Double top for d5, anyone have plans for something like that?

Printable View

Show 100 post(s) from this thread on one page

10-06-2009, 06:32 PM
Duniek

if someone can ship detroit top to me I can make copy of it but for double pump ;)

I bought D5 from user of this forum (so pump will be in my hands in next 3-4weeks)
10-06-2009, 06:52 PM
millertime359

Post if you hear back from him Sadasius. I was only looking for when I decided to sell mine last. Getting the T3 meant i didn't need it anymore. I'm assume the demand just wasn't there anymore for it seeing BP and EK both have tops that perform about as well. IMO, the Detroit's look better. I was going to talk to him about trying to stock his tops at crazypc.com seeing it is local for him.
10-07-2009, 03:23 AM
Sadasius

Quote:

Originally Posted by Duniek

if someone can ship detroit top to me I can make copy of it but for double pump ;)

I bought D5 from user of this forum (so pump will be in my hands in next 3-4weeks)

Wish I could help you but mine are running 24/7 in a crunching machine. Wish I had bought an extra one.

@Millertime.....Will do!
10-07-2009, 04:34 AM
Weevil

Quote:

Originally Posted by NaeKuh

:O

Blasphamy!! are u saying u know more about koolance then me?

The sky is falling...!!

http://www.koolance.com/water-coolin...pmp450a_p1.jpg

:rofl:

Iono which koolance you were looking at... but that looks like that black ring..

Im fairly sure all the tops use a ring of some kind. There would be no other way to secure the D5 motor.

And you would be setting yourself up on that breaking...
:\

Once again another bling > performance debate....
That ring is that thick for a reason.

This rings not nearly as wide.
http://ep.yimg.com/ca/I/sidewinderco..._2072_23609236
10-07-2009, 09:10 AM
DeanB

We actually released a new D5 top recently its called the COV-RP450. It works as a nozzle base or a reservoir base.
In the next couple weeks we'll have other reservoirs and accessories that will further compliment this system. :D

http://www.koolance.com/water-coolin...v-rp450_p3.jpg
http://www.koolance.com/water-coolin...v-rp450_p1.jpg
10-07-2009, 09:17 AM
millertime359

That's pretty cool Dean, but does it perform equal to a EK, BP, or Detroit Thermo top. That was the issue I had will the old one, it drop head pressure below the stock D5 head. :(
10-07-2009, 09:25 AM
DeanB

Quote:

Originally Posted by millertime359

That's pretty cool Dean, but does it perform equal to a EK, BP, or Detroit Thermo top. That was the issue I had will the old one, it drop head pressure below the stock D5 head. :(

I haven't received the test data yet but there have been improvements made to them since their initial release.
10-07-2009, 09:34 AM
Edward88

Quote:

Originally Posted by [Koolance] Dean

I haven't received the test data yet but there have been improvements made to them since their initial release.

Which material do you use for that top? hope no alu

Its really nice :up:

Works with ek multioption res?? If it does i will buy one of them :D
10-07-2009, 09:54 AM
DeanB

Quote:

Originally Posted by Edward88

Which material do you use for that top? hope no alu

Its really nice :up:

Works with ek multioption res?? If it does i will buy one of them :D

Its all acetal, there is a decorative piece made of aluminum that can be put on the outside of the pump.
10-07-2009, 09:58 AM
millertime359

Are you selling that cover alone? I might have to get that for my T3. It looks like it should fit.
10-07-2009, 10:06 AM
DeanB

Quote:

Originally Posted by millertime359

Are you selling that cover alone? I might have to get that for my T3. It looks like it should fit.

No but I can probably get one...
10-07-2009, 10:16 AM
Fafeifa

wow great i thought this is a thread talking about the D5 dual oh well anything goes then.
10-07-2009, 10:28 AM
millertime359

Quote:

Originally Posted by [Koolance] Dean

No but I can probably get one...

sent you PM :)
10-07-2009, 10:53 AM
skinnee

Quote:

Originally Posted by [Koolance] Dean

We actually released a new D5 top recently its called the COV-RP450. It works as a nozzle base or a reservoir base.
In the next couple weeks we'll have other reservoirs and accessories that will further compliment this system. :D

http://www.koolance.com/water-coolin...v-rp450_p3.jpg
http://www.koolance.com/water-coolin...v-rp450_p1.jpg

I like the looks of that. Nice improvement! :up:
10-07-2009, 11:55 AM
xaxis

It's official: I'm a closet Koolance fan. But I gotta come out.

... It slightly agitates me because I spent so much time refusing to even allow myself to look at Koolance products due to one bad experience with ... I can't even remember the product... It was possibly their first case/in built cooling solution... This must have been around 5-6+ years ago (more perhaps?). Despite my now forgone rage induced by the brand name itself... I see myself buying a number of Koolance products I've been looking at lately... Damn'it! :confused: ;)
10-07-2009, 12:34 PM
NaeKuh

Quote:

Originally Posted by xaxis

It's official: I'm a closet Koolance fan. But I gotta come out.

You need to pay your due fee's then...

:rofl:

Im the president of the club. :ROTF:
10-07-2009, 12:34 PM
Edward88

Quote:

Originally Posted by [Koolance] Dean

Its all acetal, there is a decorative piece made of aluminum that can be put on the outside of the pump.

It works with ek multioption res?? or not? :confused:
10-07-2009, 12:48 PM
DeanB

Quote:

Originally Posted by Edward88

It works with ek multioption res?? or not? :confused:

I doubt it :(
10-07-2009, 01:02 PM
Edward88

Quote:

Originally Posted by [Koolance] Dean

I doubt it :(

Bad news :(

Wish that koolance res for this top look nice and with a top of the res of acetal too.

And also not to expensive :p:
10-10-2009, 10:06 AM
Eddy_EK

2 Attachment(s)

OK, you gave me thinking for some hours.
Here is what I came up with. I think it is the best solution there could be made to link pumps together.
This is not final version. Plan si to make the antivibrating mounting fot 5,25" bay.
You'll find there also a possibility to mount reservoir via EK Multioption link.
Let me know what you think!
10-10-2009, 10:10 AM
Fafeifa

I would buy 1 :cool:

Quote:

Originally Posted by Eddy_EK

OK, you gave me thinking for some hours.
Here is what I came up with. I think it is the best solution there could be made to link pumps together.
This is not final version. Plan si to make the antivibrating mounting fot 5,25" bay.
You'll find there also a possibility to mount reservoir via EK Multioption link.
Let me know what you think!
10-10-2009, 10:20 AM
AndrewZorn

awesome so far
lots of screws, looks great

just make sure to keep it POM and not to give into that clear-plastic craze

EDIT the inbalance of hexagons created by the screws is kind of wierd, can they both be oriented the same way?
10-10-2009, 10:22 AM
bentleya

Wow Great job Eddie, You and your team are dam good :).
10-10-2009, 10:42 AM
skinnee

:shocked:

That's gorgeous!
10-10-2009, 10:42 AM
Edward88

Quote:

Originally Posted by Eddy_EK

OK, you gave me thinking for some hours.
Here is what I came up with. I think it is the best solution there could be made to link pumps together.
This is not final version. Plan si to make the antivibrating mounting fot 5,25" bay.
You'll find there also a possibility to mount reservoir via EK Multioption link.
Let me know what you think!

Thanks god that i send you that PM!!!!!

Thats what im talking about!

Thats awsome ed!!

I want one of thoseeeeeee!!! :up:

:clap:

Show 100 post(s) from this thread on one page