8...rontsn7.th.jpg

http://img133.imageshack.us/img133/6...ted1ef4.th.jpg

http://img405.imageshack.us/img405/2...ntedvg7.th.jpg

I do have a problem with my OCZ, I thought that connecting them will reduce the liquid flow. Shall I put another pump-reservoir and add the graphic card or just connect also the memory?? The space is very limited.....

I love it.
Where you buy the mofset block ?
03-20-2007, 03:35 PM
italian soldier

Hi all, this is my PC.

Hardware:
Asus A8N32 SLI Deluxe
E-VGA 7800GT + XFX 7800GT
AMD 64 3500+ Clawhammer :(
2x512 Corsair value
Creative Audigy 2 Platinum
Maxtor SATA 120GB + 160GB + 320GB
Tagan 480-U01
TT Armor

H2O cooling:

Pompa MCP655
WB Lunasio Air X-Force R1
Bobble X-Trap-6515/Pro

Global view:

http://www.atris.it/Forum/photoplog/...1_DSCF6631.JPG

In view:

http://www.atris.it/Forum/photoplog/...1_DSCF6636.JPG

http://www.atris.it/Forum/photoplog/...1_DSCF6683.JPG

http://www.atris.it/Forum/photoplog/...1_DSCF6617.JPG

Position of Bobble:

http://www.atris.it/Forum/photoplog/...1_DSCF6610.JPG

Lunasio Air X-Force R1

http://www.atris.it/Forum/photoplog/...1_DSCF6637.JPG

http://www.atris.it/Forum/photoplog/...1_DSCF6634.JPG

Fix the radiator

http://www.atris.it/Forum/photoplog/...1_CIMG1239.JPG

Little test:

http://www.atris.it/Forum/photoplog/...ature_32MB.JPG
03-20-2007, 03:52 PM
ranker

Quote:

Originally Posted by Ic3man

Temps -

Conroe @ 4ghz with 1.6v = 38c idle 54 load (12hrs orthos stable)

8800GTX 39c idle - load ??? All at stock atm as playing with vista.

What chip and which batch #?
03-20-2007, 04:03 PM
CarlD

Quote:

Originally Posted by ranker

What chip and which batch #?

E6600 - L632A663

^ i have his chip infront of me now ;)
03-20-2007, 05:40 PM
CarlD

no its HIS chip.. he sent it me :P
03-20-2007, 08:14 PM
ocnewbee

Here is my loop, all my components are in my sig. The pics with blue liquid was the PC ICE uv blue. Not that uv reactive. The pics with the red liquid is the new fluid XP+ EXT blood red. Cools much better then the PC ICE.

http://img.photobucket.com/albums/v7...e/DSC01225.jpg
http://img.photobucket.com/albums/v7...e/DSC01231.jpg
http://img.photobucket.com/albums/v7...e/DSC01229.jpg
http://img.photobucket.com/albums/v7...e/DSC01232.jpg
http://img.photobucket.com/albums/v7...e/DSC01266.jpg
http://img.photobucket.com/albums/v7...e/DSC01317.jpg
http://img.photobucket.com/albums/v7...e/DSC01318.jpg
http://img.photobucket.com/albums/v7...e/DSC01322.jpg
03-21-2007, 06:06 AM
mat8861

Quote:

Originally Posted by Concept 5000-FX

I love it.
Where you buy the mofset block ?

www.aquatuning.de the mips were not in stock so had to wait couple of weeks, but it worth it to wait.
The mosfet block are made by LUNASIO http://www.lunasio-cooling.com/catal...86e83fef6b694e glued with thermal bi-component mixed with thermal paste artic silver.

So do you think reducing from 8mm to 6mm will not reduce the flow? I ' ll give a try otherwise I 'll put another pump with small reservoir
03-21-2007, 06:23 AM
sreedx2

Quote:

Originally Posted by elk

Your temperature ??????????

is that Pentosin with UV die ? if so which die :D
03-21-2007, 11:46 AM
GuitarFreak1857

italian soldier, what res is that?
03-21-2007, 03:05 PM
italian soldier

Quote:

Originally Posted by mcoffey

really great build. First time I've seen tubing done like that. I'm not a big fan of rapping tubing usually, but realy like what you've done with yours.

congrats on a great build.:clap:

andyc

The tube have inside the spiral ;)

Quote:

Originally Posted by GuitarFreak1857

italian soldier, what res is that?

My res is:
Lunasio Bobble X-Trap-6515/Pro
03-21-2007, 03:21 PM
bundymania

still under construction...some nightshots :

http://img465.imageshack.us/img465/2196/redtest1pv0.jpg

http://img74.imageshack.us/img74/6084/redtest3ge0.jpg

http://img74.imageshack.us/img74/5060/redtest5kb2.jpg
03-21-2007, 08:55 PM
Polizei

That first picture... watch out for a possible kink between the MOSFET blocks... looks like it might.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 10:46 AM.

XtremeSystems