Printable View
uhhh... i like to see your chip do 1.34V @ 3.6ghz.Quote:
Originally Posted by Infa
im kinda amazed at that chip myself.
But he has absolutely no Vdroop. So im guessing a Vdroop mod??
L631B here:
http://i125.photobucket.com/albums/p...lipboard02.jpg
ummmmm i think her upper limit is 3.750 @ 1.6V i dont want to go any higher.
So what voltage are you running in the pic ?Quote:
Originally Posted by NaeKuh
http://img408.imageshack.us/img408/8...0042mo4.th.jpg
http://i121.photobucket.com/albums/o...2/Shot0042.jpg
E6600 L631F (yeah F sucks) ambient 23C(getting hot here in Cali)
thats 1.67V set in bios ... how much it droop i dunno PC Probe says 1.63, 1.62v.. while Everest/Speedfan says 1.54v .. which i dont think that a boaard can droop .13v ... anyway load 57C, idle was like 32C i forgot doesnt matter ..
heres one with Asus PC Probe:
http://i121.photobucket.com/albums/o...Shot0056-1.jpg
blend means nothing ... that temp was prolly the lower one ... blend has 2 phases .. 1 stresses CPU which is 5C higher, and 2 stresses RAM which is lower .. blend just switches between the 2
oh yeah i did 5 hours of orthos small fft couple days ago .. but forgot to screenshot it
234234
If you can, avoid these new batches.
I tested L640A quickly and it was orthos stable at 3.4GHz with 1.41V (watercooled)
Max clock with colder water (22 c) was 4GHz:
Attachment 57843
With dry ice this s**t did only 4.3GHz no matter what voltage I used.
No wonder why prices are dropping in this month :(
Still no reason to complain imho :rolleyes:
hey largon i bought mine from overclock-uk really good store. usually takes 2 days by royal air mail to reach me ( live in joensuu= alabama of finland:D )Quote:
Originally Posted by largon
Just got my L647G413 and looks like it is a voltage hog. Need 1.5 for 3.65Ghz, but not for sure yet. Passed an hour of orthos so far.
Gonna start with high volts and ween it down.
what could you get it to post with stock volts .. or some orthos as well ? it really scares me I do not want to get a crappy clockerQuote:
Originally Posted by turtletrax
Post results ASAP :) :)
Here is my 29B, I am not super impressed
oh sorry my voltage was 1.45V after dropp it comes out to 1.4V
Currently dual primeing 8x500, 1.648v after droop. This is just madness. Any lower voltage and either prime95 would just not run even for 1 minute. Load temps 46c for both cores (ambient temp 3c)
Nope, crash after 30 mins. It's not worth it. Crappy conroe I've got.
what your batch #Quote:
Originally Posted by Jultsu
Gonna sell my L647G413. Looks like it is stable @ 3.6 with 1.51Vcore, running 1066 strap ram @ 1ghz. But I found a L629A that has seen 4ghz on mild watercooling. Gonna see what I can do with it :)
L632A896Quote:
Originally Posted by sreedx2
L640A - hit 3.0Hz before having to up vcore from 1.325. Need 1.55 to maintain orthos stability at 3.4GHz.
These new batches stink! I wish I would have jumped on the bandwagon earlier.
Jeez..my L628A266 is not good at all
I need 1.525 v bios setting/powerslope on..DMM idle/load is 1.5v to hit 3500
I would love 3600 at same vcore but it just reboots 3Dmark05..which a real quick test of stability if you use cpu test 1 & 2
that sounds like my 29A .. very poor as well .. found the sweet spot at 3.3 1.42V loaded
man I am getting scared seeing all these new batches
Just to sidetrack abit here, how did you get speedfan to monitor your NB temp?Quote:
Originally Posted by sreedx2
he he .. :) I put a 2 pin thermal sensor on it which is connected to the MBQuote:
Originally Posted by |2ed |ey
Just bought a E6600 L651B588 and was able to reach 3.35ghz with stock voltage but crashes upon starting Orthos. Runs 3.2 stable on stock voltage.
Currently doing Orthos at 1.50volts at 3.53ghz. 1.55volts at 9x400=3.6ghz errored in 5 minutes.
Running on Gigabyte DS3 revision 3.3 motherboard with F11A bios and TT Big Typhoon and open case.
I must be the first person here with a batch that is in 2007.
E6600 L707A625
I have no idea how I got this batch. It says pack date of 4/17/07, that's madness! Intel put this processor on an airplane and flew it to Seattle where it ended up at Fry's!
Well, it kind of sucks. I'm trying to do Orthos on it at 3.40ghz with 1.52V (1.46 after Vdroop) and so far it's run 10 minutes without crashing. It was failing after 6 seconds (!!!) of Orthos at 3.6 and it failed after 3 minutes of Orthos at 3.44.
I'm not real optimistic at this point. Temperatures are through the roof, I have Scythe Ninja (original version) and 120x38mm 88cfm Panaflo and I'm getting 60C during this Orthos run with ambient at 35C. I don't think this is safe for everyday use. Oh well. Gotta keep burning away I guess.
I sure hope i get a good chip. My E6600 arrives TODAY......
Ordered my chip from Zipzoomfly last Friday (2 day air)
Received Batch: L649G Pack Date 4.12.07
I don't think anyone here as tried a 49G ? I get the rest of the equipment today but won't have my thermalright eXtreme until Thursday.