not bad for 1.08vid :up: thanx!Quote:
Originally Posted by hetsaq
Printable View
not bad for 1.08vid :up: thanx!Quote:
Originally Posted by hetsaq
nice! 5760x1080 monitor where art thou?Quote:
Originally Posted by Boulard83
Quote:
Originally Posted by bro20000
nice! what vid?Quote:
Originally Posted by bro20000
Im using 3 benQ G24 HD.
These 580 are really some beast. Waiting the EK block to be avalaible in canada.
fook 3 monitors gimmie 1 5760x1080 :D
actually id rather prefer 2:1 as 3:1 is too wide
after a seventh look ok 3:1 will do :)
stalker cop: ssao enabled+high quality at these settings very taxing :up:Quote:
Originally Posted by Neova
580 vs sli 580
sli
http://img217.imageshack.us/img217/7453/53135318.png
single
http://img522.imageshack.us/img522/5416/59170348.png
vsQuote:
Originally Posted by NapalmV5
default ultra settings
http://img130.imageshack.us/img130/2492/45467209.png
Thank you Napalm! I actually ended up at 910 core but these cards do not have a drop more in them even at 1.138. Pretty wild stuff
Quote:
Originally Posted by NapalmV5
Using 1.05vid! Got a water chiller coming in december hopefully should hit 1000+ with a proper 580 block!
Just been playing metro 2033 and the frame rate where amazing averaging about 57FPS all setting max out!
I got my replacement gtx 580. I'm having an issue though, it seems when I'm pushing the card past 930-9xx+ I get a frame hit. Why would I have lower frames? I'm not artifacting at all either.
improved sli performance
http://img139.imageshack.us/img139/6032/51805594.png
http://img530.imageshack.us/img530/4336/35053949.png
http://img143.imageshack.us/img143/8883/52704825.png
----------------------------------------------------
http://img140.imageshack.us/img140/1526/70970807.jpg
not a bad vid and nice i might give it a try just to see how sli performs @ maxQuote:
Originally Posted by bro20000
thanx!
i gotta ask :) what vid? hows gaming stability @ default clocks anymore issues there?Quote:
Originally Posted by bigKr33
try higher vgpu or gpu temp is too high try on max fan
So far the card is solid at stock clocks. It hasn't crashed at all in gaming (crosses fingers)Quote:
Originally Posted by NapalmV5
I've done max fan, and my temps are good. The highest voltage I can go is 1.138v and that's what I have it set to for benching. It runs 960mhz on the core with no artifacting or stuttering of any kind, but the mem was still set to stock. My vid unfortunately is worse (1.050v). I'm still thinking of just doing a full return because I'll be honest I was really bummed out when I saw the vid.
but you said all this vid thingy is just a myth :)
why be bummed out its not a bad vid its doing 960 thats good
just increase vgpu a bit more (set to 1.150 an itll drop to 1.149 after apply) via afterburner to get mem higher and your good :up:
Yeah i know its a myth. Just remember though i think we would all be as cheery as you if we had a chip as good as yours. Still though I can't complain, I'm very fortunate to even own such a card.
How do you unlock higher volts? I would like to give 1.150v a shot with 100% fan speed, still at 85% over here.
if it makes you feel any better nothing special about my chips they just 1.025vid thats all
look around lucky others got 1.000vid can only dream of 2x 1.000vid id be doing 1ghz on stockcooling thru all tests
but im happy and thankful with what i got
dude im still on stock bios you think someone offered or shared any special bios with me nothing
look for "afterburner 2.1 beta 4" easily attainable
I am using afterburner 2.1 beta 4Quote:
Originally Posted by NapalmV5
New 263.09 WHQL over at EVGA downloads to try :)
Heres shams unlocked/cold bios
http://www.madshrimps.be/upload/Massman/GTX580/c.rom
Also you can get your own bios modded here
http://forums.guru3d.com/showthread.php?t=329033
if you look at page 31 h made me a evga sc 580 bios with 100% fan and unlocked to 1.21v.
those guys are ok helping all who ask.
nice 03 action napalm :)
Thanx m8 on it now will do some benches in the next hour!Quote:
Originally Posted by bito
My max clocks any more and starts to freeze up! Will have to wait for higher clock till i get a chiller!
[IMG]http://www.hostimage.co.uk/image-D566_4CE80E7E.jpg[/IMG]
on 263.09 now so far pretty much the same performanceQuote:
Originally Posted by bito
thanx cowieQuote:
Originally Posted by cowie
ill give bios a try a bit later
thanx!
Same ere same performance with 263.09 drivers!
What do you guys think. Would a oc'd Q6600 be able to keep this card going?
It would but be very cpu limited!
:D 1.0vid @ 1.33v -180c
Nice! Results!
@Splave nice :toast:
Quote:
Originally Posted by Nazu
indeed even q9650@4.5ghz wasnt enough.. then again depends on the apps/settings usedQuote:
Originally Posted by bro20000
concentrated on getting the system stable and went up this high on ambient air/thermalright silver arrow/1.5vcpu
Q is will it be stable running the 580s @ high 3d clocks.. thats coming up
http://img44.imageshack.us/img44/8741/93262801.png
Nice result m8! Is that cpu on water now! Have been thinking of getting a 980x but sandy bridge is kind of putting me off!
thanx! no bro no changes still same cooler from above^ im not into watercooling dont have any cpu/gpu waterblocks
http://img9.imageshack.us/img9/8277/12780975.png
Nice overclock on air! I think i will get a 980x my cpu is letting me down! I can only get 4.3Ghz max! Had like 5GHz on water! When ocing the 580 there very cpu limited!
I bought an MSI 580GTX. It has a green pcb with a 1.03 VID but its not a good clocker. Stock VID with fan @ 85% can only do 900mhz 3D03 benchable...:(
Best I can do for now on air but the score seems low to me...thought I'd be much closer to 110K with these clocks.:confused:
http://img16.imageshack.us/img16/752...1121145015.png
Asus green and yellow pcb but 1.013v vid for both of them. Stockcooling 85% fan:
http://img545.imageshack.us/img545/5...agep463061.jpg
I'm intrested in gaming performance, not so much in Vantage or other benching programs.Quote:
Originally Posted by NapalmV5
look thru all of first post - i didnt remove q9650 resultsQuote:
Originally Posted by Nazu
in crysis 950mhz gpu single 580/aa 16xQ @ 980x beats 975mhz gpu single 580/aa 4x @ q9650
just an example like i said it depends on the game and settings
980x
http://img266.imageshack.us/img266/9809/53022104.png
q9650
http://img29.imageshack.us/img29/6775/34503351.png
thanx! yeah hawx2^ is a good example 5ghz 980x aint enough for sli 580 high clocksQuote:
Originally Posted by bro20000
sorry to hear.. what vgpu ? increase mem clock to 1100-1150 and youll get better score/sQuote:
Originally Posted by MTP04
very nice :up: keepers! :toast:Quote:
Originally Posted by pinto
Very nice Allen :up:Quote:
Originally Posted by Splave
Using stock vid of 1.03v for my runs for now. Even with increased mem clocks I am still puzzled on how some people are getting higher GT3/GT4 scores on similar clocks.Quote:
Originally Posted by NapalmV5
An improvement but still not what I expected....something is missing.:shakes:
http://img526.imageshack.us/img526/9...1121190611.png
it could be your system memory what clocks is that at and timing!
Doesn't look too bad. Would be nice to see those gaming benches done at cpu clocks people usually have (something like 3.2GHz-3-6GHz) Not all of us have watercooling.Quote:
Originally Posted by NapalmV5
Very nice , 1.0 VID on LN2 is very strongQuote:
Originally Posted by Splave
Some benchmark at 3.8Ghz
Default 580 Clocks
[IMG]http://www.hostimage.co.uk/thumb-EEA7_4CEA51FD.jpg[/IMG]
900C/4500M
[IMG]http://www.hostimage.co.uk/thumb-805F_4CEA51FD.jpg[/IMG]
985C/4500M
[IMG]http://www.hostimage.co.uk/thumb-48E4_4CEA51FD.jpg[/IMG]
580 card scale really well!
I don't think its memory, I have it at 900mhz with 7.6.5.15 1T. Maybe its just that i7 is stronger in those particular game tests than my setup.:shrug:Quote:
Originally Posted by bro20000
does this look like watercooling to you?? go poop on someone else if you got nothing better to doQuote:
Originally Posted by Nazu
http://img543.imageshack.us/img543/6779/77608708.jpg
Allen you need another 1.000vid and youll do a lot of damage :up:Quote:
Originally Posted by miahallen
thats low oh it needs higher vgpu than that v1.1xxQuote:
Originally Posted by MTP04
im not a 3dmark expert i just runem consecutively always
run it with nature selected only first and see you if get higher fps that way
runem all in certain order - check the 3d section
nonetheless you still need to increase vgpu/core/mem
note: windowed vs fullscreen: quite diff results - windowed = higher fps/scores
just pure insane tess @ 1080p
http://img217.imageshack.us/img217/4532/28155724.png
default normal settings
http://img440.imageshack.us/img440/536/76986644.png
Nice results!
thanx!
heres 64bit for comparison
http://img522.imageshack.us/img522/3261/16350764.png
http://img641.imageshack.us/img641/2465/86388965.png
oh man bit the bullet and got a third card huh? :D
any crysis and crysis warhead benches with 3x580 on max setting! Thats way cool!
sli :D i gave it a shot but this will go in the q9650/p45/ddr2 systemQuote:
Originally Posted by cowie
its not running very efficiently right now.. id need another 1.025vid this 3rd 580 is high vid and brings down the others with it.. and on top of that it probably needs more juiceQuote:
Originally Posted by bro20000
http://img33.imageshack.us/img33/1353/77699070.png
http://img194.imageshack.us/img194/9977/68338831.png
http://img148.imageshack.us/img148/5575/45201207.png
Napalm, TY for the Stalker test! I think I need to sell off my 465 GTX and a kidney (got two right?) and get a 580 or 2!!! :D
Here is a link for Metro 2033 demo :
http://www.fileplanet.com/215567/210...etro-2033-Demo
Can you run it at max settings (4xAA or higher) if you have time? Single and SLI would be nice.
Thank you again!
My GTX 580 resets the frequency during acceleration.
900 stable at 1.138v is water on the GPU.
How to disable the protection from the dumping frequency once and for all?
Temperature of 14 degrees with no load, the test as 54 degrees.
it in one test may like this
http://10pix.ru/img1/1350/2832492.th.jpg / http://10pix.ru/img1/1367/2832494.th.jpg
But in games, only 900 MHz.
Here is my 1.050V card.
PCI-E extender - Noctua Cooler - AMD bracket -silent fan =cool and quiet all the time :)
http://sf3d.pp.fi/images/GTX%20580/1.jpg
http://sf3d.pp.fi/images/GTX%20580/2.jpg
http://sf3d.pp.fi/images/GTX%20580/3.jpg
http://sf3d.pp.fi/images/GTX%20580/4.jpg
http://sf3d.pp.fi/images/GTX%20580/Load%20big%20fan.jpg
Game stable (24/7): 1.24V (3D load) 925/1100/1850
Benchmarks: 1.28v (3D load) 970/1100/1940
This card is not good.
Need to find better samples and then it is time for some more serious stuff.
My cold Water 580@1.075v 975 core
http://10pix.ru/img1/4714/2831679.th.jpg
Quote:
Originally Posted by SF3D
Weird seeing green pcb i thought there all black reference design!
It is black bro :) Only the slot extender is green :)
I'm... not comfortable in contradicting Peter by saying this, but I think 100 ohm trimmer is too big.
I hooked one up, and by the time I got to 1.10v (3D) there was 19.2 ohm left. If someone wanted 1.15v and got impatient, they're risking a short circuit :(
I now have two 100 ohm trimmers in parallel. Extra turns and a faster response as dual safety nets.
AMD bracket is applicable to GTX 580? :D
AMD Phenom bracket is perfect fit! :DQuote:
Originally Posted by vern
This is what 1.05V VId card can do on aircooling.
http://sf3d.pp.fi/images/GTX%20580/G...oled%20run.jpg
1.274v and only 61c max... cpu cooler @ gpu FTW :D
I got a 1.002v GTX580 and can't make it stable at only 925MHz with 1.12v. It's still aircooled, waiting on the waterblock, that's probably why it crashes the driver after a while playing. I don't wanna test with more volts before i watercool it.
My cold water only GPUQuote:
Originally Posted by Garrett
http://10pix.ru/img1/3823/2846274.th.jpg
http://10pix.ru/img1/3839/2846275.th.jpg
Air cooling 1GHz Core very nice:DQuote:
Originally Posted by SF3D
How cold are we talking?Quote:
Originally Posted by Alexxx650
Nice btw... 1GHz :up:
Water from the cold tap goes into my computerQuote:
Originally Posted by Garrett
http://10pix.ru/img1/782605/2851667.th.jpg
a place of connection.
Then the 10-meter hose and my computer
Thank you.
Yea, 1.2XY V nice, but watch this with 1.138V ;)
Messured while running EVGA OC Scanner.
http://www.abload.de/img/dsc06274xnxh.jpg
Lost.. spell it out please for those that are not awake yet! hehe
He's showing that with 1.2 volts, vregs measured temps are 107.2C! Would probably be much less with a full water block. Slipknot, you should strap some fans to that sucker!
water 107℃ :(Quote:
Originally Posted by Slipknot
So Crazy
5 heatpipes:DQuote:
Originally Posted by Gaul
Very strong
CORRECTQuote:
Originally Posted by vern
http://img28.imageshack.us/img28/3254/dsc01049e0.jpg
ON ACTION.................
soon.....
http://img835.imageshack.us/img835/4010/dsc01102h.jpg
Removed easily, but I have had problems after a long time was reset the frequency with which connected it is not clear.
It seems necessary to produce a second version of the program there are already 100% protection will be removed.
No overclocking just to play on the set only cooler by 60% and was reset frequencies in NFS HP after 40 min
Temperature no higher than 38 degrees.
I want to know the overclock temperature :DQuote:
Originally Posted by Gaul
990 Core only 1188mV , very strong:shocked:Quote:
Originally Posted by pinto
#1 GTX580 @ 1,1v 990MHz GPU 1100MHz Memory
@Stock Cooler.
http://www.abload.de/thumb/gtx580_1eiw3.jpg
1.1V on Stock Cooling can run 990Core:shocked:Quote:
Originally Posted by SuicidePhoenix
Very very strong
Your room temperature ?
Quote:
Originally Posted by SuicidePhoenix
WOW! What VID voltage u have on ur card?
freaking cold :D idle temps were about 28°C so i would say comparable with water/good air cooler
Tested 4 Cards yesterday, that was the best of them :-)
http://www.abload.de/img/gtx580_benching1y7d.jpg
Good Luck , 4way:DQuote:
Originally Posted by SuicidePhoenix
here default temp on FURMARKQuote:
Originally Posted by vern
http://img338.imageshack.us/img338/5806/full42.jpg
only 42℃Quote:
Originally Posted by Gaul
Very nice:D
Is that with the OverCurrentProtection disabled?
1Ghz with PEC: poor extreme cooling (open window), my friend Mandrak's tribute!
http://img821.imageshack.us/img821/3634/65775432.jpg
http://img836.imageshack.us/img836/4009/27616558.jpg
http://img811.imageshack.us/img811/8594/59810981.jpg
vid?:)Quote:
Originally Posted by pinto
1.013v both
So strongQuote:
Originally Posted by pinto
950/1150Quote:
Originally Posted by vern
http://img718.imageshack.us/img718/1003/fulloc.jpg
my card needs 1.1v for 875, is that bad? lol
Need help, just got my evga sc(ssc ftw) * 4 today and 4 of them just don't do anything on my UD9 (bios f5g) no bios post or anything happen only the fan 're spinning. But on my R3E all work. What should I do???? Please.......
vern you really should think about buying a full coverage water block, everything except your GPU are suffering! Don't expect a long lifespan from that card! :eek:
-Systemlord
Cooling is very strongQuote:
Originally Posted by Gaul
nice:D
Which brand water block are you using?Quote:
Originally Posted by vern
-Systemlord