Quote:
Originally Posted by Rezag1000
Sounds like a PEW.
Printable View
Quote:
Originally Posted by Rezag1000
Sounds like a PEW.
Cooling? Nice chip, congratz.Quote:
Originally Posted by mongoled
That's easy... go there:Quote:
Originally Posted by Tibu
http://superpi.radeonx.com/
yesterday i found my 24/7-settings. @ this time my machine runs @ 10x260 2 2 2 5. vcore is 1,53v, vdimm 3,4.
later this day i´ll show some results in the other thread.
So far the best I can do with these econo GSkill 2-3-3-6 3200's using memtest86+ v1.55 is:
FSB=241(ddr-482) at 2.5-4-4-8-1T with 2.7 vdimm
HTT=3x 2430 MB/s
Not bad for a $100 2*512MB kit I suppose???
Even stretching to 2T I cant get past 246-(ddr-492) but take a huge hit....
Does anyone think I can do better without spending $200-ish aka TCCD's???
I thought that a pair these might be a viable option in the same price range:
http://www.newegg.com/OldVersion/app...218-405&depa=1
which are Winbond AA4T's but dont wanna do a vdimm mod and dont know if I could do better with 2.8 vdimm max?????
Appreciate your opinions.....
Now for the better news.....
My 3200 LBBLE 0515GPBW does 266*10 runnin a 166 ram divider at default vcore (1.35)
Its currently cpu-burnin testin at 270*10 with same ram divider so far, so good with a .05 bump to 1.40 vcore. Max loaded temp is 41C, system at 28C... :slobber:
gotta say I'm very impressed and happy so far... :D
Hello mate, sorry to hear you keep getting unlucky with your chips. Do you live in europe? I thinking of getting a SD and so i will want to shift this chip if i get a good SD. Ive seen your posts and cant help but feel for ya.Quote:
Originally Posted by dnottis
The chip is on water, and the shim is off. Im only running the fans at 7v so there is more in the chip but this will be my present 24/7 setting
http://homepage.ntlworld.com/m.meliou/2900mhz_1.7v.gif
I got a screenie @ 3ghz but is just a suicide shot, will post tht in the other thread
Mines a 0516CPBW, maxes just shy of 2700 @ 1.7vcore, though I think the board might be limiting me a little (just a little though). I run 2600 24/7 @ 1.55vcore.
how much benefit is there to removing the shim on the cpu? does it cool better without it?
Quote:
Originally Posted by HousERaT
I believe the removing the heatspreader is good for watercooling and phase change? Because if we use HSF i scared it may crushed the core?
well I got my Venice and the rest of my setup last week and ever since then it has been an overclocking nightmare that has given me a headache. I've got a 3500+ Venice CBBLE 0512DPAW and I cannot get this thing clock worth crap at all. I did a search for that code and it came up at anandtech and those 2 guys were havin probs gettin theirs to OC past 2.6, yet on [H] forums there is a thread and 2 guys state that they got theirs to 2750 (one on air 1.7vcore and the other on water 1.4vcore). I will give you the rest of my rig sepcs and I would greatly appreciate if I could get some help with this. I am new to the A64 but have been learning it very slowly.
MSI K8N Neo2 Platinum
3500+ Venice
Thermalright XP-90 w/ Vantec Tornado
2x512 PDP Patriot PC3200+ XBL
BFG 6800GT OC
520w OCZ Powerstream PSU
If there is any other info needed just let me know. I can be reached on any of the messengers in my profile if that is how you wish to contact me me or just post in here.
Thanks.
EDIT:I got my vcore maxed at 1.55 and 10%, I got the vdimm at 2.8 or 2.85, and my memory settings are 5:6 (233mhz) 2.5-3-3-6-10-16 1T (asreported by CPU-Z). Right now I got it running at 285*9 which is 2565. I had it up to 295*9 and it was prime stable for 13+ hours but then I was told to try OCCT and it failed that right away. SO I dropped to 290*9 and still failed OCCT. Dropped to 285*9 and still failed OCCT. I am still running the shipped BIOS of 1.5 in my board.
EDIT2: I just flashed to the official 1.8 bios. Yes my ram is TCCD.
Got my Venice earlier today, looks like a good batch :D
LBBLE 0516GPBW
DFI NF4 SLI-D
OCZ4200EL
X850XT
Watercooled (ambient around 30 degrees)
http://img.photobucket.com/albums/v6...Venice160v.jpg
And the added thermal resistance (read heat retention) to go w/ it.
I remove mine after I am reasonably sure the chip is 'OKAY' (read not rma - able since works to specs). Takes me under a minute w/ single edge razor blade and CAREFUL FOCUS on what I am doing.
CAVEAT: CPU CHIP IS CONVEX (think cup upside down). I lap them w/ 2000 grit sandpaper on FLAT glass and even I get a slightly reduced edge (Maybe due to not taking enough off, better safe(HAH) then sorry). This of course is NOT for the unsteady of hand and / or faint of heart.
If you go through all that:
Spring loaded WC and even a hyper6 (AIR) with proper clamping should be okay. Thermalright XP... has a VERY GOOD chance of CHIPPING the core since the putting it on moves it ACROSS the chip. (This is based on Personal Xperience).
I clamp stuff very tight and no issues there. Also I can clamp w/ a hyper6, or WC much better than w/ an XP...(too springy) so the temps are lower.
So if HSP stays on - all coolers above okay to good.
If HSP comes off - NO THERMAL RIGHT CLIP ONS! (if you have old screwon, OKAY!)
:toast:
Quote:
Originally Posted by arj
Our cpu's are 1 week apart: same batch
LBBLE 0515GPBW
I'm on air with an Alpha PAL-8150 currently burnin in at 270*10 with 1.40 vcore... :eek:
I would so far have to agree,,,,, a good batch???...
somebody knows this stepp ?
LBBLE 0516CPAW
Z637424D50xxx
well just got a 3000+ LBBLE 0516CPBW today from monarch i'll see how well it does later on today. it seem everyone with these have been maxing out at 2.7.
does anyone use OCCT for testing stability?? I was told to use it even after my cpu primed for 13+ hours. Ever since I have tried to use it, it hasn't made one full pass at all. I even flashed to the 1.8 official BIOS from MSI and only oc'd to 210 and it still failed. That is ridiculous and I am guessing that this prog has a problem with A64.
Looks like my chip just wanted more voltage. I bumped it up from 1.45 to 1.55v and it is priming right now @ 2.5ghz. What is the highest voltage it is safe to give a venice with air cooling? Also, what should the maximum temp be?
Thanks
It might just be OCCT unstable. But still it might be stable for many other tasks.
Is it stable while gaming ?
yeah it is pretty much stable except for the OCCT. I can't seem to get this thing to atleast 2.7 stable tho. Seems that <2.65 is about all that it will handle. Anyone help me out with this?
Quote:
Originally Posted by Rezag1000
What's your batch? I think 1.6v is a good limit on air. i see some people on 1.7v and on air, it's scary =/
agreed ! i had my winny up to 1.65 (bord max) and it was around 50c loaded, BUTTTT. i dont like the idea of that 24/7 ;)Quote:
Originally Posted by webbyboy
Yeah, at 2.6 Ghz, @ 1.54v, it failed Prime95 within seconds. I decided to run this thing at 2.4ghz, even though it is stable @ 2.5 ghz for several reasons.
1. Lower temps
2. It allows me to have a smaller divider (3/4 instead of 2/3)
3. Allows me to have a higher HTT (x4 multiplier instead of x3)
4. lower volts (which makes 1. true)
I was kind of dissappointed by my chip, I was expecting 2.6ish and possibly 2.8ish. I even waited 2 months for venice. Oh, well, at least I got it to 2.4!!
My temps were also very good! normally 40-45C load
Quote:
Originally Posted by Rezag1000
Thats too bad man, hell you could've gotten 2.4 out of a winnie. All 9 of my winnies did 2.4 Ghz - it was pushing past 2.5 Ghz and beyond that they had issues.
dumb question I gotta screenie in my attach files options...
how do I get it into this reply opened instead of linked???
@bonzer = your ram is too slow man, 225 and cl2.5? I thought that is gskill?
What shop did you pick yours up at and was it Retail or OEM?Quote:
Originally Posted by bonzer
It is Gskill, their $100 1-gig 2-3-3-6 econo stuff which I can get to 241 at 2.5-4-4-8-1T.... oh ya at 2.8 vdimm, mobo's stock maxQuote:
Originally Posted by Napoleonic
Plenty fast for me dude this is a $425 total revamp... excellent ROI I must admit........... schpanky :slapass:
9nda3j = 100
ram = 100
cpu = 200.... retail from sparco
8150 = 25
Maybe there is some truth to this '-PAW' thing (for that matter, check out the CAA2C in my sig :)). I just checked all my ole 0441-0447 Winnies that run 2728-2763:
3000+ @ 2748, 1.580 volts = RPAW
3200+ @ 2728, 1.480 volts = RPBW
3500+ @ 2763, 1.488 volts = RPAW
I'm at work so I can't check my other 2763 mhz 3500+, but I know it is an 0441Txxx.
At the time, I thought the 'Rxxx' was the key to good cores.
Actually, the first two CPUs above are not maxed out yet, but I would guess they top out at 2760-ish like the 3500+s. I can bench Aquamark, 3DMark2000/2001 at 2794-2800, but the other two Marks are no go.
The CAA2C does SuperPI 32M at 2880, 1.617 VCORE.
Man my venice is crap =( Whats all this talk about high OC at stock vcore?? lol Mine cant do anything at stock vcore..I still havent found a max stable prime setting. 2.8 is unstable as well as 2.75. What is the highest you can go on vcore for these venice chips?
Help me please... :(
http://www.xtremesystems.org/forums/...ad.php?t=62237
Clevor,Quote:
Originally Posted by Clevor
can you prime95 small FFT at these settings???
I had to bump from 1.40 vcore to 1.475 to get 2700 MHz stable (4 hrs in my book)..
those winnies are all outstanding, no need for a venice... :toast:
P.S. I could superPi 32M at 2700/1.40 vcore....... EASY
If it aint prime it aint stable.................. ouch 48C
Just posted my EPEW results, im satisfied, but was hoping for more at less voltage.
I'm probably going to RMA it for a refund, along with the DOA DVD Burner i got.
Sorry, not into Prime. If the rigs pass all four Marks and Aquamark, maybe SuperPI 32M that is good enough for me :). This can be an adventure as some CPUS don't like one Mark or the other. The rigs are gaming stable in that they will run 30' of the IL-2 Sturmovik and SS2nd Encounter demos with no lockup or error box.Quote:
Originally Posted by bonzer
About the highest I might aspire for is getting banzai 3DMark runs off for the ORB (who wouldn't?), or gaming for a couple of hours. And I don't even do that.
I got two 38mm thick, 120 mm fans blowing in the case, and two 120 mm fans blowing through my HC200 unit, and they pick up dust fast. Heck, this is one reason I don't bother to burn in my VX/UTT stuff too.
If I had to guess, they would Prime at 2700 at the same voltage. Pretty much par for the course for a good chip. The CAA2C seems to be a good one, though.
Man, these DPBW's and GPBW demolish my CPBW. One letter off of 200mhz more. :P
I guess we use our rigs for different reasons, Being a DBA for the past 8 years and an avionics tech 13 years prior to that, I frequently run MS-SQL and Oracle 9i/10g usually at the same time to try and break'em and keep on top of things, also do alot of video editing as well as some gaming. I run 24/7 and I havent found a system that will withstand my normal usage without passing memtest and prime/small FFT for 4 hrs minimum, usually overnight.Quote:
Originally Posted by Clevor
To assume your rigs are stable at these speeds runnin a few video benchies or superPi is misleading and accomplishes nothing more to this forum than provide bogus information. I thought you guys/gals had a higher standard than that??? more into about gettin a screenie at some 'fictional', very temporary setting in order to what???????????????
I'm not bashin here but trying to illistrate the fact that some of you may be giving yourselves a false sense of security and to hopefully bring everyone to the same playing field (standard testing). This is the only way we will be able to make any accurate assumptions about the stress levels our hardware can handle............. just IMO
P.S> Didnt your mama teach you to NEVER assume anything? :nono:
I totally agree with the other comments in this thread abt removing the shim, i have had a drop of over 10C in temps and gained an additional 50-70mhz in max prime95 stable overclk. Where as be4 my temps on load were reaching 54C+, im not passing 42C nowQuote:
Originally Posted by HousERaT
:)
This is all on warm water, fans are running at just over 5V. I havnt gone as far as madmikee, not sure i want to risk losing this chip
;)
Shim? You mean the IHS? BTW, those are infact copper right? My friend thinks they're aluminum...I think they are copper because I know I saw a guy lap one and it was all nice and shiney copper.
Has anyone noticed any differences between say a 3000+ or 3200+ ?? I was going to go with a 3200+ because, honestly I don't know, I like starting off at 2GHz lol....but damn I could save $50 and get just as high of an OC it seems like being that I'm seeing these 3000's hitting 2.8GHz and beyond...I don't know what to do!
Yeah IHS, lol.Quote:
Originally Posted by Nubius
Didnt know they were copper, if u got tccd then 3000+ ok, if u aint then got for 3200+ or higher
Heatspreaders are nickel-plated copper. Hold one in your hand. WAAAAY too heavy to be aluminum.
Well got my 3000+ !
http://home.quicknet.nl/qn/prive/pjm...enice_2900.JPG
Cooling : 100 % Air (Hyper 48)
Far faster than i could ever dream !
32M SuperPI or Prime screen shots?Quote:
Originally Posted by SmokeyTheBandit
Will get to that when i have the time but heej one hell of an first impression :toast: :banana: :woot:Quote:
Originally Posted by TheMeatFrog
Agreed :D :toast:
What stepping that venice? :)Quote:
Originally Posted by SmokeyTheBandit
Says in the pic. ;)Quote:
Originally Posted by matt`
Ok I have had experience with 2 3200+ venice processors so far, and here are my findings:
3200+ 0516EGPW from Monarch CAN DO 2.67GHZ MAX(prime, memtest, 3dmark stable) on air at 1.7v(1.6 effective with the k8n neo2) THE MAX speed it allowed the RAM to run at was 267mhz not 1mhz more, my WINCHESTER 3000+ allowed 300mhz
3200+ 0516EPEW from Newegg CAN DO 2.7GHZ MAX under the same environment. It seemed as though the EPEW had a slightly better memory controller as it allowed 270mhz and took longer to fail prime95 with tighter timings, but still only a 30mhz difference. The results were ultimately unimpressive when compared to those of others in this thread, however they are realistic.
The monitored temperatures under load never rose above 42C under prime95 with my T.T. Big typhoon and dropped down to as low as 32C when Idle. They only rose above 42C when I force Fed the cpu 1.8v just to see how far it would go on high vcore, but still the max was 2.67-2.7.
I did try RAM dividers, high vdimm, I upped the rails on my ocz powerstream 520, but after days of trying and trying I realized I had hit the ceiling in terms of the overclockability of these particular chips.
So good luck to all who got the good chips, but beware that some of these do suck.
Quote:
Originally Posted by Deus Falsus
I am with ya on that as far as getting luck of the draw chips. I understand that the game of overclocking is always by chance or luck and so far I have found 2 results of chips with my exact code failing to do 2.6 and I have seen 3 results of chips with my exact code doing 2.75Ghz+. Now I found the 2 poor results before I found the 3 excellent results. I honeslty dunno whut to do or where to go with this. I dunno whether to honeslty believe the ones that got so high or not. I do believe the ones that couldn't get 2.6Ghz stable cuz I have the same problem. One of those chips was on a DFI NF4 and the other was on the same board as me (MSI K8N Neo2 Platinum). Granted most of you are prolly now going to point out that I contradicted myself (overclocking is hit or miss but some are hard to believe) but I dunno how else to put how I FEEL about it.
I got my +3200 from Ncix today they only got them in stock yesterday, batch info is lbble 0515 apaw.
Using an Msi neo2 plat. came with bios 1.5, booted fine correctly id'd chip.
Having a problem with temps... reporting 42~idle to 50~ load with Xp-90 and 92mm tornado? Installed bios 1.8 same issue. Anyone know a bios with working temps, and best for Ocz rev. 2?
First I tested how far it will post and had it in bios at 3100mhz on my frist try on 1.450vcore, didn't try for more.
Right now i'm just installing windows and I got it running 2800mhz no problem on stock vcore, take a look i'm hoping for 3ghz stable :D
What is the recommened max vcore? I would post picture but I need somewhere to host it. Anyone know a good place?
SO FAR I THINK THESE CHIPS ARE THE SHIZZ :banana: :banana: :banana: :banana:
It's specially frustrating to see some Winchesters reach higher clocks. True that most of it is luck, yet I believe people from now on should not only post their steppings and OC pics but also post which E-tailer and they got the cpus from and the amount they paid altogether as well as the date. To improve "luck" I would say steer away from the newegg 3200+s which ship from their NJ facility and from the Monarch 3200+s that ship from GA. My $.02.
Quote:
Originally Posted by 4rory
Did you order in Canada or in the U.S.?
Canada I'm in torotno.
Quote:
Originally Posted by vapb400
I Couldn't agree more, though It isn't as bad for you as it's been for me and some others, I got 2.7ghz max out of my EPEW and 2.67ghz out of my EPGW.
That was fast, Thanks. Do they ship from the same warehouse for both U.S and CANADIAN orders, cuz it sounds like they have some good chips in stock.Quote:
Originally Posted by 4rory
Why do you say that? I have TCCD and was planning on getting a 3200+, but like I said I keep seeing ridiculously good scores with the 3000+ as well. I figured the 3200+ would atleast also give me slightly better multi options.Quote:
if u got tccd then 3000+ ok, if u aint then got for 3200+ or higher
Yeah I knew they were covered with something and yes when I held an AMD64 CPU I thought it felt nice and heavy...plus like I said I could have sworn I saw someone on these threads lap it and it was nice and shiney copper.Quote:
Heatspreaders are nickel-plated copper. Hold one in your hand. WAAAAY too heavy to be aluminum
Well on the Ncix forums someone that had preordered also got the exact same batch I did, he hasn't tried it yet but, will and said he will post results. They got them yesterday, forums admin had been saying that amd was producing +3200 as fast as they could to fill damand... seems like they downgrades lots of chips.
Heres the link to Ncix, http://www.ncix.com/forums/index.php...t=13&subpage=1
I still need help on these temps, what kind of temps should I be getting with this setup Xp-90 and 92mm Tornado? Case temps are 23c same as room.
Heres a screeny
http://www.geocities.com/roryleal/Sofarsogood.JPG
Jaiks i can't get past 2,7G with my 3200+ venice....this sucks :mad: .3,10p bios 2,5G with dewfault vcore.....LBBLE0517BPDW
Daysleeper where did you get your venice from? it all seems as if though these cpu's overclockability decreases as it matures. Hence the latest batches have completely sucked?
I'm at 2850mhz prime95 stable on stock vcore, I need to find somewhere to download bios 1.36 modded for the Msi K8N Neo2 Plat. then maybe I can get 3000mhz stable :banana: :banana: :banana: :banana:
My Venice can't go more than 2.4GHz :(
3000+ LBBLE.
CBBLE's seem to do much better on average than LBBLE's.
http://www.lejabeach.com/MSIK8N/k8nneo2.html
try that, that's very good news what type of cooling, memory are you using
Glad to hear your chip is doing so well, 4rory.Quote:
Originally Posted by 4rory
I'm that other guy (:D), and I'll be posting results in a few days, probably next weekend at the latest.
I'm also curious to see how similar my results are to yours. Time and testing will tell! :cool:
Ok so far this is stable and a few mhz higher but I need more vcore now i think, 285fsb is not bad for stock vcore eh? :clap:
Yea can't wait to see how your chip does, that should be pretty interesting.
http://www.geocities.com/roryleal/hitawallnow.JPG
If someone can confirm that bios 1.36 modded will saport venice i'll install it.
can we keep that little hand washing thing between us, don't want people to think im dirty, I was just to excitied. :D
maaaaaaaaaan, I sure hope the batches aren't getting worse, this is why I'm going to pickup a 3200+ at monarch here in two weeks when I get paid again, so hopefully they don't keep degrading, with my H20 setup I wanted atleast 2.8GHz if not higher :(
It'll still be quite an improvement coming from 2.5GHz XP-M and only 200MHz with my RAM (damn board doesn't like the higher FSB's)
but still....after seeing all these damn high OC's I've gotten greedy without even getting on yet :P
i got 3200 venice and a dfi sli-dr tawian edition which motherboard bios is the best for the ocz rev2 platinum.
thanks
Is NewEgg right? Says Venice 3800+ and 3000+ run at 1.35/1.4V and the 3500+ and 3200+ run at 1.5V :confused:
Im collecting results of stepping and OC there. Pls contribute.
http://www.xtremesystems.org/forums/...ad.php?t=62353
I think the chips comming from Ncix.com will mostly be good overclockers because, ncix only got them on thrusday May 14, amd had kept telling them that they can't meet demand that there way behind, because they counldn't make them fast enough, and the eta date got pushed back twice. I think amd downgraded alot of chips to fill the huge demand the +3200 created.
Because Ncix had +3800 long time ago and then they got +3000, those were no problem but it took them forever to fill demand on +3200, so I think for a time alot of chips were just coming out at +3200 no mater how good they were. ;)
Quote:
Originally Posted by Lithan
I think so, damn my x800xl just died, i can't test the CPU till one week more, i'm so down with luck.
Dam thats expensive to lose, hope you have better luck with your chip.
Quote:
Originally Posted by 4rory
If you have read my previous post in this chan, i've gotten the same batch from you and Lithan sent to me and i've just recieve today and when i put the CPU into the system, it the screen is blank, tested it on my friend's pcie system it doesn't work too. I was very excited when i see you can clock 2.8GHZ. Too bad i've gotten find a PCI 2/4mb card to test it if i want. :slobber:
Your chip didn't work, or you tested your video car in both pc?
Yeah I just wondering is bios 1.36 modded for neo2 will support venice so I can try it.
Quote:
Originally Posted by 4rory
It's my X800XL that's dead.
Ok I finally fiqured out how to raise vcore you have to use the % ones lol
so I tried 3.3% added 4c to my idle and 5ish to my load so load now 55 touch 56 sometimes. I'm not happy with this, this is why I affraid to try higher. :rolleyes:
But I just had it in windows at 3000mhz with 1,5vore. I tried bios 1.36, only thing it has is lots of vocre which I don't want to use bios 1.8 suppose to be accurate temps, damn even with this tornado screening i can't get good temps. :mad:
3000MHz 1.5 volt and air cooling already amazing :)
btw I heard Neo2 reads temp 8 degrees above the real temp?
Where did you read that? 8c hmm if thats true then that means im doing 32 idle - 46 load... sounds better with the type of cooling I have, I dieing to test with higher voltages, but they said bios 1.8 read temps right, but temps have been the same with all bioses i've tested. Now i'm hoping for 3200mhz stable :slobber: :banana: :banana: :banana:
I've attach a thermal probe to the side of my heatsink where the heatpipes come out of...and i'm getting reading of up to 18 degrees lower. I have my tornado practically turned off. theres like 3 degrees diffrence between idle and load... even if actuall temps are 5 degrees higher... thats still good right?30+5 and 32+5...thats sound more normal my 3.0ghz c used to do no more then 40c with a thermaltake spark heatsink. whats the max vcore I should try?
http://forums.extremeoverclocking.co...d.php?t=170557Quote:
Where did you read that? 8c hmm if thats true then that means im doing 32 idle - 46 load...
dunno is that was right, but my Neo2 seems wrong tooQuote:
Unless of course, you have a MSI 939 board. Mine reads 6-9C above what they should be.
I got it stable now at 2.9ghz with a small bump in vcore. I think I was undervolting before lol 1.450? now its at 1.5 and 2.9 prime for half hour so far temps hit 56c in mbm but morstly around 54.
Anyone know what happens when an amd64 overheats? does it have the same protections intels have? thermal shutdown or throttling? or do they just die?
However 4rory's LBBLE seems quite good.
There is shutdown feature in the bios. Set it to whatever temp you want.
Bios works on the assumption that its right. I was hoping more for a internal chip control. :(
Ok the rig is set up and i'm lovin it. Venice 3000 stable at 2.610ghz @ 1.488v (1.525 in bios). My ram is crappy kingmax value pc3200 and i gotta run a 2/3 divider clocking it at 186m mhz, it wont pass memtest with 7/10 divider (this is at 2.5, 4, 4, 8 timings damn it). after this point the cpu just hits a wall, 295htt @ 1.5x110% starts booting windows but then the hd shuts down and computer reboots. my goal was 300x9 with a 2/3 divider for my crappy ram but looks like i'm gonna have to settle for 290. any suggestions? i would post screenshots but i dont know how (dont laugh).
I'm testing with the exact same ram lol 3200 kingmax 2.5 4 4 8 lol I'm waiting on Ocz Rev.2 sometime this week.
To take a screen shot just lay out the screen how you want it, then press print screen button then open up paint and paste it, then save as .jpg.
so on those commands that say like "CPU VID" and then has a percentage, is that how you gotta raise the vcore on these newer DFI boards?
is it a percentage of what the current vcore is? What happened to simply raising the Vcore to whatever you wanted directly and not this percentage crap
There a bunch of slackers instead of fixing real problems like these dam temp reading they add in % vcores :slapass: :slapass: :slapass:
with the EPGW OR EPEW expect to hit about 2.7ghz @ 1.6v give or take. Just don't dream of hitting 2.8 or 2.9 ever.
My EPEW wasn't stable at 2.7.Quote:
Originally Posted by Deus Falsus
lol, i know how to take the screen shot, i dont know how to post it in the thread.
Does anyone with a venice have phase? Just curious. All these seem like air and water. I just want to know if they have cold bugs.
Hi all,
3000+ 0516 CPCW from Trend4PC
2.6@9x289 1.55v amd stock cooling (~55°C load Prime)
prime & 3D rocks stable
more to come, I will add a screenshot asap
rig :
dfi nf4 ultra-d 414-1 - 3000+ LBBLE 0516 CPCW - 2x512 Centon LL @ 289 @ 2.5-4-3-6-1T @ 2.75V - Sapphire x800xl - enermax350
http://www.yamafoto.com/users/vroom/...1nah7kelwc.jpg
Is it possible you could provide prime95 screen shots showing your stable speed, for least 3hrs (not blend?). I want to determine if our max overclks of HTT and total clock speed are the same. Im very close to your clocks. I have prime95 stability with a clockspeed of 2922mhz for over three hrs. I believe their could be a bios limitation in the clocking of the HTT speeds. I wont get a chance to test the new bios till Monday. I hope to see you posting even better results in the near future with the aid of the new bios!!Quote:
Originally Posted by Jimbo Mahoney
Ive also found the chips to respond well to small temp drops, ive found tht by increasing the fans to 12V, which in turn drops the CPU temps by 8C, ive been able to gain more stabilty at even higher speeds. I like my PC quiet so a 2902mhz clockspeed with the fans at 5V is quite alright
:p:
Get the screenshots hosted somewhere (I use photobucket.com) and then link it here.Quote:
Originally Posted by shiznit93
No phase but did test it under DI. BIOS reported -45C and my 3200+ was going strong up to 3.3GHz. I could run 3D and SPi up to 3.1-3.2GHzQuote:
Originally Posted by trans am
Quote:
Originally Posted by arj
whats the stepping on your 3000+? i just ordered a retail venice 3000+ from newegg. i'm hoping for a CBBLE :D
LBBLE 0516GPBWQuote:
Originally Posted by faruquehabib
Whats the max vcore I should run with this chip on good air (xp-90 and tornado fulltilt)?
hey guys this is completely stable @ 2700 @ 1.52v ran CS:S for 6 hours super pi stable .
Running
stepping
lbble 0516 EPGW
270 x 10 no divider
rams 270 @ 2.5-4-3-7 3.0v
heres pics
My Venice is 2.85Ghz prime stable at 1.7v but I think I'll stick with 2.8Ghz 1.6v for 24/7 Folding :D
http://img.photobucket.com/albums/v6...hz160vcore.jpg
nice
heres 2700 @ 1.52 volts going for 2800 @ 1.6
2800 @ 1.696v cpu-z verified running 280 x 10 ram at 2.5-4-3-7 @3.0v