800D Blood+　Project

and may you tell me will it be possible to put two 3x120 rads on bottom with16cm psu?

Love this project, totally inspiring to me! Question, would a 140.3 fit inside the case across the top? I'm debating a single loop w/a 140.3 and a 120.1 for an i7 920 and 2x GF100's.

mlee49: I've seen few worklogs with 140.3 on top. Sorry, i'm too lazy to search urls for them. Main thing you should watch for if 140.3 rad's width fits between 5.25 enclosure bays walls. Some 140rads fits (don't remember, XSPC or TFC or something else), some (in particular wider Black Ice GTX/SR1 - do not = required some cutting of top of those 5.25 walls). And of course you need cut top for larger rad and paint cuts or slap some nice rad grill ontop.

Quote:

---

Originally Posted by rioja

and may you tell me will it be possible to put two 3x120 rads on bottom with16cm psu?

---

have this case and think about it right now so theres 1cm gap only (with RX360 and OCZ PSU)and in this place bunch of wires ATX24 connector. If you can mod your psu - (turn this bunch on 90degrees) I think it possible.

noeru you have this PSU what do you think is it possible put here RX360?

http://www.overclock3d.net/gfx/artic...155701257l.jpg
http://www.overclock3d.net/gfx/artic...155703682l.jpg


also for two rads at bottom you'll need this side panel
https://shop.corsair.com/store/item_...spx?id=1171683

Nice build and photo's. But I think the one color light would look better.

Quote:

---

Originally Posted by 00011011

Noeru, great work! you have greatly inspired me on my first water cooled system. I am also using the i7-980x. Obviously the lower the better, but in your opinion (or anyone who could ring in on this) what would you consider the highest core temps you would feel safe for a 24/7 overclock (assuming stable)?
Currently I'm @ 4.3 GHz. I haven't run any overnight tests yet, but after 10 minute small FFT torture tests, my hottest single core temp maxed at 77 at some point, but running average of all six is 72.

And when running Prime95 torture test, which is it best to run? Small FFTs (ram not tested much), In-place large FFTs (max heat, some ram tested), or Blend (lots of ram tested)?

---

Hi 00011011
980X I tried two, we needed first 4.3G Vcore1.65V:shakes:
I tested the CPU and heat test operator prim95 I think highly reliable utility.
1core will not even when I make an error. And one 12-hour loop
Required.;)

Quote:

---

Originally Posted by Gonzalo-Gonads

Now get it crunching! :cord:

No but really amazing job! :up: I think a 480 rad will be pushing it alittle eh?

P.S. get it crunching ;) that thing would be a beast at wcg :yepp:

---

Thanks Gonzalo-Gonads
Large individual differences in the CPU! It is too many bad yield Bath #

Quote:

---

Originally Posted by The.Sorrow

HI

Amazing project dude.

Can u just tell me , is that a conector witch are in the midle of the 1 gt295 and the second, or is a junction of males and females conector?
if its a conector can u just give me the exact name?

I love it,, the look man..

Congratzz :up:

---

Hello The.Sorrow:)
Bitospawer GT295 combines the connection of the joint:up:
Attachment 103773
http://www.performance-pcs.com/catal...ducts_id=24677
http://www.performance-pcs.com/catal...ducts_id=23697

Quote:

---

Originally Posted by rioja

and may you tell me will it be possible to put two 3x120 rads on bottom with16cm psu?

---

Hello rioja:)
What unit two loops? Not that my 120x3
One of the right panel, the second left panel, attach the three intermediate panel.
However, air flow is difficult.:confused:
the top exhaust:yepp:

Quote:

---

Originally Posted by mlee49

Love this project, totally inspiring to me! Question, would a 140.3 fit inside the case across the top? I'm debating a single loop w/a 140.3 and a 120.1 for an i7 920 and 2x GF100's.

---

Hello mlee49
Thanks to word of praise!:)
It is a difficult debate! I see skinnee test.
XSPC rad I like the pitch. Slow (800-1000rpm) of the cooling fan is working I prefer quiet.
For the GTX480, HWLabs SR1-480, XSPC-RX480 candidates cited a quietly cool for me to determine the size needed GTX 480 has a narrow pitch fan speed 1800rpm ↑　SR-1 is a low volume.We have to xspc480.I think I prefer a quiet 140.3.:rolleyes:

Quote:

---

Originally Posted by churchy

mlee49: I've seen few worklogs with 140.3 on top. Sorry, i'm too lazy to seerch urls for them. Main thing you should watch for if 140.3 rad's width fits between 5.25 enclosure bays walls. Some 140rads fits (don't remember, XSPC or TFC or something else), some (in particular wider Black Ice GTX/SR1 - do not = requiered some cutting of top of those 5.25 walls). And of course you need cut top for larger rad and paint cuts or slap some nice rad grill ontop.

---

Quote:

---

Originally Posted by Nage

have this case and think about it right now so theres 1cm gap only (with RX360 and OCZ PSU)and in this place bunch of wires ATX24 connector. If you can mod your psu - (turn this bunch on 90degrees) I think it possible.

noeru you have this PSU what do you think is it possible put here RX360?

http://www.overclock3d.net/gfx/artic...155701257l.jpg
http://www.overclock3d.net/gfx/artic...155703682l.jpg


also for two rads at bottom you'll need this side panel
https://shop.corsair.com/store/item_...spx?id=1171683

---

Hello Nage
I tried to put a 360 in the first study.
But I abandoned the ocz-z-z1000PSU
360 if possible get things set up next to the wiring is possible.
But now my system is 1000W but I have trouble in getting enough.
It will create a new side panels and me.

Quote:

---

Originally Posted by Awers

Nice build and photo's. But I think the one color light would look better.

---

Hello Awers
Thank you　Yes! Certainly:D

Quote:

---

Originally Posted by zigzag

Hi Noeru! The length and width of your 480 cut out?? I have the same rad aswell, xspc 480. Was hoping to get a head start on the cuts before my bitspower grill arrives :)

---

Quote:

---

Originally Posted by avddreamr

You could do that, and it may even be easier to use one of the new antec psu that are 120mm high, and place the fan their. It would greatly simplify cooling.
Although, I dont think they go up 1000w, but you may not actually need 1000w.

Another idea, is to use one or two rx360 instead. I think you have 572mm on the base to play with. The rx360 is 410mm, so that leaves 172mm to play with. It would still force you to get creative with psu mounting. You could either get a short psu and get very very creative, or fab a psu extender.
Or you could fab up a new psu case to work with that small ammount of space, just depends how comfortable you are with cracking open your psu.

Either way you have your work cut out for you. It's funny, no matter how big a case gets, you always can think of ways of where you just wish it was just a bit bigger.




Amazing build. btw

---

Quote:

---

Originally Posted by ScottALot

Take some pix of your dachsund! He's so damn cute.

---

Thanks ScottALot　She is so very cute:p:

amazing build ... I picked up few things and replicating it in my current project LINK

I'm struggling to fit the XSPC Dual bay res in the 5.25" as the sliders are sticking too much and prevent me from putting it in. I might have to dremel them off.

Quote:

---

Originally Posted by Omarko

amazing build ... I picked up few things and replicating it in my current project LINK

I'm struggling to fit the XSPC Dual bay res in the 5.25" as the sliders are sticking too much and prevent me from putting it in. I might have to dremel them off.

---

Great job!
XSPC Dual Bay has resonance.
DDC3.25 I think it is best to fix a pump panel;)

Quote:

---

Originally Posted by 00011011

Obviously the lower the better, but in your opinion (or can anyone else answer this?) what would you consider the highest core temps you would feel safe for a 24/7 overclock (assuming stable)?

Currently I'm @ 4.3 GHz. I haven't run any overnight tests yet, but after 10 minute small FFT torture tests, my hottest single core temp maxed at 77 at some point, but running average of all six is 72.

---

I appreciate your response noeru, but you didn't answer my question; perhaps you didn't understand me. Hopefully this Google translation works properly :)

明らかに良い、低いがあなたの意見（または他の誰これを答えることができる？）どのようなあなたが安全な2 4 / 7オーバークロック（安定仮定を感じると、最高のコアタンを検討する）？

現在、私は@ 4.3 GHzのです。私はまだすべての夜間テストを実行していない10分小さなFFTの後、私の一番ホットなシン グルコアの温度を77でいくつかの点で大変疲れてテストを拷問が、平均全6を実行して72です 。

Quote:

---

Originally Posted by 00011011

I appreciate your response noeru, but you didn't answer my question; perhaps you didn't understand me. Hopefully this Google translation works properly :)

明らかに良い、低いがあなたの意見（または他の誰これを答えることができる？）どのようなあなたが安全な2 4 / 7オーバークロック（安定仮定を感じると、最高のコアタンを検討する）？

現在、私は@ 4.3 GHzのです。私はまだすべての夜間テストを実行していない10分小さなFFTの後、私の一番ホットなシン グルコアの温度を77でいくつかの点で大変疲れてテストを拷問が、平均全6を実行して72です 。

---

00011011
sorry　Google's translation :p:
Overclocking 24 / 7　try Prim95 4.5G 12hr 1roop roomtemp is 22.5
maxcore temp core1 69 core2 71 core3 63 core4 66 core5 69 core6 68
C1E off HT on 144.7x31 Vcore1.400v QPIVTT 1.350v NB 1.42 DRAM 1.63+

Attachment 103922
I tried 4 Gulftown results
Gulftown is very large individual differences.
4.3G but passes Vcore1.65v batch # There were no:shrug:
http://noeru-dairu.jugem.jp/?page=1

next VGA is :rolleyes:

Attachment 103923

I get worried about the next VGA:confused:
GTX480 2GPS　VS　HD5970 4GPU

Definitely the 5970s.

Quote:

---

Originally Posted by ScottALot

Definitely the 5970s.

---

+1 :up:

Quote:

---

Originally Posted by ScottALot

Definitely the 5970s.

---

Quote:

---

Originally Posted by Saltire

+1 :up:

---

ScottALot、Saltire　　Thank you
GTX480 is 438w:eek: HD5970 is 399w:clap: GTX295 is 418w
SLI and CF really does make a difference seems

I wonder if you can get these: http://www.newegg.com/Product/Produc...-460-_-Product

Cant believe this one slipped by me for so long. I just spent the last hour reviewing this thread. Absolutely awesome. Good work, noeru.:up:

Is it just me, or is the nickel coming off of the Mips Ramfreezer in post 211? :eek:

Can somebody please tell me what this tool is?

http://www.xtremesystems.org/forums/...1&d=1258769951

I'm about to drill out the front rivets but didn't see this additional tool that's needed inside the bay.

Quote:

---

Originally Posted by Danger30Q

Can somebody please tell me what this tool is?

http://www.xtremesystems.org/forums/...1&d=1258769951

I'm about to drill out the front rivets but didn't see this additional tool that's needed inside the bay.

---

That's a Black & Decker RTX flexi shaft.

http://www.blackanddecker.com/Produc...ProductID=2709

Phil

Thank you much Phil!

Great work so far Noeru. Your build is the inspiration for my future 800D build which will look very similar to yours except I have only (1) 240 radiator on the bottom and (1) 360 radiator hanging off the back of the case.

Quote:

---

Originally Posted by Danger30Q

Thank you much Phil!

Great work so far Noeru. Your build is the inspiration for my future 800D build which will look very similar to yours except I have only (1) 240 radiator on the bottom and (1) 360 radiator hanging off the back of the case.

---

Attachment 104175

Hello Danger30Q
It is as you say Philwong:)

hello and thanks　Philwong　:up:

Attachment 104177

GTX480 vote has been also extended
Which do GTX480SLI vs 5970CFX Haisukoa?
I want to order 480 or 5970 Waterblock soon:(
The performance-pcs

Thank you for those additional pics noeru.

thanks All. I will try to hd5970. i like 4GPU:p:

Attachment 104376

Attachment 104377

Attachment 104378

Beautiful graphics cards and beautiful project! :up:

Quote:

---

Originally Posted by V0id

Beautiful graphics cards and beautiful project! :up:

---

hello V0id :) very tanks!
I choose two cards from this 5970:up:

Attachment 104414


Attachment 104415


Attachment 104416


Attachment 104417

What's the BLACK EDITION for? (You can't have all three running in the same rig!)

Quote:

---

Originally Posted by ScottALot

What's the BLACK EDITION for? (You can't have all three running in the same rig!)

---

hello ScottALot:)

Yes, can not be 6GPU
I know the difference between them is VGA:)
I select two pieces from here

And I get the third one, right?

Very nice build! :up:

Quote:

---

Originally Posted by ScottALot

And I get the third one, right?

---

The VGA is Air cooled in this Sapp5970> Sapp5970OC> XFX5970
All 1125mV 800/1203

Attachment 104472

3DMark06 and Vantage score is.:shrug:

Quote:

---

Originally Posted by erikmorgan

Very nice build! :up:

---

hi erikmorgan very thank :)

Summer soon:rolleyes:

Attachment 104473

Quote:

---

Originally Posted by ScottALot

And I get the third one, right?

---

No. I mean, you're going to give me the 5970 that you don't use haha :D

EK-FC5970 - AMD/ATI Radeon HD 5970 Series Reference Design - Nickel

Attachment 104569

Attachment 104570

Attachment 104571

Attachment 104575

Attachment 104576

Hello Noeru,

With so much power you swore to blow up the rivets of the Obsidian. I have not yet seen an Obsidian climbing on trees, but I believe that on your worklog it is only a question of patience.
I am going to really enjoy the show two 5970 in this case.
Small caress to Airu. I understand that she wants to lower the head! I am a little bit like that also!

Quote:

---

Originally Posted by manu_D

Hello Noeru,

With so much power you swore to blow up the rivets of the Obsidian. I have not yet seen an Obsidian climbing on trees, but I believe that on your worklog it is only a question of patience.
I am going to really enjoy the show two 5970 in this case.
Small caress to Airu. I understand that she wants to lower the head! I am a little bit like that also!

---

Hello manu_D
Thanks, we look forward to your project.:up:
The Kanihendakkusu is Airu:)

EK-FC5970-Nickel+Blood+


Attachment 104638

Attachment 104639

Great looking project. :up: Looking forward to seeing it completed with all your new gear installed. :yepp:
That 5970 Gpu block looks great with the blood red coolant. :)

Quote:

---

Originally Posted by Red-5

Great looking project. :up: Looking forward to seeing it completed with all your new gear installed. :yepp:
That 5970 Gpu block looks great with the blood red coolant. :)

---

hi Red-5 Thanks:)

more pic:)

Attachment 104667


Attachment 104668


Attachment 104669


Attachment 104670


Attachment 104671

wow, that's a huge GPU power :up: :up:
nice blocks too

:up: Looking good!

Great project, these blocks with red coolant look really hot :D

Hi Noeru,

EK waterblocks 5970 is really beautiful mechanical parts. With the red liquid cooling the look is magic!

The internal volume of the Obsidian is planned for mother boards in the eATX size, it is thus spacious. The volume needs to be occupied by big GPU cards, so that the case is emphasized.
We say about a car that it is beautiful, when besides the body it also has a beautiful engine (a powerful engine). So when the internal volume of Obsidian (the body) is occupied by big cards, and when they are powerful (the engine), we cannot make better! Aesthetics and power are combined.

What I find it's a pity, it is only in the position ATX inverted that we see waterblocks upward. In the position ATX the aesthetic charm is hidden in a way. It's HARD!

I have already seen in France dogs of the race of Hairu. Thus I knew it was a race, but I did not know the name. "CROUCH, CROUCH" to miss Hairu, sweet little face.

Beautiful blocks.

Quote:

---

Originally Posted by aka_GK

wow, that's a huge GPU power :up: :up:
nice blocks too

---

Quote:

---

Originally Posted by shazza

:up: Looking good!

---

Quote:

---

Originally Posted by luke997

Great project, these blocks with red coolant look really hot :D

---

Quote:

---

Originally Posted by manu_D

Hi Noeru,

EK waterblocks 5970 is really beautiful mechanical parts. With the red liquid cooling the look is magic!

The internal volume of the Obsidian is planned for mother boards in the eATX size, it is thus spacious. The volume needs to be occupied by big GPU cards, so that the case is emphasized.
We say about a car that it is beautiful, when besides the body it also has a beautiful engine (a powerful engine). So when the internal volume of Obsidian (the body) is occupied by big cards, and when they are powerful (the engine), we cannot make better! Aesthetics and power are combined.

What I find it's a pity, it is only in the position ATX inverted that we see waterblocks upward. In the position ATX the aesthetic charm is hidden in a way. It's HARD!

I have already seen in France dogs of the race of Hairu. Thus I knew it was a race, but I did not know the name. "CROUCH, CROUCH" to miss Hairu, sweet little face.

---

Quote:

---

Originally Posted by Liderc

Beautiful blocks.

---

I am very happy thank you All:)

Attachment 104885

Attachment 104886




Hi manu_D
The work is very difficult:(. But consider the alternative;)

EK-FC5970 RAM Backplate - Nickel-Plate

Attachment 104881

EK-FC5970 - AMD/ATI Radeon HD 5970 Series Reference Design - Nickel

Attachment 104884



Stop Work;)　I'm noeru

Attachment 104882

That's adorable.

hilarious how big that 5970 is , even makes a dog look small.. lol

Hi Noeru

I did not say to you anything. I also possess Corsair 800D (that I like). Your remark is very sensible! :)
Things are so made, we cannot always gather all the advantages. He arrives however, that pass right by the perfection without obtaining him...it is sometimes contrary! Especially when we spent many efforts to reach there.

Noeru, I want to make you thanks. I followed your worklog since the beginning, and I have very minutely and for a long time studied the photos which you made of Obsidian. And it is with your help, thanks to you, that I discovered how the case was consu...and I bought it. :up:
I continue to follow all your updates. In particular the improvement consisting in modifying the position of the power supply to install one radiator 120.4 interests me a lot. It is as well the modification as I thought of making.

Very attractive photo of Airu :p:

A dog and a high performance GPU together ... you're in my version of heaven haha!

A small correction : When I wrote "I did not say to you anything", I thought of saying "I did not say everything to you, tell you all my story"!
Before any thing, it is my English which needs perfection! :down: :rofl:

Thank you　all:)
Sorry for my bad English:p:
Attachment 105115


Attachment 105116


Attachment 105117


Attachment 105118


Attachment 105119

Attachment 105120

Attachment 105121

Attachment 105122

Set woterBlock

Attachment 105188

Attachment 105189

Attachment 105190

Attachment 105191

Attachment 105192

Attachment 105193


Attachment 105194


Attachment 105195


Attachment 105196


Attachment 105197

EK made me drool with these blingy backplates, really love them :D
sick hardware noeru, will get the same cut in a half and in other color soon :rolleyes:

Quote:

---

Originally Posted by aka_GK

EK made me drool with these blingy backplates, really love them :D
sick hardware noeru, will get the same cut in a half and in other color soon :rolleyes:

---

Hi aka_GK :)
Like you said:p:


Attachment 105241


Attachment 105242


Attachment 105243


Attachment 105244


Attachment 105245

Hi Noeru

Beautiful body, and impressive mechanics. Thank you for photos.
Bravo! :up:

the cards come out very nice and the fluid looks good, but the tubes .. will you change these ones? Because they let the nice red glue pink and a little bit misty

Love the colour of the fluid. Suits the build very well!

Hey neoru which is the measurement between bottom & zone division plate (where you have the the XSPC 220 rad)? Could a SR-1 rad could fit standing down there (5.2")?

Quote:

---

Originally Posted by manu_D

Hi Noeru

Beautiful body, and impressive mechanics. Thank you for photos.
Bravo! :up:

---

hi manu_D
Thank you happy:)

Quote:

---

Originally Posted by ipuoL

the cards come out very nice and the fluid looks good, but the tubes .. will you change these ones? Because they let the nice red glue pink and a little bit misty

---

hello　ipuoL　

LED lights for the front, I see a strong pink:shrug:

Quote:

---

Originally Posted by imersa

Love the colour of the fluid. Suits the build very well!

---

very very thanks:) BooldyRED is TFC F-1 RED+Purple+Blue　mix

Quote:

---

Originally Posted by Blacky

Hey neoru which is the measurement between bottom & zone division plate (where you have the the XSPC 220 rad)? Could a SR-1 rad could fit standing down there (5.2")?

---

Hello　Blacky:)
XSPC　RX the width 125m / m, HWLabs SR-1 is 153m / m process without entering so is.
Besides I XSPC HWLabs GTX · GTS · SR-1 I did not tried all
The height of the base about 128m / m is.:(

153mm wide SR1 is one for 140mm fans. SR1 for 120mm fans is 133mm wide (but probably too wide anyway).

Quote:

---

Originally Posted by churchy

153mm wide SR1 is one for 140mm fans. SR1 for 120mm fans is 133mm wide (but probably too wide anyway).

---

hi churchy
yes this rad 12cm fan:)
Sheraudo structure for the side that is, I have a large margin

https://www.coolinglab.co.jp/index.p...roducts_id=576

I am the MIPS RAM Cooler 6 'Corsair Edition' I make friends with the head of the acrylic.
http://www.mips-computer.de/
CAD for that:up:

Attachment 105415

Attachment 105416

Quote:

---

Originally Posted by noeru

Hello　Blacky:)
XSPC　RX the width 125m / m, HWLabs SR-1 is 153m / m process without entering so is.
Besides I XSPC HWLabs GTX · GTS · SR-1 I did not tried all
The height of the base about 128m / m is.:(

---

Oh! so the SR-1 won't fit Orz

I guess I'm going with XSPC since MCR220 won't fit either (128m) would be kinda risky!

Thanks Noeru /bow :)

Been following lots of 800D builds as my friend is doing the same.
This has to be one of the best i've seen! Love the work mate!

Quote:

---

Originally Posted by imersa

Been following lots of 800D builds as my friend is doing the same.
This has to be one of the best i've seen! Love the work mate!

---

Hello imersa :)
Thank you　I get that nice little reference, we will promote the:)

Hey Noeru do you have a photo of the zone division plate alone?

Quote:

---

Originally Posted by Blacky

Hey Noeru do you have a photo of the zone division plate alone?

---

Hi Blacky Sorry for the late:)

Version of the picture looked a partition, but it was no:(

Attachment 105541

Thanks noeru :)

great build :)

The colours look perfect to me!

beautiful Nice job!

Quote:

---

Originally Posted by Blacky

Thanks noeru :)

---

Hi　Blacky 　
The few pictures I'm sorry　:(

Quote:

---

Originally Posted by disruptfam

great build :)

---

Hello　disruptfam　:)
veryvery　tanks:)

Quote:

---

Originally Posted by LeandroJVarini

The colours look perfect to me!

beautiful Nice job!

---

hello LeandroJVarini:)
I am glad you are honored:p:

Noeru

looks great. I want to make some changes to my 800D now.

How much weight your 800D? My not so equipped, but raise it hard enough.

nice job

hey, great computer build. i have the 700D which is very similar and am wondering how did you modify the side panel where all the cables are to improve airflow from there? thank noeru.

Hey, noeru , everything ok ? No answer to my pm , if you were ok after the EQ in JP, so i thought i'd bump this thread...

Hope everything is fine and your build works solid up to now...

Quote:

---

Originally Posted by felix_w

Hey, noeru , everything ok ? No answer to my pm , if you were ok after the EQ in JP, so i thought i'd bump this thread...

Hope everything is fine and your build works solid up to now...

---

hi felix_w

Excuse the delay in reply.

I have everything you Makasemasu.:)
Thanks

Thanks for the encouragement of many
Japan is fine:up: