Duniek's ITX cases

Printable View

Show 100 post(s) from this thread on one page

04-28-2009, 04:27 PM
Junimrox

i googled for picopsu and found some interesting things, everything is very small, except the price =P
Great build, I really appreciate this small builds, and the cooler getting air directly from the outside is perfect!
04-29-2009, 12:58 AM
s0lid

Smallest pc on XS eh?
I bet theres a lot smaller ones based pico-, nano-itx and some smaller. Smallest possible would be around 8x8-9x9cm based to 3x3" beagleboard which have omap3530 arm cpu but still capable for running kernel modified ubuntu linux and other distros too.
I have one little smaller one dimensions: 189mm x 189mm x 65 mm, little wider than yours but smaller in cubic cms :D
04-29-2009, 01:29 AM
Duniek

Quote:

Originally Posted by s0lid

Smallest pc on XS eh?
I bet theres a lot smaller ones based pico-, nano-itx and some smaller. Smallest possible would be around 8x8-9x9cm based to 3x3" beagleboard which have omap3530 arm cpu but still capable for running kernel modified ubuntu linux and other distros too.
I have one little smaller one dimensions: 189mm x 189mm x 65 mm, little wider than yours but smaller in cubic cms :D

I never see any pico/nano with custom mod
also new case is 180x184x46mm
04-29-2009, 01:48 AM
s0lid

Quote:

Originally Posted by Duniek

I never see any pico/nano with custom mod
also new case is 180x184x46mm

http://www.xtremesystems.org/forums/...3&postcount=44 there's couple small ones.

Hmm let's see can i snip couple mms out from my own SFF case :p:
04-29-2009, 02:42 AM
SnW

That's pretty cool man :up:
04-29-2009, 02:19 PM
Duniek

some new pics (poor) but after 100% finish will be better

http://img259.imageshack.us/img259/3440/76912554.jpg
http://img259.imageshack.us/img259/1984/57097728.jpg
http://img259.imageshack.us/img259/994/42109727.jpg
04-29-2009, 02:44 PM
Chris_redfield

Quote:

Originally Posted by s0lid

Hmm let's see can i snip couple mms out from my own SFF case :p:

I've heard of two blokes argueing 'mines bigger than yours,' but never 'mines smaller than yours,' before :rofl:

Thats some really nice work there though Duniek.

And those are pretty sweet systems you linked to as well s0lid. I had seen the top one before but the bottom one is awesome.
04-29-2009, 10:45 PM
s0lid

Quote:

Originally Posted by Chris_redfield

I've heard of two blokes argueing 'mines bigger than yours,' but never 'mines smaller than yours,' before :rofl:

Thats some really nice work there though Duniek.

And those are pretty sweet systems you linked to as well s0lid. I had seen the top one before but the bottom one is awesome.

Hehe here's one pretty small and cool http://metku.net/index.html?path=mod...kypc/index_eng :D

Going to make my case around 180x180x40mm from 5mm plexi glass :P
04-29-2009, 11:30 PM
Chris_redfield

Thats cool.

My favourite nano itx mod that I ever saw was someone put one inside of a Millenium Falcon action figure.

They put LED's in the :banana::banana::banana::banana:pits and everything it looked amazing I just can't harness the power of google right now to find it.
05-11-2009, 06:58 AM
Duniek

this is "normal" mini itx
nano itx will be smaller :D
05-11-2009, 10:00 AM
Smartidiot89

Quote:

Originally Posted by SyntheticOrange

Man whats with everyone making sweet little cases?

Im gonna have to go make me one :D

Excelent work!

I want a small piece of art like this under my TV as an emulator box!

Nice work man:up:
05-13-2009, 02:30 PM
Duniek

new case incoming
dimension will be about 200x200x85mm
specs: 9300 itx wifi + 2,5" hdd in scythe quiet drive + 2x fans 2x92/2x80 or 2x100

I bought cooler (380gram copper) + made custom enclousure from plexi; total cost 12$ with shippings :D
http://img141.imageshack.us/img141/4332/74304992.jpg
05-15-2009, 03:11 PM
VisBits

Cool, I wondered how you would set that up :)
05-15-2009, 07:35 PM
Duniek

I am planning to make new case from copper :D
05-15-2009, 10:21 PM
mattd390

Quote:

Originally Posted by Duniek

new case incoming
dimension will be about 200x200x85mm
specs: 9300 itx wifi + 2,5" hdd in scythe quiet drive + 2x fans 2x92/2x80 or 2x100

I bought cooler (380gram copper) + made custom enclousure from plexi; total cost 12$ with shippings :D
http://img141.imageshack.us/img141/4332/74304992.jpg

This maybe a stupid question but is the stock GPU heatsink going back on there? These boards are great for a lot of uses. Awesome cases too btw!
05-16-2009, 03:56 AM
A2C

Realy, realy but realy nice cases :eek:
05-17-2009, 03:20 PM
Duniek

plan changed :D
case will be from COPPER :eek:
05-18-2009, 10:16 AM
Mod_Aap

Quote:

Originally Posted by Duniek

plan changed :D
case will be from COPPER :eek:

A full copper case. :cool:
That will be heavy. :shocked:
05-19-2009, 01:26 PM
s0lid

Did somebody say slim mini-itx case :hrhr:
http://www.intel.com/Assets/Image/pr...45GSEJT_lg.jpg
http://www.intel.com/products/deskto...T-overview.htm

At highest point that mobo is only 20mm thick, so if used material is 2mm aluminium, total case thicness would be only around 25-26mm and only around 176x176-8mm long/wide :p:
05-19-2009, 01:36 PM
ILikeCosmosS

i have different idea but i think its possible

get pcie ribbon and get a 4770 (only takes 50 watts) lay it flat and then on the zotac 9300 just get q6600 + 8gb/4gb ram in 2 dimms
then a the new 150watt pico psu (2 of them 1 for gpu and 1 for the cpu)
then a slim drive and a 2.5 convential drive on top of the motherboard then simply get the dimmensions and create your own case
the only bad factor is that it will be rather long and maybe a little taller (due to the slim drive)
05-19-2009, 03:04 PM
Duniek

Quote:

Originally Posted by Snot aap

A full copper case. :cool:
That will be heavy. :shocked:

:hrhr: 4,5kg (200x200x70-80)

Quote:

Originally Posted by s0lid

Did somebody say slim mini-itx case :hrhr:
http://www.intel.com/Assets/Image/pr...45GSEJT_lg.jpg
http://www.intel.com/products/deskto...T-overview.htm

At highest point that mobo is only 20mm thick, so if used material is 2mm aluminium, total case thicness would be only around 25-26mm and only around 176x176-8mm long/wide :p:

yap, but damned 9mm SSD 2,5" thinkess :p:

Quote:

Originally Posted by ILikeCosmosS

i have different idea but i think its possible

get pcie ribbon and get a 4770 (only takes 50 watts) lay it flat and then on the zotac 9300 just get q6600 + 8gb/4gb ram in 2 dimms
then a the new 150watt pico psu (2 of them 1 for gpu and 1 for the cpu)
then a slim drive and a 2.5 convential drive on top of the motherboard then simply get the dimmensions and create your own case
the only bad factor is that it will be rather long and maybe a little taller (due to the slim drive)

q66 + gf7300 not work good with FSP 270W PSU
(q66/g31/2gb/2,5" hdd takes on load 130W
on150W psu(8A 12V) not possible

but for itx quad? e7200/e8200 is enough a hell lot for that board + maybe 96/9800gt eco :O
05-19-2009, 09:58 PM
s0lid

Quote:

Originally Posted by Duniek

yap, but damned 9mm SSD 2,5" thinkess :p:

I were thinking of using Mini Pci-E SSD.
http://p.gzhls.at/424496.jpg

http://geizhals.at/eu/a424496.html
06-03-2009, 09:36 AM
Duniek

new two cases in progress
dimensions will be 190x190x96mm and second 200x200x110(115) but with DVD drive
Will be powered by picopsu 200W, 9300itx, e7200 stock 1,05Vcore, 2x1gb ram, 9600gt LP

I made test of this mobo this evening with E5200 ,1,225V + 0,3V on bios
pushing it to 3,9ghz rock stable cooled by copper heatsink + 92mm fan @ 5V
tempsin HW monitor 79*C, on thermo I saw 48*C max on base of heatsink

http://img199.imageshack.us/img199/8472/tnimg1354.jpg
06-06-2009, 05:54 AM
Hidetaka

Where did you get these standoffs? They seem to be much longer than regular ones you get with cases.
06-06-2009, 06:22 AM
whuzabi

they looks like from silverstone my from the tj07 are 1,5cm

great projekt i like it :) are u finished yet ?

Show 100 post(s) from this thread on one page