OC Report :: OCZ Blade 3x2GB PC3-16000 CL7

Printable View

Show 100 post(s) from this thread on one page

06-26-2009, 12:46 AM
Leeghoofd

We are benching the blades on a classie to this afternoon, hoping we can get them speeds too...

EDIT : We got them up to 1137Mhz with 1.7Vdimm on the classified :p (in fact I just watched to see that Massman didn't overvolt them lol)

http://users.telenet.be/OAP2/%a9pi32blades.jpg
06-26-2009, 04:56 PM
viking

Did anyone try this ram on Socket 775 setup ?
06-26-2009, 06:04 PM
drnip

Nice results 3oh6!!! Hopefully my RMAed ones will put like yours. Mine are black and 1 stick crapped its pants after 24 hours of use. Really a lil over a hour or two of use as I didn't get much time to play with them. Ran them at stock specs. There are too many horror stories of Elpida Hypers dieing left and right.
06-28-2009, 12:55 AM
Leeghoofd

Continued testing on the Gene II 2200Mhz PI32m stable with B2B 10

http://users.telenet.be/OAP2/Gene%20II/GeneIImaxram.jpg
06-28-2009, 01:18 AM
eva2000

nice work... B2B 10 ??
06-28-2009, 05:07 AM
Leeghoofd

Back to Back CAS delay (aka the performance killer ) Massman is working on my collected data to get a small review out of what it does and how it influences ram bandwith
06-28-2009, 05:18 AM
eva2000

Interesting.. will keep an eye out for that review for B2B :)
06-28-2009, 06:45 AM
Leeghoofd

At the moment we only find it in the Asus bios and MSI is adding it too on their lineup... The Asus setting is too tight, resulting in stability issues when running eg 200Bclock/2000mhz ram in triple channel config.
06-29-2009, 11:01 AM
dj883u2

My Ocz:

http://img20.imageshack.us/img20/4494/16131906.th.jpg

:up:
06-29-2009, 03:35 PM
gandalfone

Interesting try 8.9.8.x....I sow raja setup and great spi32m 6'42''
I will try it, but under LN2....on h2o I get 1100 8.9.8.24 1.72v
08-15-2009, 04:51 AM
3oh6

after getting the PC3-17000 Blades, these PC3-16000's have been sitting on a shelf but i brought them out last night
for some AM3 fun. they seem to clock 8-9-8 as well as their big brother and don't mind the 1200MHz area at all :D

http://3oh6photos.com/forum_post/xs/...758_-90C-1.png
08-15-2009, 05:05 AM
hiwa

really nice AM3 jody and crazy moduls there
Congrats
share you RTL's if is possibile ;)
08-15-2009, 05:17 AM
3oh6

Quote:

Originally Posted by hiwa

really nice AM3 jody and crazy moduls there
Congrats
share you RTL's if is possibile ;)

thanks. share my RTL's? why not just ask me to strip and prance around on all fours :D

67-69-71 :up:
08-15-2009, 05:22 AM
hiwa

:yepp: you are man

Thanks for shating
08-15-2009, 05:43 AM
Leeghoofd

Quote:

Originally Posted by 3oh6

thanks. share my RTL's? why not just ask me to strip and prance around on all fours :D

you ain't got no boobs (I presume), not interested, I'll pass this time :rofl:

Nice clocks sir, 1.75 ELeet is 1.75 real or even more ? 1.65 set in bios was over 1.72 on our board :(
08-15-2009, 06:13 AM
3oh6

Quote:

Originally Posted by Leeghoofd

you ain't got no boobs (I presume), not interested, I'll pass this time :rofl:

Nice clocks sir, 1.75 ELeet is 1.75 real or even more ? 1.65 set in bios was over 1.72 on our board :(

you shouldn't presume anything :D

E-LEET is pretty much bang on for vDIMM on my board. i am not sure if they needed that much. my PC3-17000's will run this with 1.70v so these being a little weaker at 7-8-7/7-7-6/6-7-6 in 32M, i figured set 1.75v and forget about it.
08-15-2009, 06:30 AM
eva2000

nice clocks mate.. time for some blade 16000 + 17000 @12GB action hehe
08-17-2009, 03:42 AM
Aerou

Quote:

Originally Posted by eva2000

nice clocks mate.. time for some blade 16000 + 17000 @12GB action hehe

damn ... You don't give that IMC a break, do you? :D
08-19-2009, 05:31 PM
gandalfone

Very nice shot jody!!
10-03-2009, 08:05 AM
TONY GAL

my friend i buy this rams with black pcb and the rams is very bad..
play 2000 with 7-8-7-20 wants 1,79 volt and not 1,65 and the chips says inside ocz ocz x43e1288ak-125b
this chips is not elpida HYPER BECARFUL THE OCZ 7-8-7-20 WITH BLACK PCB is very bad, BIG PROBLEM GUYS!:mad:
10-03-2009, 08:47 AM
rabor

Quote:

Originally Posted by tonygr

my friend i buy this rams with black pcb and the rams is very bad..
play 2000 with 7-8-7-20 wants 1,79 volt and not 1,65 and the chips says inside ocz ocz x43e1288ak-125b
this chips is not elpida HYPER BECARFUL THE OCZ 7-8-7-20 WITH BLACK PCB is very bad, BIG PROBLEM GUYS!:mad:

Bollocks.. mine have black pcb's too & they are running @ 1000MHz 7-8-7-21 T1 with 1.63V since March..

So either they're faulty, or you need to give them a little more vQPI/vVTT. Mine need 1.45V on both Rampage II Extreme & EVGA Classified 760, regardless what CPU..

Edit: Just swap them. You got lifelong warranty.
10-03-2009, 10:16 AM
TONY GAL

Quote:

Originally Posted by rabor

Bollocks.. mine have black pcb's too & they are running @ 1000MHz 7-8-7-21 T1 with 1.63V since March..

So either they're faulty, or you need to give them a little more vQPI/vVTT. Mine need 1.45V on both Rampage II Extreme & EVGA Classified 760, regardless what CPU..

Edit: Just swap them. You got lifelong warranty.

qpi=1,47 and vtt like 1,47-1,55
the rams play 2000 with 7-8-7-20 with 1,74 in bios real 1,78 ,i tried to play 7-7-7-20 1900 and nothing with 1,80 real only 7-8-7-20 with 1,78 real 2000
10-05-2009, 07:23 PM
Ronbo56

I just received a brand new set from amazon, but due to their incompetent shipping dept. all three modules were thrown out of their packaging. One pcb was bent. Tested the other two and they booted at 7-8-7-20 1T on a classified, 920 DO at 3 gigs. When I oc to 4200 my system would not even boot no matter what settings I had. It refused to boot at 7-8-7-20 1T. No problems with my mushkin redlines, so much for OCZ I think the new hypers if they are hypers are not worth the time or money
10-05-2009, 07:43 PM
eva2000

Quote:

Originally Posted by tonygr

my friend i buy this rams with black pcb and the rams is very bad..
play 2000 with 7-8-7-20 wants 1,79 volt and not 1,65 and the chips says inside ocz ocz x43e1288ak-125b
this chips is not elpida HYPER BECARFUL THE OCZ 7-8-7-20 WITH BLACK PCB is very bad, BIG PROBLEM GUYS!:mad:

ouch, if you test each 2GB module individually how does each do ?

Quote:

Originally Posted by Ronbo56

I just received a brand new set from amazon, but due to their incompetent shipping dept. all three modules were thrown out of their packaging. One pcb was bent. Tested the other two and they booted at 7-8-7-20 1T on a classified, 920 DO at 3 gigs. When I oc to 4200 my system would not even boot no matter what settings I had. It refused to boot at 7-8-7-20 1T. No problems with my mushkin redlines, so much for OCZ I think the new hypers if they are hypers are not worth the time or money

ouch any photos of the mess ??
10-05-2009, 11:55 PM
hiwa

sent a kit like 2 weeks ago to rma, hope to get hypers
will post when they back ;)

Show 100 post(s) from this thread on one page