New RAM List!!! (now with 1GB stick listing too)

Printable View

Show 100 post(s) from this thread on one page

02-09-2005, 08:40 AM
Punisher!

Quote:

Originally Posted by steve-0

do you believe it now?? ....

Yeah, I have received more inputs, and that's why :D.
02-09-2005, 08:41 AM
Punisher!

Quote:

Originally Posted by TEDY

friend has CORSAIR XMS 3200LL 1.1 and SPD reports 200 2-3-2-6 , why ? weird.

Are you sure about revision?
If they don't support 2-2-2-5 they could be CH-5 or Infineon B-5. Ask your friend to try.
02-09-2005, 02:21 PM
TEDY

CMX256A-3200LL XMS3205v1.1

0322048-4

XMS3200 256MB 400MHZ 2326
02-09-2005, 03:22 PM
funkflix

Corsair PC3200 C2 Rev. 5.1

http://people.freenet.de/funkflix/corsairc2label.jpg

http://people.freenet.de/funkflix/corsairc2ic1.jpg

Mosel Vitalic ICs! Very bad overclockers!
02-09-2005, 08:46 PM
perkam

Whats the deal with Hynix D43, ppl on Newegg are claiming that the Geil Ultra Platinum PC-4000, which is listed as Hynix D43 can do:

Quote:

I am running totally stable at 271 1:1 2.9V 2.5,8,4,4

And at least 3 other ppl said the same thing. That may not be bh-5 or even bh-6 or even ch-5, but its got to be something !!!..

Perkam
02-10-2005, 10:37 AM
Punisher!

Quote:

Originally Posted by perkam

Whats the deal with Hynix D43, ppl on Newegg are claiming that the Geil Ultra Platinum PC-4000, which is listed as Hynix D43 can do:

And at least 3 other ppl said the same thing. That may not be bh-5 or even bh-6 or even ch-5, but its got to be something !!!..

Perkam

They are quite good, nothing exceptional. Those guys have been a bit lucky.
02-10-2005, 11:20 AM
perkam

oh...

*ty for bursting the bubble* :(

Always nice work though Punisher.

Perkam
02-10-2005, 11:35 AM
Punisher!

Quote:

Originally Posted by perkam

oh...

*ty for bursting the bubble* :(

Always nice work though Punisher.

Perkam

Np m8, always ready to help :D.
02-10-2005, 12:32 PM
chunkylover77

Punisher I submitted this thread for the front page news. Great job.
02-10-2005, 02:05 PM
annoncompgeek

Is there anywhere i can find a complelte breakdown of kingstons modules? The ones i have arent listed. I'd assume they were ch-5 because they easily do 200mhz 2-3-2-5 1t but i need to know for sure before i vdimm mod my av8.

ram chips labeled D32080X1T-5R
02-11-2005, 02:05 AM
Punisher!

Quote:

Originally Posted by chunkylover77

Punisher I submitted this thread for the front page news. Great job.

Thanks a lot m8. :banana:

What about sticking it too? :D
02-11-2005, 02:33 AM
funkflix

U can add the 3200C2 5.1 if u wish ..

http://www.xtremesystems.org/forums/...&postcount=124

;)
02-11-2005, 03:07 AM
Punisher!

Quote:

Originally Posted by GravediggA

U can add the 3200C2 5.1 if u wish ..

http://www.xtremesystems.org/forums/...&postcount=124

;)

Sure. ;)
02-11-2005, 10:17 AM
chunkylover77

Sorry Punisher but I cant sticky it. You have to talk to a mod for that.
02-12-2005, 05:49 AM
Punisher!

Quote:

Originally Posted by chunkylover77

Sorry Punisher but I cant sticky it. You have to talk to a mod for that.

PM sent. Let's see :D.
02-12-2005, 11:10 AM
bias_hjorth

Made it sticky - Superb job Punisher! :toast:
02-12-2005, 12:45 PM
Punisher!

Quote:

Originally Posted by bias_hjorth

Made it sticky - Superb job Punisher! :toast:

Thank you man! :toast: :D
02-14-2005, 06:09 AM
groovetek

dunno if this has been asked... but i'm trying to make sense of this line:

"-300 Mhz" = under 300 Mhz of about 5*(2,)3,4,5(,6) Mhz except rarity.

that being the 5*(2,)3,4,5(,6) Mhz bit...
02-14-2005, 10:12 AM
Punisher!

Quote:

Originally Posted by groovetek

dunno if this has been asked... but i'm trying to make sense of this line:

"-300 Mhz" = under 300 Mhz of about 5*(2,)3,4,5(,6) Mhz except rarity.

that being the 5*(2,)3,4,5(,6) Mhz bit...

In other words it means that they can reach at most (290 or) 285 or 280 or 275 (or 270) Mhz except rarity :D.
02-15-2005, 05:33 AM
shimmishim

question about the centon that can do ~+300

1. does anyone sell this besides directly from centon? and
2. is it the pc3200 low latency that is TCCD or the pc4000? cost difference is about $20

thanks!
02-15-2005, 03:25 PM
steve-0

Do you know what chips have a 512MB corsair c2 pc3200 rev3.2 ?

thank's in advance :toast:
02-18-2005, 07:03 AM
steve-0

Quote:

Originally Posted by steve-0

Do you know what chips have a 512MB corsair c2 pc3200 rev3.2 ?

thank's in advance :toast:

well, i already have it here, i expected to be a BH-5 part, but it isn't. it doesn't boot even with Cas 2. oh well, maybe it's broken or there's an incompatiblity problem... what do you think?
02-19-2005, 06:42 AM
blander

Quote:

Originally Posted by annoncompgeek

Is there anywhere i can find a complelte breakdown of kingstons modules? The ones i have arent listed. I'd assume they were ch-5 because they easily do 200mhz 2-3-2-5 1t but i need to know for sure before i vdimm mod my av8.

ram chips labeled D32080X1T-5R

hi, on my kingston hyperx 3200ak2 are chips labeled as D3208D13R-5A
but i hink its not ch-5, does someone know the chips?
02-19-2005, 06:23 PM
DaveX

wow gj, yours pwns my outdated one

http://www.xtremeresources.com/forum...t=32086&page=1

we have a lot of the same info (never seen this thread before, haven't visited here in awhile)

:toast:
02-20-2005, 04:35 AM
gundamit

2 Attachment(s)

Quote:

Originally Posted by Punisher!

Then search more... :D http://www.geilusa.com/dealers.asp
1GB = 1G = 1 GigaByte (no differences)
:D
Ultra Series and Ultra Platinum are different series.
Ultra Series are old Ultra-X Series (perhaps they contains Samsung TCC5)
Ultra Platinum contains Hynix chips.

I was standing in line over at Fry's yesterday (wanted to look for a replacement for my CBBID stepping A64 - no go) and saw that Geil PC4000 512mb sticks were still on sale for $80 a pop. Curiosity got the better of me and I purchsed a pair.

I threw them in my DFI NF4 rig and put them at their advertised timings of 2.5-4-4-7. On stick tops out at 267, the other 266. Nothing on the package says anything about voiding the warranty if I took a look under the super cheap aluminum/tin? heatspreaders so I pulled one off and took a picture.

Looks like the same GL3LC32G88TG-35 memory that was reviewed
here.

This stuff seems a lot like my Adata Hynix that I tested on my DFI LPUT, crapping out right around the same place.

Whatever it is it seems like a good deal for someone who doesn't have the volts to give to the TwinMos SP UT, or can't plow another $50 into some TCCD. Me personally, I would rather have the Speed Premiums or some killer GSkill. So what am I doing with this stuff? Curiosity kills cats like me! Darn! I'm such a :banana::banana::banana::banana::banana:! :rolleyes:
02-20-2005, 02:39 PM
longshot

I do not see OCZ PC4200EL modules on this chart? they are TCCD also on a Brainpower PCB
02-20-2005, 02:53 PM
Jackass

Quote:

Originally Posted by longshot

I do not see OCZ PC4200EL modules on this chart? they are TCCD also on a Brainpower PCB

yeah same with OCZ EL DDR PC3700 Platinum they are TCCD on BP808
02-23-2005, 04:08 AM
Punisher!

Added OCZ VX PC4000 (they are the same as PC3200, just guaranteed at 250 Mhz).
02-23-2005, 05:49 AM
shimmishim

hi,
after seeing this thread, i ordered the mushkin pc4400 to use with my epox 9nda3j and i haven't been able to hit higher than ddr540... even with 3-4-4-8 and 2.9 volts, i cannot hit anywhere near 300 with 1T.

with 2T, i can hit 300 with 2.5-4-3-8 and 2.85 volts...

i assumed that hitting 300 was with 1T or was I wrong to assume that?
02-23-2005, 07:18 AM
Punisher!

Quote:

Originally Posted by shimmishim

hi,
after seeing this thread, i ordered the mushkin pc4400 to use with my epox 9nda3j and i haven't been able to hit higher than ddr540... even with 3-4-4-8 and 2.9 volts, i cannot hit anywhere near 300 with 1T.

with 2T, i can hit 300 with 2.5-4-3-8 and 2.85 volts...

i assumed that hitting 300 was with 1T or was I wrong to assume that?

It depends on the motherboard too. Yeah actually they are meant for reaching almost 300 with 1T but actually I hadn't much inputs when I put them into the classification.
02-23-2005, 09:55 AM
shimmishim

i see. well thanks for the reply. how many other people have hit 300+ with the mushkin?
02-23-2005, 04:54 PM
dexx

Quote:

Originally Posted by shimmishim

hi,
after seeing this thread, i ordered the mushkin pc4400 to use with my epox 9nda3j and i haven't been able to hit higher than ddr540... even with 3-4-4-8 and 2.9 volts, i cannot hit anywhere near 300 with 1T.

Mushkin have a good deal on that memory atm. I tried ordering it, but got this message back: "We no longer offer individual customers online sales and shipping." :(
02-23-2005, 06:40 PM
shimmishim

yeah they are having a great deal! i got in on it but i'm very disappointed with its performance...

i have some g.skill 512x2 LA coming in soon so I'll see how these compare to the mushkin and keep the better of the two :)
02-23-2005, 09:24 PM
calcal

i have corsair twin1024-3200c2pt and their rev 4.1 they cannot run 2-2-2-5 timings @ 400 mhz and ive got it up to only 255fsb @ 3-4-4-8
these cannot do 300mhz
02-23-2005, 09:42 PM
calcal

http://www.newegg.com/app/ViewProduc...141-138&depa=1

can these run 2-2-2-5 timings @ 400 mhz with 2.6vdimm

do you have a link where u saw these @ ~ 300mhz?

i really want to get these
02-24-2005, 01:01 AM
Punisher!

Quote:

Originally Posted by calcal

http://www.newegg.com/app/ViewProduc...141-138&depa=1

can these run 2-2-2-5 timings @ 400 mhz with 2.6vdimm

do you have a link where u saw these @ ~ 300mhz?

i really want to get these

- All TCCDs do 2-2-2-5 @ 400 mhz.

- They could m8. I have no link of 300 mhz.
02-24-2005, 01:02 AM
Punisher!

Quote:

Originally Posted by calcal

i have corsair twin1024-3200c2pt and their rev 4.1 they cannot run 2-2-2-5 timings @ 400 mhz and ive got it up to only 255fsb @ 3-4-4-8
these cannot do 300mhz

Are you sure they are 4.1 and not 5.1? Because those sound like Mosel Vitelic ICs.
02-24-2005, 07:19 AM
calcal

my mistake its 4.2
but still shouldnt it be able to do 2-2-2-5 with any errors?
i got an error within 17 minutes

heres the full model #:
xms3202v4.2
02-24-2005, 01:22 PM
Punisher!

Quote:

Originally Posted by calcal

my mistake its 4.2
but still shouldnt it be able to do 2-2-2-5 with any errors?
i got an error within 17 minutes

heres the full model #:
xms3202v4.2

XMS-PC3200C2 Rev4.2 (2-3-3-6-1T) --chip--> Samsung TCCD & TCC5

All TCCDs support 2-2-2-5 @ 200 Mhz, then you have TCC5 and you must be happy with 2-3-3-6 :D.
02-24-2005, 01:45 PM
calcal

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
i need that 2-2-2-5 timings!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
if i leeave it @ 2.8vdimm would all the errors go away?

EDIT:::
i noticed it said SAMSUNG TCCD+TCCC
is it mixed or it could be either one?
02-24-2005, 05:12 PM
calcal

my cousin has twinx-3200c2pt
and his are revision 5.1
using that mosel chips
are those any good????
can they run 2-2-2-5 and overclock well?
02-25-2005, 12:44 AM
Punisher!

Quote:

Originally Posted by calcal

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
i need that 2-2-2-5 timings!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
if i leeave it @ 2.8vdimm would all the errors go away?

EDIT:::
i noticed it said SAMSUNG TCCD+TCCC
is it mixed or it could be either one?

For sure they aren't TCCC, but TCC5.

CAS 2 IS NOT MAPPED on TCCC.
02-25-2005, 12:45 AM
Punisher!

Quote:

Originally Posted by calcal

my cousin has twinx-3200c2pt
and his are revision 5.1
using that mosel chips
are those any good????
can they run 2-2-2-5 and overclock well?

Actually they aren't well-known to overclock high, anyway, just ask him to try and tell us!!! :D
02-25-2005, 10:10 AM
WiCKeD

Quote:

Originally Posted by shimmishim

i see. well thanks for the reply. how many other people have hit 300+ with the mushkin?

Didn't even know they switched to BP...

Screw the lame Mushkin deal, just buy the PQI guys, it's the best deal ($225): http://www.newegg.com/app/ViewProduc...141-138&depa=0 Mine each did ~280fsb individually. TCCD is TCCD and they use the best BP PCB. :cool:

For the record, I can't even recall 1GB of anything that has hit 300+ fsb with 2.5-3-3-X timings, 1T CPC and normal volts.

Nice thread Punisher, The Runner's info was getting dated. :toast:
02-25-2005, 10:18 AM
shimmishim

it's not a lame deal. my sticks do 290 fsb with 2.5-4-3-X timings 1T CPC individually...

together, they will not do above 275ish... pretty sure i'm board limited.
02-28-2005, 11:41 AM
Punisher!

Added OCZ VX Value and Twinmos with New BH-5 :D.
03-01-2005, 09:09 PM
calcal

is windbond ch-5 chips any good?
03-02-2005, 05:55 AM
Punisher!

Quote:

Originally Posted by calcal

is windbond ch-5 chips any good?

Yeah, quite good, not exceptional.
03-06-2005, 07:44 AM
perkam

Hmmm...anybody got any ideas for a DDR2 ram list with specs and stuff???

Cause if anyone wants to start one, I'm sure Fugger, FCG, Stilt and some others would probably have expertise in it too. Its really hard to know right now which DDR2 is good and which isnt, and the automatic answer seems to be the 1GB of EB 4200 Plat which is creme de la creme but not everyone can afford the high price.

So if anyone has any ideas, sorry if this is the wrong place for this post, thought ppl here could apply their skill on finding out ddr2 info too. ;)

Perkam
03-07-2005, 03:57 PM
TommyW

so which memory to buy?

GSKILL PC4400 550 TCCD or OCZ GOLD VX UTT PC3200 ??? :(

my new system soon:

3200+ 939 / DFI ULTRA-D NF4 / Sapphire X800XL / MEMORY ???
03-08-2005, 05:30 AM
funkymonkey

hi people.
I am soo tired of this really lame transcend PC3200.
So I was on the look out for new 1GB RAM for my A64 3200+.
Ny aim is to get RAM that will do 270-280Mhz @ 2.5,4,X at 1T
My budget is under $200.

So far I have come across GeiL Ultra series PC4000 ( GL1GB4000DC ).
Is this confirmed same as old Ultra-x with TCCD?
Any other which will suit my aim and under $200?
03-08-2005, 05:47 AM
Punisher!

Quote:

Originally Posted by funkymonkey

hi people.
I am soo tired of this really lame transcend PC3200.
So I was on the look out for new 1GB RAM for my A64 3200+.
Ny aim is to get RAM that will do 270-280Mhz @ 2.5,4,X at 1T
My budget is under $200.

So far I have come across GeiL Ultra series PC4000 ( GL1GB4000DC ).
Is this confirmed same as old Ultra-x with TCCD?
Any other which will suit my aim and under $200?

They are in the list. They should be Samsung TCC5 (perhaps some have TCCD too). Just try 2-2-2-5 @ 200 Mhz.

List updated with:
G.Skill
G.SKILL PC4400(DDR600 1T) (2.5-4-4-8 1T), PC3200 (2-2-2-5) 512M Kit (F1-3200DSU2-512FF/1GBFF) --chip--> Samsung TCCD (new production) ~ Brainpower PCB

Team Group
ASTAK DDR600 PC4800 (3-4-4-8) --chip--> Samsung TCCD ~ Brainpower PCB 808

Bye! :D
03-08-2005, 09:06 AM
pcnmechguru

Quote:

XMS-PC3200XL/XLPT Rev1.1 (2-2-2-5-1T) --chip--> Samsung TCCD

ok i have above ram but i cannot do anything above 200 fsb@2-2-2-5 1T no matter what volts i throw at it

best i can do is 250x10 ram is 5:6 @208fsb timings are 2.5-3-3-7 1T again no matter what juice i throw at it

also these seem to run a bit hot they idle @ 42 c with an open well ventilated case and 55-57 c after 3 hrs of gaming

i thought these were high 1:1 action sticks i guess not ?
03-08-2005, 11:34 AM
Punisher!

Quote:

Originally Posted by pcnmechguru

ok i have above ram but i cannot do anything above 200 fsb@2-2-2-5 1T no matter what volts i throw at it

best i can do is 250x10 ram is 5:6 @208fsb timings are 2.5-3-3-7 1T again no matter what juice i throw at it

also these seem to run a bit hot they idle @ 42 c with an open well ventilated case and 55-57 c after 3 hrs of gaming

i thought these were high 1:1 action sticks i guess not ?

LOL! Have you tested them with memtest @ default?
PSU?
03-08-2005, 01:30 PM
pcnmechguru

Quote:

Originally Posted by Punisher!

LOL! Have you tested them with memtest @ default?
PSU?

yes just ran memtest for 6 hrs at 2.5-3-3-7 250 ram @208 2.85 vdimm , no errors and ran them at 2-2-2-5 1T @200 fsb 2.8vdimm no errors either

PSU is a OCZ Powerstream 520 w
03-08-2005, 09:19 PM
Punisher!

Quote:

Originally Posted by pcnmechguru

yes just ran memtest for 6 hrs at 2.5-3-3-7 250 ram @208 2.85 vdimm , no errors and ran them at 2-2-2-5 1T @200 fsb 2.8vdimm no errors either

PSU is a OCZ Powerstream 520 w

I can't believe it... worst TCCD evah (even if the probem is another perhaps)...
Try following these timings:
http://m4tribes.m4d.it/puni/timing1.gif

Bye!

Motherboard?
03-09-2005, 12:42 AM
Ebola

The first post report OCZ4001024WV3DC-K being equped with UTT chips, but in the picture below, we don't seem to be at all in such case :o

http://www.moddershq.net/~reviews/Ba...sc000155ds.jpg

Sorry for the large picture, but i haven't got any resizer currently and btw i give the most detailed shot as possible
03-09-2005, 07:14 AM
Punisher!

Quote:

Originally Posted by Ebola

The first post report OCZ4001024WV3DC-K being equped with UTT chips, but in the picture below, we don't seem to be at all in such case :o

http://img57.exs.cx/img57/664/dsc000155ds.jpg

Sorry for the large picture, but i haven't got any resizer currently and btw i give the most detailed shot as possible

Actually they are (black die with just that little dot is the new UTT die)... just burn in them @ 2-2-2-5 and let us know! :D
03-09-2005, 09:14 AM
KoNiaK

Really good database, thanks for this work :toast:
But it mix 512MB and 256MB sticks, sometime it's hard to understand which size you're talking about.
03-09-2005, 05:14 PM
calcal

Hello i got another question

Are ch-6 anygood??????
Can they overclock very well?
Can they run 2-2-2-5 timings?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 12:37 PM.

XtremeSystems