wel as long as this board can take me up to 4ghz on wc i'm glad :D
Printable View
wel as long as this board can take me up to 4ghz on wc i'm glad :D
Mod bios installed and all is ok. RH very quick with mod, thanks guys. My 6400 runs very good on this board. I do need some heatsinks for voltage regulators on this board they get very hot when i push it and may be limiting my oc. Who sells good heatsinks for these small power chips
Yes the A09.RXX works well! I cut some larger heatsinks up so that they fit the power chips. Glued them on with thermal epoxy. What is your user name at RHCF? Of did you not join?
Board has arrived :D
edit*
runs smooth on boxed cooling :) 3.4ghz with ease ^^
No, it doesn't help the OC. Just gives the power fets some lower temps.
guys were can i change cas latency? :confused:
Try updating the BIOS first ;)
update bios if not already and use memset
updating bios was not really a good idea :) i had to reflash teh stock bios.
memset can't apply cas 4.
N56BAB01.BST is on the Tiawan site and I understand from the Admin of Rebels Haven that a mod adding the 5 new memory settings will be posted in a few hours.
Doesn't matter anymore. Board refuses the work.
I shouldn't have flashed that bios 612 :shakes:
Anyone else try the new Rebels Haven N56BAA09.RXX Mod BIOS? My best so far has been the mod 612. Lets me reach 315 HTT, and it's the only one that has let me run stable with the settings in my sig. I've tried all the others, modded and stock, to no avail.
Quote:
Biostar TF560 A2+ / 4000+ AM2 Brisbane / 150GB Raptor / OCZ 520w Powerstream
287HTT @ 9.5 x OC'ed to ~ 2727 @ 1.44v - load temp @ 38C
Crucial Ballistix 2GB (2 x 1GB) DDR2 6400 @ 1090 MHz / 5 - 5 - 5 - 18 -26 - 2T @ 2.2v
ATI x1950 Pro / Case: CM 690
Logitech Z-640 5.1 w/ Onboard Audio / Westy 22in Widescreen
Everything you need to know about Power Supplies____Heatware
gOdM@n: I just carry my Dell Vostro into the bathroom, but before I bought my Vostro, I thought about how cool it would be to have a desktop on there. Toilet gaming is probably the most comfortable seat you can ask for. I'd probably end up being asked to come into competition, but I don't think they'd provide a toilet for me there.
what's the max HTT on that Biostar?
My board works again lol :)
Latest modded bios on that rebel site.
Funny thing is, it refused to work with 2800+ sempron / 6000+ and my two setts of ddr2, now it works with my sempron 2800+ and dual channel works again :)
strange board, i have a felling that i will not be able to get the WR with this board.
edit*
must rethink that lol, works flawlesly now.
This is boxed cooled at 1.6V vcore and 2.2V vdimm chipset at 1.300V :D
The Admin at Rebels Haven is advising not to flash Beta BIOS N56BAB01.BST that is on the Tiawan site. He's reporting Windows hanging on start up, and BIOS corruption of the next flash. The corruption renders the system dead.
I think someone got 370ish
what are your temps at that?Quote:
My board works again lol
Latest modded bios on that rebel site.
Funny thing is, it refused to work with 2800+ sempron / 6000+ and my two setts of ddr2, now it works with my sempron 2800+ and dual channel works again
strange board, i have a felling that i will not be able to get the WR with this board.
edit*
must rethink that lol, works flawlesly now.
This is boxed cooled at 1.6V vcore and 2.2V vdimm chipset at 1.300V
370 HTT is not bad at all...:)
good one..
probably some quality air cooler..
Boxed cooler ain't what i call quality :)
I tried to boot at 350Mhz and it seems it's very easy .
Going to drop the muti and see how far i can go :)
Very fine results with that setup BeardyMan :up:
You need something WAY better than stock cooling ;)
it's a different story on water..:D
Guys what can i use for overclocking in windows?:confused:
well, you missed to mention that neither of these two work :)
anyway, clock gen, setfsb, and memset are only utilities i know that can be used in windows..if non of these work you're bios binded..:D
use it for 24/7 settings or 3D Mark, and apply the wr idea to another mobo..
That's the downside of using the latest hw there is, you should try a DFI 590 or Crosshair for your wr attempt. And you have to be ready to kill your ram to make it. With 1000mhz, cas 3 (3,5v or something), and cpu at 3700\3800mhz you should be able to do it
3,5v :O
Omg i can't seem to pass 235mhz regardless of stock cooler or watercooling.
3507mhz is stable in every single bench yet 1single mhz more in bios and it won't load windows :/
OMG i need a clockgen or a tool that clcok in windows :(
with my board not posting, about 2 weeks now since i flashed to the quad core bios. It was time to try again. This time with good luck. Using the on board flash in the bios> Load your floppy with bios. Hit enter and will show the bios version on your floppy. Then TAB, will hightlight update dmi change to yes (page down or up to change. Press TAB again to highlight bios, then load bios.I have changed back and forth a couple of times from quad to dual core and no problems. Maybe we can get rebels haven to mod quad core bios for us. A few more instructions in the bios would help. Hope this helps you guys that have this board
Doing a bit of forum grave digging on this thread to ask if anyone knows if this board will for sure support the 5000+ BE and 2GB DIMMs (as in a 2x2GB Kit) out of the box ? as I need a inexpensive stop gap AM2 board till the dust settles on the 790FX/Phenom situation, and this looks like the best around at the moment for a single video card setup ..
Same here. All the 790fx and Quad mess has given me a headache! I have a am2 5600+ and a set of Firestiks that need a home. Haven't been able to get a motherboard yet. So many other things that needed paid first. I would get a 5000 or 6400 BE of this board will support it and jyst wait until all stuff get fixed.
New Bios out today C21