but the Retails need unnormal Voltages for these Clocks ...
not 1,55 like ES on Water but 1,65 on SS
Printable View
but the Retails need unnormal Voltages for these Clocks ...
not 1,55 like ES on Water but 1,65 on SS
looks like retail got same problem as merom/yonah, fsb limited bij cpu :(
.
no, it is not a FSB limiation, the Retails are simple bad to overclock my E6600 runs atm @ 3,7 by 1,54 V ... PrimeStable
Explain my situation then if it's not a FSB limitationQuote:
Originally Posted by Kabauterman
Max. benchable FSB @ boxed air: 455x6
Max. benchable FSB @ SS: 485x6
Max benchable CPU @ boxed air: 3708MHz
Max benchable CPU @ SS: 4357MHz (mobo limited)
Looks like FSB limitation to me...
but it is a Mobo FSB limitation not a CPU FSB Wall like Yonahs
Why does misteroadster run 566x9 with stock vMCH with the same board?Quote:
Originally Posted by Kabauterman
I tried almost every setting to go past that 485 wall with SS but non worked. Even the settings from VictorWang didn't made a change.
But I'm pretty sure that my mobo will go past 500MHz FSB with a 2MB CPU or a 4MB ES.
I think the CPU isn't the limiting factor ... in some German Forums are Lists with Max FSb on P5WDH
http://www.forumdeluxx.de/forum/showthread.php?t=256507
Nice .....but last 5 post where talking about the asus p5b so that's isn't the issue here :stick:Quote:
Originally Posted by Kabauterman
accually we should test it by putting my retail in rol-co's board.
say its more like tis ;) .
975X is good for retail with 4MB
965 is good for retail 2MB
965 with 4MB retails = big problems
but ES seems to not have any problems with the bords ;)
Quote:
Originally Posted by blind_ripper
but not the P5WDH without Mods ...
No mods, no fun ;)Quote:
Originally Posted by Kabauterman
can i get stable @ 3,5ghz with retail 4mb & 975x (no mod) by air?Quote:
Originally Posted by blind_ripper
cause my E6600 haven't arrived yet :(
:stick: i cant look in to the futeur :DQuote:
Originally Posted by jozzy
M.Beier is right :p: no mods no fun .
yep,......easy, thats "only" 388 fsb, 400 must be no problem for this combination without mod'sQuote:
Originally Posted by jozzy
Quote:
Originally Posted by blind_ripper
Not true, I had a lot of fun with DFI NF4/Expert without a single hardware mod :D
The best board is the one that does not require a single hardware mod for extreme oc :)
And I sincerely hope there will be such board for Conroe :)
Hi~ :) Rol-Co
VMCH 2.3V Is possible?
In my case, freezing Window(2.12V Higher set)
To inform a method :D
i think my is the absolutly :banana::banana::banana::banana:ing P5WDH on the world ...Quote:
Originally Posted by M.Beier
FSB 395 without Mods (vMCH 1,65V)
FSB 425 with !!! 1,95 V !!! Stable :eek: that is so bad ...
2,3 and up is possible , but only with pci graka, pci-e goes black above 2.15 or freez up indeedQuote:
Originally Posted by OC_Windforce
pci-e boot @ 1.84 and when the screen goes on set the voltage to 2.08 ,with this way 3d is possible
every reboot the same way
pci doesn't matter up to 2,45v :D
Quote:
Originally Posted by Rol-Co
oh~! PCI graka :woot:
Very Thanks :slap:
In my case (NB Water Cooling)
-> http://www.xtremesystems.org/forums/...d.php?t=112001
Quote:
Originally Posted by OC_Windforce
same here , chilled water
32m 500fsb done on air.....:D
Quote:
Originally Posted by Rol-Co
oh~ same chilled water :)
Became the help where you writing is many.
Wow~! Good Result(32m 500fsb done on air.)
I'm Korean.
It very like the Guus Hiddink football supervision of you country. :D :D
And he is the hero of my country..
I have decidet to buy me a DQ6, the P5WDH is a nice Board but it's need to much vMCH to get High FSBs
or the p5b , is a nice board tooQuote:
Originally Posted by Kabauterman
.
but 12phases are very nice ...