ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

Printable View

Show 100 post(s) from this thread on one page

06-20-2007, 12:31 PM
jugeen

Quote:

Originally Posted by andyr(uk)

Hi , does anyone have a link to Prime for quad ? thanks

ftp://mersenne.org/gimps/P95V253.ZIP
06-20-2007, 12:44 PM
bingo13

There should be a five series BIOS out in the next couple of weeks, officially. They have added to additional settings to Transaction Booster, when enabled it will have 0~3, in essence, the 3 setting will be equal to or a little better than Memset performance level 4. Additional memory ratios will also be opened up and the chipset latencies will be improved when using the 200/266 straps. I have been testing 0603 for the P5K3 BIOS with the changes listed above and then some. ;)

Quote:

Originally Posted by msgclb

The P5KD 0403 bios is up on

ftp://ftp.asus.com.tw/pub/ASUS/mb/so.../P5K%20Deluxe/

I successfully flashed to 0403 from 0311. On the initial boot I had a check sum F1 message but all the boots since have been successful after I set my defaults.

The one change that I've noticed is on the JumperFree Configurations page. I believe it's the much awaited option:

FSB Strap to North Bridge [Auto], 200MHz, 266MHz, 333Mhz

Attachment 60769

At this point I'm not sure what this change means.:rolleyes:
06-20-2007, 01:56 PM
Machinus

This is all on water...what kind of temps/clocks are the limit for P5K+6600 chips on air?

WATER:
E6600 - 4.0+
Q6600 - 3.6+

AIR:
E6600 - 3.5+
Q6600 - ?
06-20-2007, 02:20 PM
msgclb

I'm down with a knock out!:mad:

My P5KD shutdown and now when I boot I get a message that I have a 'CPU fan error!'. It looks like my pump quit working.
06-20-2007, 03:25 PM
Eagleclaw

OK proly a dumb question but I have to ask before I go out of my mind.

I have been running stable at 9x410. Flashed to the new BIOS no problem.

Changed all my settings back, again no problem BIOS showing 3.7ghz.

I boot to XP and the multiplier changes to 6x410!!

I am sure I missed a setting somewhere, can anyone please help?

thanks

edit: tried 8x466 and it still reverts to 6 multiplier in Windows, I didn't install anything in XP so what the hell is changing my Multiplier?
06-20-2007, 03:29 PM
safan80

Quote:

Originally Posted by msgclb

The P5KD 0403 bios is up on

ftp://ftp.asus.com.tw/pub/ASUS/mb/so.../P5K%20Deluxe/

I successfully flashed to 0403 from 0311. On the initial boot I had a check sum F1 message but all the boots since have been successful after I set my defaults.

The one change that I've noticed is on the JumperFree Configurations page. I believe it's the much awaited option:

FSB Strap to North Bridge [Auto], 200MHz, 266MHz, 333Mhz

Attachment 60769

At this point I'm not sure what this change means.:rolleyes:

Thanks for posting this I will add the bios to my sig for more people to see.
06-20-2007, 04:22 PM
crossg

Quote:

Originally Posted by Eagleclaw

OK proly a dumb question but I have to ask before I go out of my mind.

I have been running stable at 9x410. Flashed to the new BIOS no problem.

Changed all my settings back, again no problem BIOS showing 3.7ghz.

I boot to XP and the multiplier changes to 6x410!!

I am sure I missed a setting somewhere, can anyone please help?

thanks

edit: tried 8x466 and it still reverts to 6 multiplier in Windows, I didn't install anything in XP so what the hell is changing my Multiplier?

Speed Step enabled maybe?:)
06-20-2007, 04:26 PM
Speederlander

Quote:

Originally Posted by bingo13

There should be a five series BIOS out in the next couple of weeks, officially. They have added to additional settings to Transaction Booster, when enabled it will have 0~3, in essence, the 3 setting will be equal to or a little better than Memset performance level 4. Additional memory ratios will also be opened up and the chipset latencies will be improved when using the 200/266 straps. I have been testing 0603 for the P5K3 BIOS with the changes listed above and then some. ;)

Then I am going to wait in flashing this BIOS. No need to invoke the small risks involved if I will be updating again in a few weeks.
06-20-2007, 04:27 PM
xgman

Quote:

Originally Posted by crossg

Speed Step enabled maybe?:)

It's that C1 thing in bios under cpu. Disable all that cpu stuff in there and it will go back to normal. I had the same trouble initially.
06-20-2007, 04:55 PM
Eagleclaw

That was it! running 8x460 right now

Thanks guys!
06-20-2007, 05:02 PM
CedricFP

Quote:

Originally Posted by msgclb

I'm down with a knock out!:mad:

My P5KD shutdown and now when I boot I get a message that I have a 'CPU fan error!'. It looks like my pump quit working.

I used to get that for not having a fan plugged into the CPU fan header.

Had to go to hardware monitor in your bios and ignore fan speed.
06-20-2007, 05:10 PM
xgman

Funny after loading 0403 I came up in vga mode and vista loaded pci bridge again and then I had to re-install my forceware drivers for some odd reason. After that everything was fine.
06-20-2007, 05:14 PM
Eagleclaw

Yup same here.

Also with the new BIOS my temps are WAY down at the same speed and VCORE, just guessing 10-15c lower readings in speedfan and Coretemp

Anyone else seeing this?

Quote:

Originally Posted by CedricFP

I used to get that for not having a fan plugged into the CPU fan header.

Had to go to hardware monitor in your bios and ignore fan speed.
06-20-2007, 05:18 PM
safan80

Quote:

Originally Posted by xgman

Funny after loading 0403 I came up in vga mode and vista loaded pci bridge again and then I had to re-install my forceware drivers for some odd reason. After that everything was fine.

same here, I had to reboot before vista was happy.
06-20-2007, 05:20 PM
xgman

Quote:

Originally Posted by Eagleclaw

Yup same here.

Also with the new BIOS my temps are WAY down at the same speed and VCORE, just guessing 10-15c lower readings in speedfan and Coretemp

Anyone else seeing this?

unfortunately vcore set 1.65v in bios still reads 1.58-1.59v in hardware monitor and pcprobe 2. I didn't see any temp difference.
06-20-2007, 05:28 PM
orion23

Quote:

Originally Posted by xgman

Funny after loading 0403 I came up in vga mode and vista loaded pci bridge again and then I had to re-install my forceware drivers for some odd reason. After that everything was fine.

Same here, but this is the second time that after updating bios I have to install the Nvidia drivers again.
06-20-2007, 05:35 PM
xgman

Quote:

Originally Posted by orion23

Same here, but this is the second time that after updating bios I have to install the Nvidia drivers again.

It must be changing something on the board that vista thinks is new hardware code I guess.
06-20-2007, 05:36 PM
crossg

@msgclb Thanks for the bios info.

Quote:

Originally Posted by xgman

Funny after loading 0403 I came up in vga mode and vista loaded pci bridge again and then I had to re-install my forceware drivers for some odd reason. After that everything was fine.

I really hope I don't have to relaod the Nvidia drivers that is a pain in the A$$ but thanks for the warning at least I can download them and be ready.;)
06-20-2007, 05:44 PM
xgman

Quote:

Originally Posted by crossg

@msgclb Thanks bios for the info.

I really hope I don't have to relaod the Nvidia drivers that is a pain in the A$$ but thanks for the warning at least I can download them and be ready.;)

At least they didn't force a uninstall like they do when you upgrade them.
06-20-2007, 06:55 PM
orion23

Quote:

Originally Posted by xgman

At least they didn't force a uninstall like they do when you upgrade them.

Yeah, I was happy about that as well!

I hate the new Nvidia installation procedure!
06-20-2007, 06:58 PM
Severance

1 Attachment(s)

After a bit of a wait i finally got my OCZ alpha titanium memory back from rma and they seem to like this board. Boot at 499fsb using setfsb up to 520fsb, 2.25vdimm set in bios.
06-20-2007, 07:43 PM
`danny

So there is a BIOS setting to ignore cpu fan? I bought a silverstone 121B for my typhoon that I'll be using on my P5k Deluxe and it won't plug into the standard cpu connector so instead I plan on using a molex connector.
06-20-2007, 07:51 PM
jcniest5

Quote:

Originally Posted by `danny

So there is a BIOS setting to ignore cpu fan? I bought a silverstone 121B for my typhoon that I'll be using on my P5k Deluxe and it won't plug into the standard cpu connector so instead I plan on using a molex connector.

It will still have a one wire that goes to the CPU Fan connector for monitoring reason (if I'm mot mistaken).
06-20-2007, 08:03 PM
`danny

ok because I tried the fan out of my old lan party and the fan would not be powered up if I just plugged it into the cpu fan pins. So are you saying that I would have to plug the fan into the cpu fan pins and a molex connector for control purposes?
06-20-2007, 10:21 PM
sobih25

ftp://ftp.asus.com.tw/pub/asus/mb/so...eluxe/0403.zip

new bios, 0403.
testing mode on ;].

Show 100 post(s) from this thread on one page