can't open itQuote:
Originally Posted by ceemic
Printable View
can't open itQuote:
Originally Posted by ceemic
F5?
http://ceemic.pri.ee/hardware/hd3870/ this works?
Nicely done!:up:Quote:
Originally Posted by ceemic
Sweet I've done one close to it ina a x1900xtx once, using a V12, but i found it way heavy..Quote:
Originally Posted by ceemic
what about overclocking using modded sapphire bios @ 1.38v 3D? vgpu needed urgently
http://www.techpowerup.com/vgabios/7...12.080116.html
New BIOS? Max clock limit removed?
sweet, But take care cause gigabyte also have ddr4 3870.... if u try it let me knowQuote:
Originally Posted by ceemic
Barr3l Rid3r, if You look close, You'll see, that it's DDR3. On TechPowerUp, there's 3 different Gigabyte HD3870 512MB DDR3 BIOS versions. The mentioned one is newest. BIOS ver .760 :P
2 different .070 are there also...
Also the def clock are all 780/950 :)
Giga's DDR3s are all Qimonda 1.0ns?
Quote:
Originally Posted by ceemic
nope, they do have hynix 1.0ns....
I tried the bios now and it result in black screen, thx I have an ATi Rage PCI to rescue me....
well I've edited to 900Mhz in mem only, and will try again later.
That's bad:(
Mine has Qimonda 1.0ns. How can I be sure, that the newer BIOS siuts for my card?:shrug:
I have plenty of PCI VGAs, but I've never "blind flashed"...
Haven't changed the BIOS yet, but now I searched the max core clock without any mods:D
972/1080 http://ceemic.pri.ee/45nm/47574.jpg
958/1071 http://ceemic.pri.ee/45nm/79534.jpg
"open_window_mod"; outside temp ~4C:D
Finally I got my Gigabyte HD3850 512MB Ultra Durable card.
I'm having problems though, I can't get Rivatuner to change the core clocks on the card, it simply won't stick.
What version of riva tuner and perhaps ATI Tool do you guys use?
After I plugged the card in my computer my monitor decided to show everything in pink..:D
Everything is pink now, even when I use the monitor with my laptop...haha!
It seems like the monitor got a "pink virus" from the card..who knows?:ROTF:
Anyway, som help on specific programs and versions would be helpful, thanks!:up:
I used that bios (on first page) for 3850 512mb and there is still lock...830 is max...Everything above that freeze...
Any other bios?
Anyone tried the newest Giga DDR3 BIOS?
All is solved!:up:Quote:
Originally Posted by Clint
Pink color was from bad VGA cable, Riva tuner don't like 2003 OS.
After voltmod I get:
1.27v gives 871MHz
1.35v gives 931MHz
all under a modified NV Silencer 5, load temp stays under 58C ;)
wth how :DQuote:
Originally Posted by Clint
is that stable? I have to push it to 1.37-1.38 to get there (stable under 100% gpu load)
Quote:
Originally Posted by raibemunn
Same as mine, it did 930Mhz for 3D06 loop using 1.38v but ceemic has a bigger cooler...
P.S. > Don't try latest ver 76 bios, I got blank using that @780/900Mhz
To get recovered use a USB cell-phone and a PCI card (for those who don't have a floppy)
Rev. A12 R670 is coming and it should bring some extra clock
Hmm, that's bad to hear about 76. For what it's ment to then?:rolleyes:
Isn't there any way to edit the original BIOS to remove the limit? Some hex values to copy from 3850?:shrug:
Yup, ATI tool stable.:DQuote:
Originally Posted by raibemunn
It's pretty obvious Gigabyte aint binning the cores, they only slap the Hynix mems on there (actually downbinned 1.0ns chips :)) and change a few caps to lower the costs, this is a classic product differentiation to meet the market.
I had a hunch about this when I saw that the Ultra Durable design was the same on both 3850 and 3870.
I get a little bit lower stable clocks on the memory with this bios than with the original one...a 2.0v mod on the memory should solve that.
They do not run hot at all @ 950MHz, barely warm actually..so I'm pretty confident they will perform as 1.0ns versions when given their rated voltage.
I'm going to grab a couple of trim pots and do some proper mods instead of pencilmods next weekend.
Quote:
Originally Posted by Clint
sweet, waiting for them... Igoing to get an Abit IX38 tomorrow
Quote:
Originally Posted by ceemic
hey man, what about 3D06?
I got a DS3 +8400 now...
Barr3l Rid3r, I hate 2006, it's so crappy without quad:D
Quote:
Originally Posted by ceemic
it's not u can chalenge others whos har dual core...
Barr3l Rid3r, only test@2006 before vmod: http://ceemic.pri.ee/45nm/13858.jpg
Aircooling powwa: http://ceemic.pri.ee/45nm/81153.jpg :cool:
Outside temp -1C; Vgpu=1,76V :ROTF:
At the same clock on 3D2003, it crashed several times during Nature:(
Quote:
Originally Posted by ceemic
Sweet man....
almost as mine, but I Got a DS3 and a cheap memory...
http://img171.imageshack.us/img171/6862/dsc04529xs3.jpg
3DMark06
http://service.futuremark.com/compare?3dm06=5542276
13880
Super PI 1MB
10.6s
Atitool is better for ovrclocking then Riva?
Good scoor for that CPU clock:up:
OCZ is cheap? :D My A-data 2x1GB costs ~73$/~47€ ;)