Well, the Easy benchtables do, but this is a sketch for the "mini" benchtable discussed recently in this thread.Quote:
Originally Posted by lkiller123
Printable View
Well, the Easy benchtables do, but this is a sketch for the "mini" benchtable discussed recently in this thread.Quote:
Originally Posted by lkiller123
My new motherboard will be here tomorrow and it needs a home! Where are you with the next lot of tables dimas??
the materials arrived last week on manufacturing...it is just matter of one week or around, as told in the previus post...and begin of may, production time can be very variable on quantity needed, will updating thread once we're ready...thanks for your patience.Quote:
Originally Posted by TBahre
Thanks for the reply. I don't mean to be pushy, it's just so hard to wait for something so awesome.
i couldnt wait, i managed to pick up a second hand flawless DimasTech bench v2.0 for £90 :up: i am just waiting on some extra barbs and tubing before re locateing my rig onto it.
and even though its the v2.0 its still fantastic :yepp:
Hey Dimas do you play on supporting the SR-2, and also dual 480 rads? Thanks BTW LOVE your craftmenship :up:
Here you go :)Quote:
Originally Posted by Dimas
I'd be in on a mini version bench table as well, space saving is a must!Quote:
Originally Posted by Lunait
I don't think it would be wide enough to support it :confused:Quote:
Originally Posted by lkiller123
Hello actually, there's no booked Table for SR-2, it will goes on request we think, couse numbers are very low...so who is interested in getting some done, have to tell us, through PM here or via email/website.Quote:
Originally Posted by =[PULSAR]=
thanks for your compliments, a table like this will come very very huge, and don't know how many people have space enough to house a huge thing like this...
we got a Hard Table incoming for the SR-2, about the Easy one, as told..need numbers...
The Mini is almost ready, need to fix some little problem with bends, than i'll post renders,hopefully by end of this week.
Dual Side 3 fans radiator coming to painter this week;)
+1 for a SR-2 Easy, if you could do some renders for it I could post it over at the evga forums and generate interest. There are quite a few people over there would would like a case for the SR-2 but don't want to pay 400+ USD for a case. Also instead of the triple rad on the side you think it would be possible to do a quad on both sides?Quote:
Originally Posted by Dimas
Will there be retailers in the US? I've been to your website and I saw the shipping is a pain in the butt.Quote:
Originally Posted by Dimas
still working on, right now ship cost are not that high for Usa and Canada, we have a special rates for that 2 countrys, there is the USD/Euro change that affect a lot too, but i think with our first reseller entering there will be better prices, it's just a matter of waiting...Quote:
Originally Posted by lkiller123
Easy dual sided on delivery today...and also some good news about another project...that have something to do with Aluminium...ehehe...
I just got my Dimastech 2.5 bench in the mail this week and I absolutely love this thing! I was going to go with metallic black but the white bench looks amazing :) Can't wait to do some more work on this bench.
thanks for your feedback, looking forward to see some good benching;)Quote:
Originally Posted by Jshay
received and on painting, an SR-2 special edition bench Table, this table is just for demostration, it will be present at Computex;)
http://forum.nexthardware.com/galler...g1sr2table.jpg
http://forum.nexthardware.com/galler...g2sr2table.jpg
on the Study also a Bench Table with Hd/optical and psu for that beautiful motherboard, if there are enough people interested...
The MINI is coming very nice...still some last things to adjust, and will post some good pics..
Good to hear :)Quote:
Originally Posted by Dimas
Waiting for that photos and then I will decide which Benchtable cover my needs^^
where can i buy it??!!! :shocked:
http://forum.nexthardware.com/galler...1_DSC_0274.jpg
sorry guys for delay, very full period...some good news for the Bench Table Easy, that is receiving a new Piece, an SSD holder for 6 disks, it is possible to integrate it inside a HD support.
and also on the way, full series of radiator spacers, metal material and powder coating, of course customizable in color;)
PS forget to say, US/CANADA distribution is nearly to be done, so if everyone have some info to ask, customization, colors or some special custom work to have realized, now is possible also for US/CANADA countrys...timing around begin of Q3.
Dimas, when I first saw your benches/tables, I was amazed at the solid construction.Quote:
Originally Posted by Dimas
Maybe you will never send any tables to my Country, but can you let me know when and if ever, you will send a table or two to me here in Western Australia???
Unfortunately I live in the far end of the so-called civilized world. And getting any decent cases/benches is near impossible.
But would you at least consider receiving full-payment for one bench, to be sent here?
thanks for words...you have a pm...Quote:
Originally Posted by docwhom
Be carefull!! I recently got my new bench to find it had a big scratch on the top. Emailed DimasTech 3 days ago and still no reply. Not impressed :mad:
Hes been a really busy guy working on a couple new projects. Andrea is a good guy I'm sure he will get back to you.Quote:
Originally Posted by Nvidia Ireland
I agree, I had an excellent experience dealing with Dimas not long ago. Have patience.Quote:
Originally Posted by =[PULSAR]=
awesome, very unique!
hi dimas....can you please let me know if you ship to pakistan? im very much interested.
we did receive tons of email each day...sorry for delay, you will have your reply today, for find best way to solve this problem.Quote:
Originally Posted by Nvidia Ireland
we ship everywhere in the world, just ask for quote via pm, thanksQuote:
Originally Posted by xxh1tm4nxx
sorry all Guys, for the delayed Mini rendering...been working on huge project for other field than IT, it's sucking all the time...
Hi Dimas how is your Carbon table? Any progress?
carbon look, for now will be a custom work available, the total cost of operation is very high and we can't make them in series...if you're interested, use the PMs;)Quote:
Originally Posted by FirePhoenixCtk
Hey everyone, does anyone have pics of the dimas pump/resevoir holder part, http://www.dimastech.it/EN/c/pump-an...support-black/ , I see now how it holds the reservoir but not sure how it holds the pump? Does anyone have any pics of it in use? It also says only up to ek 250, but it seems like if you mounted the res at the bottom and at the top you might be able to hold a 400? Also has anyone got their case in one of the custom green colors/ have any pics of that.
Thanks!
I would be interested in a dual rad depending on how much it cost to ship to the US.
hello....you can see pic here of res...Quote:
Originally Posted by scottc19
http://www.pctunerup.com/up/image.ph...7_IMG_8668.jpg
you can use mcp from swiftech or a modded top laing dcc...
green: http://www.xtremesystems.org/forums/...0&postcount=44
got to get myself one of these, sick of changing parts all the time..
I finally ordered one ;)Quote:
Originally Posted by Johnny87au
Very Sexy benches, any chance these will be stocked in Australia ?
Thanks
Darren1981 - The reason I built my Ghetto techbench was because I had so much trouble trying to get one of these Dimastech benches (stock items became hidden extras ie: £10 more for the usb port and another £10 for the psu support, which are both in all the pics and reviews)!Quote:
Originally Posted by Darren1981
Anyway, neither 'extra' was in stock for a month. I even expanded my search to Germany and then the manufacturers site in Italy. But the cost of postage made it impossible. So, I built my own as you've seen. http://www.xtremesystems.org/forums/...57#post4463557
sorry to correct you, but in all reviews is mentioned that USB cable and FlexFan are extra accessories, we send together with review sample a letter explaining that thing about extras accessories, if the reviewer is not writing is not our responsability.Quote:
Originally Posted by LeighPing
on our website is also explained, and also explained on the part list that this part are accessories.
about the USB cable, it's 2,99€ and the PSU support is included in the bundle, so i suggest to check things before talk.
We try to make all people happy also with reducing our margin, we did ship more than 5-6 pieces to australia, the ship cost is over 130€ but for Us having our products in this Far Country is an honor.
thank you
I see your point and I think your product is a beautiful one. However, I'm pretty sure the psu support (not the fan support) is a stock item. Tell me if I'm wrong.
The other main issue is; When I find one for sale, they do not have these 'extras' in stock. I was quoted a month until they had them.
I would pay the 'mark up'. But waiting a month for stuff is the suck. Thanks for your reply.
some pics of my dimastech 2.5 ... a great, great product ! :)
http://www.mice86.fr/Dimastech%20full/IMG_3324.JPG
http://www.mice86.fr/Dimastech%20full/IMG_3325.JPG
http://www.mice86.fr/Dimastech%20full/IMG_3321.JPG
the PSU support is included in all the Easy V2.5 bundle, the extras can be the flexfan or maybe the USB cable, or other parts that in a normal setup are not necessary, like a pump+reservoir support or maybe ssd support (incoming:) )Quote:
Originally Posted by LeighPing
i don't know where you asked for, but if you have this kind of problem you can contact us directly...
thank you too for the explanation;)
very nice setup, love the integration of second Radiator with fan supports;)Quote:
Originally Posted by Mice86
we've now ready also a Dual Radiator 3 fans...
a new one ... i've change the fix for the EK radiator !
http://www.mice86.fr/dimastech%20fin...n/IMG_3756.JPG
http://www.mice86.fr/dimastech%20fin...n/IMG_3758.JPG
:D
new ssd support for up to 6 disk, it can fit in the normal Hard Disk support, and let be free just one HD 3,5" position.
some pics of the first sample...
http://forum.nexthardware.com/galler...1_DSC_0720.jpg
http://forum.nexthardware.com/galler...1_DSC_0723.jpg
http://forum.nexthardware.com/galler...1_DSC_0722.jpg
http://forum.nexthardware.com/galler...717_resize.jpg
coming soon the final revision
How much for one in Australian dollars dimas? including shipping..
..working on my setup :)
http://www.abload.de/img/img_6709748p.jpg
http://www.abload.de/img/img_671070jz.jpg
http://www.abload.de/img/img_6832a0mi.jpg
http://www.abload.de/img/img_6851n2el.jpg
http://www.abload.de/img/img_6848lh6f.jpg
@Dimas: finally my cpu is back from rma, so i can start firing it up now :)
you have pm;)Quote:
Originally Posted by Johnny87au
good setup Bundy...i'll be waiting to see it completed;)
And pm back :up:Quote:
Originally Posted by Dimas
Realy nice Bundy:up:
Have ordered one myself now.
Big :clap: for the service from Dimas.
Bundy what are those fittings lol, look huge and bulky almost like big nuts
Very nice bundy!!
Thanks guys ! Those are Jingway and Enzotech Adapters and the Fittings comes from XSPC. Here are the links:
http://www.jingway.com.tw/en/products_connector.html
http://www.enzotechnology.com/water_cooling.htm
http://www.watercoolingshop.co.uk/G1...arb_AQF5I.aspx
http://www.abload.de/img/img_5170mrlv.jpg
Thanks mate, How heavy are these bad boys haha ;)Quote:
Originally Posted by bundymania
hmm, realy liked those adapt. and fittings:D
Will watercool most of the hardware on my bench and nice tubing is importent:)
Loving those Jingway adapters :up:
Just posted our review here.
http://article-images.clunk.org.uk/a...s/IMG_0967.jpg
thanks Clunk for sharing...;)
down here..a italian guy making the Yellow...very special..
http://forum.nexthardware.com/moddin...finirsi-2.html
http://img193.imageshack.us/img193/2444/dscf0527r.jpg
Hehe, Flower Power Hippie 70´s style :D Nice idea and good for outside benching in the summertime :)
looks nice Dimas :D
any sketches of the mini ?
I'm trying to work out what version of table I have here.
It has 24.5mm fan spacing for the radiator, the HDD cage can fit on the far right, and the buttons are the style with 11mm cutouts.
I love the SSD adaptor, too, Dimas. :up:
Is there a US/Canada distributor for DimasTech?
i think it's a V2.0 for thermochill radiators (old STyle);)Quote:
Originally Posted by Jacka
the solution about distribution will be solved before end of year, for now you can take directly from ITALY, we've good agreement with major ship company...Quote:
Originally Posted by DexNfX
i did begin the work, but have some trouble working on it..i've all free August...:DQuote:
Originally Posted by FatAlbert
Should be hard to compete with Bundy, but i will try my best:P
Im wating for EK 4-way block and EK Supreme HF nickel\acetal, and some black compression-fittings to my black tygon.
But i have to say it again the service and support to Dimas is one of the best i have experienced:D
Bundy: Im amanita muscaria on hardware.no, keep up the great work:)
If you have reviews and thing like that, just put links here http://www.diskusjon.no/index.php?sh...#entry16052604
that is the hardcore watercool-part of the forum.
BTW: Here i have some detailed photos :)
http://www.abload.de/img/img_7333twlz.jpg
http://www.abload.de/img/img_7337nkqc.jpg
http://www.abload.de/img/img_7334gvtj.jpg
http://www.abload.de/img/img_73478j7a.jpg
http://www.abload.de/img/img_7341pmhx.jpg
PS: I´m already active in that norwegian forum - some of my reviews are online there, it´s a nice place :)
http://www.abload.de/img/img_735007lq.jpg
good going Andreas, hope i can send adding parts by next week, so you can finish the work bench station;)
Yeah, that would be nice :)
I need me one of these the way i am changing parts and plus for my watercooling it would be perfect.
That's a nice clean build you did BundyMania.
My DimasTech Bench Tables V2.5 build was not as clean as yours.
However I want to tell you all that I ordered one of these from Andrea @ Dimas last week.
It shipped from Italy on Thursday and was here in Chicago and delivered to me on Monday.
Over the last day I been tinkering with the build and finally slapped it all together to check out the i7 950 that was just dropped off by Fed Ex.
http://a.imageshack.us/img72/9552/i7950.jpg
I would like to thank Andrea for getting this order shipped out very quickly.
The packaging of the product inside the box is well protected by styrofoam and all arrived fine after 4,000 miles.
Unpacking the items from the box and examining the components you can see and feel the quality that these Bench Tables have.
The metal case is thick and quite sturdy and all the accessories have the same characteristics.
Anyone looking at a Bench Table should consider one of these.
Here are some pics:
http://a.imageshack.us/img710/4761/dimasbox.jpg
http://a.imageshack.us/img14/7776/wellpackaged.jpg
http://a.imageshack.us/img28/6839/settingitupno1.jpg
http://a.imageshack.us/img255/2086/settingitupno2.jpg
http://a.imageshack.us/img844/1332/dimasinstallno1.jpg
http://a.imageshack.us/img176/2879/d...stalledno2.jpg
Quote:
Originally Posted by Mice86
What are you using to hold up your EK radiator and where did you get it?
I am not trying to spoil the party, but I think this thread should be moved to the DIMASTECH Support section.
this is not a support thread, it just a place where to show improvements and get suggestions from community...
of course all next introduction of new product will be going on the support section;)
for the EK radiators, i'm using 2 parts of the 120mm fan support from dimastech ...Quote:
Originally Posted by DexNfX
Mini Table will be ready soon, as always...for any suggestion of improvements, or just a "i think you have to add something like this"....
1x White Mini Table for me pls :) Pics ?
new screws for table...check here for pics...
Mini have been delayed...but for january/feb will be ready...
Good to hear that you're working on it :) Is it still going to look like this btw?Quote:
Originally Posted by Dimas
http://i43.tinypic.com/a1dw8.jpg http://i39.tinypic.com/1zlqccy.jpg
yes...but with some improvement...merry xmas to all guys;)Quote:
Originally Posted by Lunait
Hey again, it's been a while. How is the work progressing? :)
is there a place in the states to order the flexfan92? i really want want one but dont want to pay 20€ shipping for 10.00€ part lol..
you have PM...Quote:
Originally Posted by NKrader
dimas havent herd from you ?
mate, you're very anxius man, take the life minute by minute, not second by second...sample will be shipped as soon as possible...Quote:
Originally Posted by Johnny87au
wekk at the moment very anxious so busy with university :)
I could definitely use that PM too... Thanks in advance.Quote:
Originally Posted by Dimas
my turn....how much to ship one of these to california? and how long would it take to get?
tat would be the easy hard v2
I have two of these and it took around eight or nine days from time of order to Tennessee if that helps. Worth the wait for sure...;)
http://i434.photobucket.com/albums/q...DSC00777-1.jpg
http://i434.photobucket.com/albums/q...DSC00776-1.jpg
Hello, you can wait for a bit, frozenCPU will be stocking very soon...in all color versions and in all models available.Quote:
Originally Posted by johnksss
How do you like the Boreas TEC unit I bolted to the side of the bench station Dimas? :D
it looks like a porsche, with engine over the back axle...ehhe...Quote:
Originally Posted by rickss69
looks real nice rick!
dimas:
i can wait...any ideas how long though?
i think it's a matter of 2-3 weeks...so be patient for a bit more...there will be also full availability of Accessories, like dust covers and ssds supports;)
..waitin´ for my new Benchtable, let me know when it´s ready Andrea :) Thx
flexi fans mount with screw. m3 threads?
Hi Dimas,
Is this Bench/Test Table EasyHard V2.5 Milk White available? I'd like to get one. :)